CYP EL-8500VA Manual de usuario

EL-8500VA

9 x 2 Multi-format Presentation Scaler with HDBT

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 15/10/2019 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................7

4. System Requirements ...........................7

5. Features..................................................8

6. Operation Controls and Functions .......9

6.1 Front Panel................................................... 9

6.2 Rear Panel...................................................10

6.3 IR Cable Pinouts .......................................13

6.4 RS-232 Pinout and Defaults.................13

6.5 OSD Menu ..................................................14

6.6 WebGUI Control .......................................33

6.7 Telnet Control............................................47

6.8 Serial and Telnet Commands...............48

7. Connection Diagram .......................... 73

8. Specifications...................................... 74

8.1 Technical Specifications ........................74

8.2 Video Specifications................................76

8.3 Audio Specifications...............................80

8.4 Cable Specifications ...............................82

8.5 HDBaseT Features....................................83

9. Acronyms............................................. 84

1. INTRODUCTION

This 9 by 2 multi-format scaling switcher provides HDMI, USB-C, HDBaseT,

and VGA inputs which can be freely selected for output at a scaled

resolution of the user’s choosing over the mirrored HDMI and HDBaseT

outputs. The HDMI and USB-C ports support resolutions up to 4K@60 (4:4:4,

8-bit) while the HDBaseT output supports automatic colour subsampling

of 4K50/60(4:4:4) sources to 4K50/60(4:2:0). The VGA inputs support

resolutions up to WUXGA. The HDBaseT output provides a great solution to

extend your audio and video up to 100 metres over a single run of Cat.6A

cable as well as providing PoH power to compatible HDBaseT Transmitters

and Receivers.

This unit also includes multiple analogue stereo audio inputs and a

microphone input along with an amplified analogue stereo output to

provide a range of audio routing and mixing flexibility. The built-in audio

mixer function allows the user to mix audio from any LPCM 2.0 source

with the microphone input for presentation or lecture usage. The ability

to switch back and forth between mixed and non-mixed audio greatly

simplifies the presentation experience.

A trigger input interface is also provided to allow the easy addition of a

remote control keypad, or other trigger-supporting products, which can

be installed within a podium or within a table in a conference room or

classroom. This interface can allow the user to activate functions with

the simple press of a button. Standard control is available via front panel

buttons with an On-Screen Display (OSD), WebGUI, Telnet, and RS-232

making it exceptionally versatile.

2. APPLICATIONS

Lecture room display and control

Showroom display and control

Meeting room presentation and control

Classroom display and control

3. PACKAGE CONTENTS

1× HDMI/HDBaseT/USB-C/VGA to HDMI/HDBaseT Scaler

1× 24V/6.25A DC Power Adapter

1× 3.5mm to IR Blaster Cable

1x 3.5mm to IR Extender cable

1× Shockproof Feet (Set of 4)

1× Operation Manual

4. SYSTEM REQUIREMENTS

HDMI/USB-C source equipment such as media players, video game

consoles or set-top boxes.

VGA source equipment such as PCs, laptops or set-top boxes.

HDMI receiving equipment such as an HDTV, monitor or audio

amplifier.

Analogue audio receiving equipment such as audio amplifiers or

powered speakers.

Compatible HDBaseT transmitters and receiver with PoH support is

recommended.

The use of Premium High Speed HDMI cables, and industry standard

Cat.6, Cat.6A or Cat.7 cables is highly recommended.

5. FEATURES

HDMI 2.0 and DVI 1.0 compliant

HDCP 1.x and 2.2 compliant

9 video inputs (1×USB-C, 2×HDBaseT, 4×HDMI, 2×VGA)

2 mirrored video outputs (1×HDMI, 1×HDBaseT)

Supports switching and scaling of all AV inputs for display over the

mirrored HDMI and HDBaseT outputs

Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) digital

video input (HDMI, USB-C) and output (HDMI)

VGA input supports resolutions up to 1080p60/WUXGA (RB)

HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) or

4K@30Hz (4:4:4, 8-bit). 4K@50/60Hz (4:4:4, 8-bit) or 4K@any (10/12-bit)

sources will be automatically colour space converted to fit within the

available bandwidth

Supports Deep Colour input and output up to 12-bit (Bypass only)

Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

(HDMI Bypass only)

HDBaseT inputs/output extend video, audio, and data over a single

Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K

when using Cat.6a/7

Supports pass-through of many audio formats including LPCM (up to

8 channels), Bitstream and HD Bitstream

Audio mixer function allows the mixing of audio from any LPCM 2.0

audio source with the microphone input

Trigger Control Keypad support for easy, single-button, function

activation (Optional)

Supports standard PoH (PSE) from the HDBaseT output and HDBaseT

inputs to connected HDBaseT (PD) transmitters and receiver

(compatible transmitters/receivers only)

Comprehensive EDID and HDCP management

Controllable via front panel controls with OSD, RS-232, Telnet, WebGUI,

and triggers

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

USB-C CAT 1CAT 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 VGA 1 VGA 2

MIC

SELECT

MIX

VIDEO IN AUDIO OUT

POWER HDMI OUT

AMPLIFIER

LINE OUT

SELECT

MENU ENTER

WUXGA

1080P

BYPASS

EL-8500VA

VOLUME

1 2 3 4 5 6 7 8 9 10

1POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

2MENU Button: Press to enter the OSD menu, or to back out from

menu items.

3MINUS (-) Button: Press to move down or adjust selections within

OSD menus.

4PLUS (+) Button: Press to move up or adjust selections within OSD

menus.

Note: Pressing the “+” button when not in a menu will toggle the video

freeze feature.

5ENTER Button: Press to confirm a selection within the OSD or to go

deeper into a menu item.

Note: Pressing “ENTER” and “+” together will reset the output resolution to

WUXGA (1920×1200@60Hz). Pressing “ENTER” and “-” together will reset

the output resolution to 1080p@60Hz.

6HDMI OUT BYPASS Button & LED: Press this button to enable or

disable the HDMI video Bypass function. When bypass is enabled, the

LED will illuminate.

7VIDEO IN Buttons & LEDs: Press any of these buttons to switch

immediately to the corresponding input. An LED will illuminate to

indicate which source is currently selected.

8AUDIO OUT SELECT Button & LEDs: Press this button to select the

microphone mix mode of the unit. The LED will illuminate to indicate

the current mix mode. When both LEDs are off, the mixer is disabled.

Note: Activating Mixer On mode or MIC Only mode will automatically

disable HDMI Out Bypass mode.

9VOL. Button & LEDs: Press this button to select which audio output’s

volume is controlled by the volume knob. When both LEDs are off, the

knob controls the HDMI audio output (LPCM 2.0 only).

10 VOL. Rotary Knob & LEDs: Rotating the knob increases or decreases

the currently selected audio output’s volume level. The LED bar will

change according to the current level. Pressing in on the knob toggles

the audio mute function.

6.2 Rear Panel

ANALOGUE AUDIO

INPUT

USB-C

MIC IN

123456

IR IN IR OUT

L+

L+ L- R+ R-

L- GR+R-

CAT5e/6/7 1CAT5e/6/7 2 HDMI 1HDMI 2HDMI 3HDMI 4 VGA 1VGA 2HDMI OUT CAT5e/6/7 OUT

RS-232

SERV. LAN DC 24V

RELAY

OFF

48V

24V

TRIGGER IN

AUDIO OUT

TX1

TX2

RX1

RX2

109 11 12 13 14 15 16 17

1 2 3 4 5 6 7 8

1MIC IN Port & 48V/OFF/5V Switch: Connect to a standard

microphone using a 6.35mm plug. Set the switch based on the

phantom power requirements of the connected microphone.

Note: If no phantom power is required, this switch should remain in the

“Off” position to avoid potential damage to connected equipment.

2Analogue AUDIO INPUT 1~6 Ports: Connect to the analogue stereo

output of a device such as an audio player or PC.

Note: By default, Analogue Audio 1 is paired with VGA input 1 and

Analogue Audio 2 is paired with VGA input 2.

3AUDIO OUT 5-pin Terminal Block: Connect to powered speakers or

an amplifier for analogue stereo audio output.

4AUDIO OUT L/R 2-pin Terminal Blocks: Connect to unpowered 4Ω

speakers for analogue stereo audio output. Up to 20W of power is

provided to each speaker.

5TRIGGER IN 10-pin Terminal Block: Connect to the Trigger Control

Keypad (Optional) or any device with trigger switch functionality

such as window security alarms, motion detectors, door switches, etc.

Each of the 8 triggers will activate an assigned unit function when

triggered.

Note: A minimum of 5V DC is required to activate a trigger.

Tabla de contenidos

Otros manuales de Convertidor de medios de CYP

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario

Expert

Expert EX-9543 Manual de usuario