CYP CSC-6011 Manual de usuario

CSC-6011

4K UHD+ HDMI and PC/HD to HDMI Scaler

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

VR0 04/07/16 Preliminary release

VR1 23/09/16 Supported resolution

VS2 14/11/16 Updated text/diagrams

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 4

6.3 OSD Menu.................................................. 5

7. Connection Diagram ......................................9

8. Specications ................................................10

8.1 Technical Specications ........................ 10

8.2 Video Specications............................... 11

8.2.1 Supported Resolutions................... 11

8.2.2 Scaled Resolutions ......................... 12

8.3 Audio Specications............................... 13

9. Acronyms .......................................................14

1. INTRODUCTION

This is a compact yet versatile 4K UHD HDMI and PC/HD to HDMI

Scaler. It accepts a wide range of resolutions from 480i up to 1080p/

WUXGA for PC/HD and up to 4K@60Hz (4:4:4) for HDMI with the ability

to scale the output to a selectable resolution up to 4K@60Hz (4:4:4)

with simultaneous de-embedded, digital optical and analog audio

output. 3-D motion adaptive de-interlacing and frame rate conversion

is supported as well.

Integrated EDID management options allow for control over the

way connected sources detect the unit. Also included is an auto

source detection and switching feature allowing the unit to switch

automatically to the most recently connected source, or to switch to

the alternate source if the current one becomes disconnected.

This unit has a comprehensive OSD menu that provides the user with

easy access to all settings. An integrated hot-key design makes for

rapid access to common functions such as input selection and audio

volume. This is an ideal device to integrate previously incompatible

sources and displays or to provide a exible auto-detecting input

point for your boardroom meeting presenter’s devices.

2. APPLICATIONS

• Home Theater with 4K@60Hz HDMI media player and VGA home PC

with output to a 4K@60Hz TV

• Boardroom presenter connection point with auto-switching to new

presenters and output to a large 4K display

• Lecture Hall, Showroom or Classroom signal display

• Displaying analog PC/HD contents on an HDMI display with audio

3. PACKAGE CONTENTS

• 1×HDMI/VGA to HDMI Scaler

• 1×5 V/2.6 A Power Adaptor

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI or VGA source equipment such as media players, video

game consoles, set-top boxes, PCs or laptops

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers

• The use of “Premium High Speed HDMI” cables is highly

recommended

5. FEATURES

• HDMI 2.0 with 4K@60Hz (4:2:0 and 4:4:4) support, DVI 1.0 compliant

• HDCP 2.2 compliant

• Supports PC input resolutions from VGA~WUXGA and HD input

resolutions from 480i~1080p@60Hz

• Supports HDMI input resolutions from 480i~4K@60Hz (4:4:4, 8-bit)

• Supports HDMI output resolutions from 640×480@60Hz up to

4096×2160@60Hz (4:4:4, 8-bit)

• Analog YUV input is supported with the use of a 15-pin to 3-RCA

adapter

• 50/60Hz frame rate conversion

• 3-D motion adaptive de-interlacing and 3:2/2:2 pull-down detection

and recovery

• Can automatically detect and output the preferred resolution and

refresh rate reported by the EDID of the connected display (NATIVE

output mode)

• EDID management options including multiple pre-dened EDIDs

and EDID pass-through

• Comprehensive output picture adjustments (contrast, brightness,

hue, saturation, sharpness, RGB (color tone) level and aspect ratio

size)

• Supports LPCM 2.0 digital/analog audio input and LPCM 2.0 digital/

analog output. The audio source is selected via the OSD and output

simultaneously over the HDMI, optical and phone jack connections

• Supports rmware updates via USB

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

OUT XGA

MEN

NTER

OPTICAL HDMIAUDIO

720P

1 2 3 4 5 6

1OPTICAL OUT: Connect to powered speakers or an amplier for

digital audio output using an appropriate optical cable. Supports

LPCM 2.0 audio only. Bitstream formats will be muted.

2HDMI OUT: Connect to HDMI TVs, monitors or ampliers for digital

video and audio output.

Note: When outputting 4K@60Hz HDMI signals, a compatible

4K@60Hz display is required. The use of “Premium High Speed

HDMI” cables is highly recommended.

3AUDIO OUT: Connect to powered speakers or an amplier for

stereo analog audio output. Supports LPCM 2.0 audio only.

Bitstream formats will be muted.

4MENU: Press to enter the OSD menu, or to back out from menu

items.

Note: Pressing “MENU” and “+” together will reset the output

resolution to XGA (1024x768@60Hz). Pressing “Menu” and “-”

together will reset the output resolution to 720p@60Hz.

5-/+: Press to move up and down or adjust selections within menus.

When not in the OSD press “-” to adjust the analog audio output

volume (with on screen level indicator). Press “+” to activate the

Auto Adjust function for VGA sources.

6ENTER: Press to conrm a selection or to go deeper into a menu

item within the OSD. When not in the OSD this button switches

between the 2 inputs.

Note: Pressing “ENTER”, “+” and “-” together will perform a factory

reset on the unit.

6.2 Rear Panel

DC 5V

POWER

PC HDMIAUDIO

OPTICAL

SERV.

1 2 3 4 5 6 7

1PC IN: Connect to VGA source equipment such as a PC or laptop.

YUV sources, such as DVD players, are also supported with the use

of a 15-pin to 3-RCA adapter.

2HDMI IN: Connect to HDMI source equipment such as a media

player, game console or set-top box. DVI sources are also

supported with the use of an HDMI to DVI adapter.

Note: When outputting 4K@60Hz HDMI signals, a compatible

4K@60Hz display is required. The use of “Premium High Speed

HDMI” cables is highly recommended.

3AUDIO IN: Connect to the stereo analog output of a device such

as a CD player or PC.

4OPTICAL IN: Connect to the optical audio output of a device such

as a media player or game console using an appropriate optical

cable.

5SERVICE: This slot is reserved for rmware update use only.

6DC 5V: Plug the 5V DC power adapter into the unit and connect it

to an AC wall outlet for power.

7POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

6.3 OSD Menu

MAIN MENU SUB MENU PARAMETER DEFAULT

PICTURE CONTRAST 0~100 50

BRIGHTNESS 0~100 50

EXIT

FINETUNE

[HDMI/YPbPr

source only]

HUE 0~100 50

SATURATION 0~100 50

SHARPNESS 0~100 50

NR OFF OFF

LOW

MIDDLE

HIGH

EXIT

FINETUNE

[PC source only]

PHASE 0~100

CLOCK 0~100

H-POSITION 0~100

V-POSITION 0~100

EXIT

COLOR RED 0~100 50

GREEN 0~100 50

BLUE 0~100 50

EXIT

OUTPUT SOURCE PC/YPbPr HDMI

HDMI

RESOLUTION* 640×480@60 NATIVE

800×600@60

1024×768@60

1280×768@60

1360×768@60

1280×800@60

Otros manuales para CSC-6011

Tabla de contenidos

Otros manuales de Convertidor de medios de CYP

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario

Expert

Expert EX-9543 Manual de usuario