CYP SY-401V Manual de usuario
SY-401V
PC/HD to Video Scan Converter
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
VR0 07/04/11 Preliminary Release
VS1 25/04/12 Updated format/diagrams
v1.01 08/08/14 Updated Resolution Table
v1.02 08/08/14 Amended OSD with Info. ON/OFF
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Top Panel ...................................................... 8
6.2 Left Panel...................................................... 9
6.3 Right Panel................................................... 9
6.4 OSD Menu ..................................................10
6.5 Supported Input Resolutions..............12
7. Connection Diagram .......................... 13
8. Specications...................................... 14
9. Acronyms........................................ 15wq
6
1. INTRODUCTION
The SY-401V PC/HD to Video Scan Converter is designed to down
scale PC/Component source to an analogue CVBS (NTSC,PAL) signal.
Supporting PC resolution up to WUXGA@60hz, this device is ideal for
applications with multiple CCTV cameras, as the scaler enables the user
to connect new video sources to older displays. Features such as 3D noise
reduction, frame rate conversion, adaptive contrast enhancement, and
a On Screen Display (OSD) allow for easy adjustment to maximise the
output display.
2. APPLICATIONS
Security camera display
Display PC signal on a non-VGA CRT display
Display PC signal on a non-VGA LCD display
3. PACKAGE CONTENTS
PC/HD to Video Scan Converter
Power Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as PC/component camera (RGBHV/YPbPr)
signal with D-Sub 15pin or component adaptor cable and output to TV
with CVBS input jack and connection cable.
7
5. FEATURES
Converts the video signal from PC/component source to NTSC or PAL
signal
Accepts a wide range of component input resolutions from 480i to
1080p@60 Hz and PC input resolutions from VGA to WUXGA@60RB
3D noise reduction in both temporal and spatial domain
Frame rate conversion
Adaptive contrast enhancement
OSD Display
Overscan and underscan adjustment
Phase and Aspect adjustment
No software installation required
Compact and elegant design
NOTE: the following modes are not supported:
-Interlace source signal conversion between 50/60Hz
-480i and 1080i@60 to PAL frame rate conversion
-576i and 1080i@50 to NTSC frame rate conversion
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Top Panel
1 2
1
NTSC/PAL MENU (Hold): Press this button to bring up the On-Screen
Display (OSD) which will display the input timing and the output TV
format information.
When the OSD is displayed, press the button again to switch the
output TV system from NTSC to PAL and from PAL to NTSC.
Press this button for 3 seconds the OSD will bring up the selection
menu. Press it sequentially to select the required setting.
2
Power LED: This LED will illuminate in RED when the unit is connected
to the power supply.
9
6.2 Left Panel
1
PC IN
1
PC IN: Connect to the source equipment such as a PC, laptop or digital
camera with D-sub 15pin cable (VGA) or adaptor converter cable
(Component).
6.3 Right Panel
12
1
CV OUT: Connect to the output display TV or monitor with RCA cable
for display of the converted composite (CVBS) signal.
2
DV5V: Plug the 5V DC power supply included in the package into the
unit and connect the adaptor to an AC wall outlet.
10
6.4 OSD Menu
IN 640×480 (Input Timing) Press the Menu button
once to bring up the OSD
and display the input (IN) &
Output (OUT) information.
OUT NTSC (Output TV System)
NTSC Press the Menu button
for 3 seconds to bring
up the OSD then press
it repeatedly to move
the OSD cursor to the
desired selection. Once
the selection is made, if
no button is pressed for a
few seconds, the display
on the OSD will disappear
and the display will output
the selected display
mode.
PAL
Underscan 1
Underscan 2
Overscan
Phase Adj. 0~31
Aspect Adj.
Full Screen
Letterbox
Pan & Scan
Auto TV 4:3
Auto TV 16:9
Info OFF
ON
F/W vx.x
Below is the example of the scan selection result.
4:3
Source TV Underscan1 Underscan2 Overscan
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP SY-P290 Manual de usuario
CYP
CYP CP-259H Manual de usuario
CYP
CYP CSC-5500 Manual de usuario
CYP
CYP CPT-385AMN Manual de usuario
CYP
CYP CP-259UHD Manual de usuario
CYP
CYP CUSB-601H Manual de usuario
CYP
CYP DCT-1 Manual de usuario
CYP
CYP DCT-9 Manual de usuario
CYP
CYP CP-302MN Manual de usuario
CYP
CYP AU-1 Manual de usuario
CYP
CYP CDPH-1S Manual de usuario
CYP
CYP CM-398 Manual de usuario
CYP
CYP CPRO-12ES Manual de usuario
CYP
CYP CV-400H Manual de usuario
CYP
CYP CP-255ID Manual de usuario
CYP
CYP SY-CHQV Manual de usuario
CYP
CYP AU-11DM Manual de usuario
CYP
CYP CPRO-2E4KS Manual de usuario
CYP
CYP CSC-5500 Manual de usuario
CYP
CYP CP-268S Manual de usuario
