CYP CDB-5 Manual de usuario
CDB-5
RS232 Level Shift Board
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version VR1.0 January 2012
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 10/07/13 Preliminary release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................3
7 RS-232 Protocols ..................................... 3
8 Connection and .................................... 4
9. Specications ........................................ 5
1
1. INTRODUCTION
This special RS232 level shift board is design to congurate RS232
command between PC and control device, here it is mainly for
specic TV wall system. Allowing the PC protocol to be converted
and readable to the control device and make activate the exact
command action.
2. APPLICATIONS
• TV wall control for CVW-11HS & CVW-42AK2 series
3. PACKAGE CONTENTS
• 1 x RS232 Level Shift Board
• 1 x Standard A to Mini-B USB connectivity cable
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipments such as PC/Notebook devices and and
output to TV wall system box.
5. FEATURES
• Baoud Rate testing
• RS232 command conguring
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
RS232 IN
USB 5V
POWER
1 2 3
1RS232 IN:
Connect from PC/laptop or any RS232 command system with
D-Sub 9pin male null cable for RS232 command sending to control
device.
2USB 5V:
Connect the USB cable included in the package from the PC/
laptop or any USB supported power adaptor for power supply to
the device.
3POWER:
When the device is connected with power supply this LED will
illuminate.
3
6.2 Rear Panel
RS232 OUT
CDB-5
RS232 LEVEL SHIFT BOARD
1
1RS-232 OUT:
Connect to RS-232 equipped device for RS232 command receiving
with D-Sub 9pin female null cables.
7 RS-232 PROTOCOLS
CDB-5 IN
►
◄
CDB-5 OUT
PIN Denition PIN Denition
1 NC 1 NC
2TxD 2RxD
3RxD 3TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 Connect to Pin 8 7 Connect to Pin 8
8 Connect to Pin 7 8 Connect to Pin 7
9 NC 9 NC
Baud Rate: 110bps~921600bps
Data Bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
4
8 CONNECTION AND
RS232 OUT
CDB-5
RS232 LEVEL SHIFT BOARD
RS232 IN
USB 5V
POWER
HDMI IN AUDIO IN PC IN RS 232 IN RS 232 OUT IR IN
RS232 OUT
CDB-5
RS232 LEVEL SHIFT BOARD
RS232 IN
USB 5V
POWER
HDMI IN AUDIO IN PC IN RS 232 IN RS 232 OUTIR IN HDMI IN AUDIO IN PC IN RS 232 IN RS 232 OUTIRINHDMI IN AUDIO IN PC IN RS 232 IN RS 232 OUTIRINHDMI IN AUDIO IN PC IN RS 232 IN RS 232 OUTIR IN
POWER
2X2 3X3
3X2
4x3 5x5
RETURN MENU
HDMI VGAU/OVER
720P OPTION 1080P
POWEROFF
CR-98
FULL
OK
4X4
SINGLE
HDMI OUT
DC 5V
AUDIO OUT
L
R
HDMI OUT
DC 5V
AUDIO OUT
L
R
HDMI OUT
DC 5V
AUDIO OUT
L
R
HDMI OUT
DC 5V
AUDIO OUT
L
R
Screen ①Screen ②Screen ③Screen ④
CVW-11HS
Rear
CVW-11HS
Front
HDMI Splitter
7m3m 3m
60°
m
m
3m
PC/NB
HD Source
RS-232 Equipped
PC or Notebook
CVW-11HS
HDMI
Input
HDMI
Output
IR Extender
RS-232
Cable
5
9. SPECIFICATIONS
Baud Rate 110bps~921600bps
Input port D-Sub 9pin (Female type)
Output port D-Sub 9pin (male type)
ESD Protection Human body model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Power Supply USB bus power or USB to DC power supply
Dimensions 71(W) x 81.5(D) x 23(H)
Weight 110 g
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature Operating from 0°C ~ 40°C
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 2.5w (Max.)
Otros manuales para CDB-5
1
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP CP-293 Manual de usuario
CYP
CYP CP-268S Manual de usuario
CYP
CYP CP-1261D Manual de instalación
CYP
CYP CLUX-16EN Manual de usuario
CYP
CYP AU-D2 Manual de usuario
CYP
CYP CM-388 Manual de usuario
CYP
CYP CP-251F Manual de usuario
CYP
CYP DCT-4 Manual de usuario
CYP
CYP CP-295N Manual de usuario
CYP
CYP DCT-1 Manual de usuario
CYP
CYP CP-292 Manual de instalación
CYP
CYP AU-1H1DD Manual de usuario
CYP
CYP HDV5 Manual de usuario
CYP
CYP DCT-1D Manual de usuario
CYP
CYP DCT-9 Manual de usuario
CYP
CYP CP-268 Manual de usuario
CYP
CYP CPRO-2E4KS Manual de usuario
CYP
CYP CS-801H Manual de usuario
CYP
CYP CSC-5501TX Manual de usuario
CYP
CYP CSC-6015 Manual de usuario
