CYP AU-D2 Manual de usuario
AU-D2
Digital Co-ax to Optical Converter
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v2.00 21/06/2019 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................6
6. Operation Controls and Functions .......7
6.1 Front Panel................................................... 7
6.2 Rear Panel..................................................... 7
6.3 Left Panel...................................................... 8
6.4 Top Panel ...................................................... 8
7. Connection Diagram .............................9
8. Specifications...................................... 10
9. Acronyms............................................. 11
6
1. INTRODUCTION
The Digital Audio Converter with Dual Outputs will convert between
Coaxial and Optical digital audio formats. This compact and convenient
unit accepts a stereo or surround (up to 5.1 channels) audio signal
through either Coaxial cable or Optical cable, and passes the unchanged
signal to both its Coaxial and Optical output ports. With its built-in signal
enhancement feature, the unit also serves as a repeater of digital audio
signals to extend up to double the transmission distance.
2. APPLICATIONS
Convert an Optical digital signal to a Coaxial digital signal
Convert a Coaxial digital signal to an Optical digital signal
Distribute digital audio to 2 locations
Extend your Optical or Coaxial cable distances
3. PACKAGE CONTENTS
Digital Audio Converter with Dual Outputs
5 V/1.2 A Power Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Digital audio source device such as DVD or CD player with Optical or
Coaxial cables and audio output device such as an amplifier or AV receiver
with Optical or Coaxial digital input.
5. FEATURES
Supports two-way conversion: coaxial to optical or optical to coaxial
Supports input audio signals from 2 channels to up to 5.1 channels,
output signal follows input
Supports signal enhancement of S/PDIF audio and extends the
transmission distance, through coaxial and/or optical cables
Select one input from coaxial or optical input ports, and send
the S/PDIF audio signal to both coaxial and optical output ports
simultaneously
Compact and easy to use
7
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 2
To slink
Coax
In
1Coaxial In: Connect to the output of an S/PDIF digital audio source
device such as DVD player or set-top box, using Coaxial cable.
2Toslink In: Connect to the output of an S/PDIF digital audio source
device such as CD player or Media Streamer, using Optical cable.
6.2 Rear Panel
1 2
Coax
To slink
Out
1Toslink Out: Connect to the input of an S/PDIF digital audio
equipment such as an amplifier, using Optical cable.
2Coaxial Out: Connect to the input of your S/PDIF digital audio
equipment such as an AV Receiver, using Coaxial cable
8
6.3 Left Panel
1 2
DC 5V
To s
Coaxial
1Tos/Coaxial: Selects the current audio source, either optical or coaxial.
2DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC wall outlet.
6.4 Top Panel
1
1POWER LED: The LED will illuminate when the power is connected.
9
7. CONNECTION DIAGRAM
DVD Player
Set-top Box
Digital Audio Input
(Optical)
Digital Audio Output
(Optical)
AV Receiver AV Receiver
Digital Audio Input
(Coaxial)
Digital Audio Output
(Coaxial)
Power
Supply
10
8. SPECIFICATIONS
Input Ports 1×Coaxial (RCA connector)
1×Optical Fiber (TOSLINK connector)
Input Format LPCM 2 CH, Compressed audio Dolby
Digital 2/5.1 CH & DTS 2/5.1 CH
Output Ports 1×Coaxial (RCA connector)
1×Optical Fiber (TOSLINK connector)
Power Supply 5 V/1.2 A switching power adaptor (with
universal plug, CE/FCC/UL certified)
Dimensions 58 mm (W)×46 mm (D)×24 mm (H)
Weight 25 g (Unit only)
Chassis Material Plastic
Silkscreen Colour White
Operating Temperature 0 °C~ 40 °C
Power Consumption 0.7W
Otros manuales para AU-D2
1
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP CLUX-H2SDIA Manual de usuario
CYP
CYP CP-1262DE Manual de usuario
CYP
CYP CPLUS-V11PE8 Manual de usuario
CYP
CYP CDPS-US100R Manual de usuario
CYP
CYP CLUX-DDP Manual de usuario
CYP
CYP PRO-SDIHDMI Manual de usuario
CYP
CYP CLUX-DVI2SDIA Manual de usuario
CYP
CYP CSLUX-300I Manual de usuario
CYP
CYP CPT-380 Manual de usuario
CYP
CYP CS-801H Manual de usuario
CYP
CYP CPCD-3A Manual de usuario
CYP
CYP EL-31C-4K22 Manual de usuario
CYP
CYP CP-255I Manual de usuario
CYP
CYP CP-268S Manual de usuario
CYP
CYP CLUX-18CEC Manual de usuario
CYP
CYP CLUX-H2SDI Manual de instalación
CYP
CYP VHC-1 Manual de usuario
CYP
CYP CLUX-SDI2HS Manual de usuario
CYP
CYP PRO-SDI2H Manual de usuario
CYP
CYP CSC-6015 Manual de usuario
