CYP CH-110TX Manual de usuario
DRAFT
CH-110TX & CH-110RX
HDMI & IR over CAT6 Extender
Operation Manual
Operation Manual
DRAFT
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version 1.0 September 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
DRAFT
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 08/11/13 Preliminary Release
DRAFT
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Transmitter Front and Rear Panels..3
6.2 Receiver Front and Rear Panels .....4
6.3 EQ Selection Chart ..........................4
7. Connection Diagram ............................ 5
8. Specications ........................................ 6
9. Acronyms ............................................... 7
DRAFT
1
1. INTRODUCTION
The HDMI & IR Transmitter and Receiver over ONE CAT6 is a tool for
extending your HDMI & IR signal over long distances to a compatible
display. Instead of using expensive HDMI cables, your existing CAT6
cables/sockets can be utilized to perform functions like transferring 8
bits/ color video and new lossless compressed (Dolby TrueHD, Dolby
Digital Plus and DTS-HD Master Audio) digital audio, with a bandwidth
up to 165MHz. The HDMI & IR Transmitter and Receiver, over ONE CAT6
extender is your substantial HDMI extender tool.
2. APPLICATIONS
• Distribute HDMI & IR signals over long distances
• Showroom display and control
• Hypermarket display and control
• Lecture room display and control
3. PACKAGE CONTENTS
• 1 x HDMI & IR Transmitter
• 1 x HDMI & IR Receiver
• 1 x IR Extender
• 1 x IR Blaster
• 2 x 5V DC Power Supply Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as Blu-ray/DVD player and output
connect to Receiver with HDMI display and CAT6 cable.
DRAFT
2
5. FEATURES
• HDMI, HDCP and DVI compliant
• Supports digital video formats with 3D at up to 24 bits (8 bits/color)
• Supports LPCM 7.1Ch, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission
• Uses CAT6 cable for data/DDC transmission
• Equalizes and recovers incoming TMDS data before re-transmitting
it in optimal quality
• Supports distance up to 45 meters through CAT6 cable with 1080p
8bit
• Supports HDMI input up to 10 meters and output up to 15 meters at
1080p 8bit
• Supports xvYCC
DRAFT
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
IR OUTHDMI IN DC 5V
SERVICE
CAT6 OUT
1 2 3 4 5
1IR OUT: Connect the IR Blaster cable included in the package for
IR signal transmission. Pace the IR blaster in direct line-of-sight of
the equipment to be controlled.
2HDMI IN: This slot is where you connect the HDMI or DVI output port
of your source equipment such as DVD/Blu-ray players or Set-Top-
Box with an HDMI cable or link up with another receiver unit from
the same family type to extend a signal over long distance.
3DC 5V: Connect from 5V DC power supply into the unit and
connect the adaptor to an AC outlet.
4SERVICE: This slot is reserved for factory use only.
5CAT6 OUT: Connect the CAT6 output of the Transmitter with the
CAT6 input of the Receiver with CAT6 cable.
Note:
A. Cable tested with CAT6/23AWG/Solid, using cables of another
types may result in different operating distance.
B. Equipment used in cable distance testing included: PS3 120G, 37”
Philips 8 bit LCD TV and 37” Samsung 12 bit LCD TV.
C. Figures provided in this manual are for reference only, actual
performance may depend on the source and display used along
with the type of cable.
DRAFT
4
6.2 Receiver Front and Rear Panels
IR IN HDMI OUT DC 5V
SERVICE
CAT6 IN
MIN.
EQ
MAX.
0
1 2 3 4 5 6
1IR IN: Connect to the IR Extender for IR signal reception. Ensure
that remote being used is within the direct line-of-sight of the IR
extender.
2HDMI OUT: This slot is to connect the HDMI or DVI input port of your
display such as an HDTV or HD monitor of liked up with another
receiver unit from the same family type to extend a the signal over
long distance.
3DC 5V: Connect from 5V DC power supply into the unit and
connect the adaptor to an AC outlet
4SERVICE: This slot is reserved for factory use only.
5EQ MIN./MAX.: Switch this HDMI equalize wheel from 0~7 to adjust
HDMI signal strength from minimum to maximum.
6CAT6 IN: Connect the CAT6 input of the Receiver with the CAT6
output of the Transmitter with CAT6 cable. The device will learn the
EDID of the display when the power is connected.
6.3 EQ Selection Chart
Position Transmission Distance
00~5M
15~10M
210~15M
315~20M
420~25M
525~30M
630~35M
735~45M (Default)
DRAFT
5
7. CONNECTION DIAGRAM
IR IN HDMI OUT DC 5V
SERVICE
CAT6 IN
MIN.
EQ
MAX.
0
IR OUT HDMI IN DC 5V
SERVICE
CAT6 OUT
1.5m
60°
IR BLASTER
1.5m
60°
IR Extender
7m
3m 3m
60°
m
DVD or Blu-ray Player
Display / Monitor
DRAFT
6
8. SPECIFICATIONS
Transmitter
Input Ports 1 x HDMI, 1 Mini USB (for service only)
Output Ports 1 x IR Blaster, 1 x CAT6
Receiver
Input Ports 1 x IR Extender, 1 x CAT6, 1 x Mini USB (for ser-
vice only)
Output Ports 1 x HDMI
HDMI Cable Distance I: 10M, O: 15M @ 1080p-8bit
CAT6 Cable Distance 45M@1080p-8bit
IR Frequency 30~50kHz
ESD Protection Human body model:
±8kV (air-gap discharge)
±6kV (contact discharge)
Power Supply 5V / 1.2A DC (US/EU standards, CE/FCC/UL
certied)
Dimensions (mm) 78.5(W) x 102(D) x 30(H)/Jacks Excluded
78.5(W) x 108.75(D) x 30(H)/Jacks Included/TX
78.5(W) x 110.5(D) x 30(H)/Jacks Included/RX
Weight(g) 196/Each
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature 0˚C~40˚C/ 32˚F~104˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 4.08W/TX, 2.88W/RX
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Extensor de CYP
CYP
CYP PUV-1230PL-RX Manual de usuario
CYP
CYP PUV-2000TX Manual de usuario
CYP
CYP CH-514TXL Manual de usuario
CYP
CYP CH-506TXPLRXPL Manual de usuario
CYP
CYP PU-507TX-HDVGA Manual de usuario
CYP
CYP PU-USB-KIT Manual de usuario
CYP
CYP CH-1527TXPL Manual de usuario
CYP
CYP PU-506-KIT Manual de usuario
CYP
CYP CH-507TXWPUS Manual de usuario
CYP
CYP IP-6000TXRX Manual de usuario
CYP
CYP CH-1529TXPL Manual de usuario
CYP
CYP PU-515PL-TX Manual de usuario
CYP
CYP PU-1107-KIT Manual de usuario
CYP
CYP CH-501TX Manual de usuario
CYP
CYP CH-1109TX Manual de usuario
CYP
CYP PU-USB-AL Manual de usuario
CYP
CYP CH-1602TX Manual de usuario
CYP
CYP CH-506TXPLBD Manual de usuario
CYP
CYP PU-1107-KIT Manual de usuario
CYP
CYP CH-1107EX Manual de usuario
