CYP CPLUS-V8PT Manual de usuario

CPLUS-V8PT

4K UHD+2×8 HDMI Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

RDV1 22/02/18 Preliminary release

VS1 19/03/18 Final technical review

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 4

6.3 OSD Menu.................................................. 5

6.4 RS-232 Control ......................................... 14

6.5 RS-232 Commands.................................. 14

6.6 EDID Management ................................. 25

6.6.1. EDID Controller .............................. 25

6.6.2. EDID Creator.................................. 27

6.6.3. System ............................................ 28

7. Connection Diagram ....................................29

8. Specications ................................................30

8.1 Technical Specications ........................ 30

8.2 Video Specications............................... 31

9. Acronyms .......................................................36

1. INTRODUCTION

This 4K UHD Switching Splitter with HDCP 2.2 is an advanced solution

providing high performance audio and video support including HDR

and other features dened by the HDMI 2.0a specication. 4K UHD

HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well

as 10/12-bit sources with HDR, are able to be passed along to the 8

outputs. Pass-through of multiple digital audio formats such as LPCM

7.1, Bitstream and advanced HD Bitstream with audio sampling rates

up to 192kHz are also supported. An independent HDCP management

engine for each output ensures stable HDCP performance.

This splitter also includes a special “Group Mode” which allows the

unit to function as two independent 1×4 splitters. When Group Mode

is enabled, each of the 2 HDMI inputs are routed to their own discrete

set of 4 outputs.

When a mixture of displays with different specications are

connected, each output can be congured to scale 4K to 1080p or

apply color space conversion (4:4:4 to 4:2:0), as appropriate. Support

for the CEC “active source” command to periodically reset input

selection on CEC-compatible connected displays is also included. This

unit provides an intuitive set of front panel controls with an OSD as well

as RS-232 control options.

2. APPLICATIONS

• Classroom and Lecture Hall Presentations

• Showrooms and Demo Rooms

• Hotel Lobby information Displays

• Public Commercial Displays

3. PACKAGE CONTENTS

• 1×HDMI Splitter

• 1×5V/3A DC Power Adapter

• 1×Terminal Block (3-Pin) to RS-232 (9-Pin D-Sub) Cable

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• The use of “Premium High Speed HDMI” cables is highly

recommended.

5. FEATURES

• HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible

• HDCP 2.2 and HDCP 1.x compliant

• Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video

signals

• 8 output HDMI splitter with 2 selectable inputs and automatic input

switching support

• Special “Group Mode” allows the unit to function as two

independent 1×4 splitters in a single box

• Supports current 10-bit and 12-bit HDR (High Dynamic Range)

formats

• Supports pass-through of LPCM 7.1, Bitstream and advanced HD

Bitstream audio formats

• Per-output, selectable, 4K to 1080p down-scaling/color space

conversion (4:4:4 to 4:2:0)

• Independent HDCP management engine for each output ensures

stable performance

• Supports eight internal EDIDs, eight external EDIDs copied from

connected devices, and two user provided EDIDs

• Support for the CEC “active source” command to periodically reset

input selection on CEC-compatible connected displays

• Controllable via front-panel buttons with OSD and RS-232

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

GROUP

GROUPIN 2IN 1

MENU ENTER+

UHD+ 2X8 HDMI SPLITTER

IN 1

GROUP 1

OUT AOUT BOUT COUT D

21 3 4 5 76

1IN LEDs: The behavior of these LEDs depend on if Group Mode has

been enabled or not.

AGroup Mode Off

IN 1~2: The illuminated LED indicates which source is currently

selected.

GROUP: This LED will remain off.

BGroup Mode On

IN 1~2: These LEDs will illuminate to indicate that a live source

has been detected on the associated input port. If no source is

detected the LED will remain off.

GROUP: This LED will illuminate.

Note: When the front panel is locked, all 3 LEDs will blink after any

button press.

2MENU: Press to enter the OSD menu, or to back out from menu

items.

Note: Press and hold the “MENU” button for 3 seconds while

connecting the power supply to reset all settings to the factory

defaults.

3− & IN 1: Press to move down or adjust selections within OSD

menus. When not in the OSD menu, press this button to switch to

Input 1.

 Note:Pressing“MENU”and“−”togetherwillforceInput1touse

theInternal“FHD,2CH”EDID.

4 + & IN 2: Press to move up or adjust selections within OSD menus.

When not in the OSD menu, press this button to switch to Input 2.

 Note:Pressing“MENU”and“+”togetherwillforceInput2touse

theInternal“FHD,2CH”EDID.

5 ENTER & GROUP: Press to conrm a selection within the OSD or to

go deeper into a menu item. When not in the OSD menu, press this

button to toggle Group Mode on and off.

Note: Press and hold the “MENU” and “ENTER” buttons together for

3 seconds to lock or unlock the front panel.

6IN 1: Connect to HDMI source equipment such as a media player,

game console or set-top box.

7OUT A~D: Connect to HDMI TVs, monitors or ampliers for digital

video and audio output.

 Note:WhenGroupModeisactive,theseoutputswilldisplayInput1.

6.2 Rear Panel

SERVICE RS-232

POWER

DC 5V

GROUP 2

IN 2

OUT HOUT GOUT FOUT E

1 2 3 4 5

1OUT E~H: Connect to HDMI TVs, monitors or ampliers for digital

video and audio output.

 Note:WhenGroupModeisactive,theseoutputswilldisplayInput2.

2IN 2: Connect to HDMI source equipment such as a media player,

game console or set-top box.

3SERVICE: This port is reserved for rmware update use only.

4RS-232: Connect directly to a PC, laptop or other serial control

device with a 3-pin adapter cable to send RS-232 commands to

control the unit.

5 POWER LED & DC 5V: Plug the 5V DC power adapter into this

port and connect it to an AC wall outlet for power. The LED will

illuminate to indicate the unit is on and receiving power.

6.3 OSD Menu

All primary functions of this unit can be controlled by using the OSD (On

Screen Display) which is activated by pressing the Menu button on

the front of the unit. Use the + (PLUS), − (MINUS), and ENTER buttons to

navigate the OSD menu. Press the Menu button to back out from any

menu item and then press it again to close the menu.

MAIN MENU

Input Switch

Input Information

Output 4K Converter

Output Information

EDID Control

HDCP Control

CEC Control

Remote Control

OSD Setting

System Setting

The individual functions of the OSD will be introduced in the following

section. Items marked in BOLD are the factory default settings.

MAIN MENU LEVEL 2 LEVEL 3

Input Switch Switch to INPUT 1

Input 2

Auto Switch On

OFF

Group Mode On

OFF

1Switch to: Select the input to display when Group Mode is disabled.

 Note:SelectinganInputwhenGroupModeisturnedonwill

disable Group Mode.

2Auto Switch: Enable or disable the auto switch function.

Tabla de contenidos

Otros manuales de Cables y conectores de CYP

Manuales populares de Cables y conectores de otras marcas

Philips

Philips SWA6310 Manual de usuario

StarTech.com

StarTech.com CRJ4550PK Manual de usuario

Nohau

Nohau EMUL-IP2K-PC Manual de usuario

Foxun

Foxun SX-SP144E-HD4K2K Manual de usuario

Philips

Philips SWA3305W Manual de usuario

opticis

opticis Stretch DVIM1-1P0x Manual de usuario

Volkswagen

Volkswagen VAS 6558A Manual de usuario

NEXIBO

NEXIBO N-13 Manual de usuario

Allen-Bradley

Allen-Bradley 1784-u2dhp Manual de usuario

Global Caché

Global Caché Flex Link Blaster Manual de usuario

Hauppauge

Hauppauge USB-Live2 Manual de usuario

Fenix

Fenix MPSV 15 Manual de usuario

BEGA

BEGA 71 085 Manual de usuario

Tesla

Tesla HPWC Manual de usuario

GAMERON

GAMERON LUXURY TV CABLE Manual de usuario

molex

molex Milli-Grid Dual row 87568 Series Manual de usuario

Burndy

Burndy Continental Industries thermOweld CRE-7 Manual de usuario

Chauvet DJ

Chauvet DJ Data Stream 8 Manual de usuario