CTA PAD-UAM Manual de usuario
Specifications
•
•
•
•
•
•
•
•
•
•
Product weight: 1.10 lbs
Device holder adjustment: 4.7" to 8.2"
Loading weight capacity: <= 2.20 lbs
C-clamp adjustment: 0.27" to 1.49"
Full height (from base to center of holder): 18"
Package Contents
2-In-1 Tablet holder Wall Stand - Black/White
Safety information:
Do not wash with hot water
Do not place the sucon grip on a rough or uneven surface
Do not place the sucon grip on a surface prone to vibraon or movement
Keep out of reach of children
C-clamp
Sucon cup
Wire clip (x4)
3-in-1 allen key
•
•
•
•
•
Installaon Guide
Product Layout
6.89"
9.92"
4.53"3.94"
11.61"
4.72"~8.27"
Key Features & Benefits
•Full moon arculang tablet/smartphone
desktop mount frees you from holding the
device to maximize your comfort while
reading arcles or watching videos
•Retractable holding bracket expands up to
8.2" with side openings allows easy device
installing/removing and cable connecon
•Fits most 7" to 12" tablets, including iPad,
iPad Mini, iPad Air and Samsung Tab series
•Supports mul-direcon 360°rotate, swivel,
and lt for the best ergonomic viewing
posion
•Arculang aluminum arm allows up to
13" height adjustment
•Includes both c-clamp and heavy-duty sucon
cup for easy and secure installaon onto most
surfaces without drilling. Convenient C-clamp
knob accessible from the top for easy setup
•Protecve pads fully integrated into device
holder and clamp protects device from
scratching, falling or slipping
PAD-UAM
Ultra-Light Arm Mount with
Clamp and Suction Bases
for Tablets and Smartphones
Installation Instructions
C-clamp Mount Setup
1. Turn the C-clamp screw counter-clockwise unl
the opening is wide enough to fit around desk or
table edge.
2. Turn C-clamp screw clockwise to ghten and affix
C-clamp to desk or table edge.
3. Slide the arm mount into the top of the C-clamp
and align the holes.
4. Insert the arm mount fastener screw and turn
clockwise to ghten.
clamp screw
fastener screw
fastener screw
Suction Mount Setup
1. With the semi-circle sucon lock in vercal
posion, place the sucon grip firmly against
surface.
2. Fold the semi-circle sucon lock into horizontal
posion to lock the sucon grip in place.
3. Slide the arm mount into place on the top of
the sucon grip and align the holes.
4. Insert the arm mount fastener screw and turn
clockwise to ghten.
Adjustment & Cable Management
Adjusting the Arm Mount:
Adjust to the desired poson using the included 3-in-
1 allen key.
3mm
230o
180o
300o
360o
360o
180o
3mm
2.5mm
2.5mm
2.5mm
3-in-1 allen key
4mm
Device Holder:
Adjust the width to fit your tablet or smartphone.
Cable Management System:
Arrange the cables into the cable covers and down
the tube using the included wire clips.
The sucon grip will accumulate dirt and dust with regular use and should be cleaned with
cold water every 2 months. This will ensure that the sucon grip maintains full strength.
Tabla de contenidos
Otros manuales de Rack y soporte de CTA
CTA
CTA PAD-SHFS Manual de usuario
CTA
CTA PAD-HGTSB Manual de usuario
CTA
CTA PAD-CFWM Manual de usuario
CTA
CTA PAD-CHKWDC Manual de usuario
CTA
CTA PAD-PARAPOSW Manual de usuario
CTA
CTA PAD-ASKP Manual de usuario
CTA
CTA PAD-CHKB Manual de usuario
CTA
CTA PAD-SSMA Manual de usuario
CTA
CTA PAD-FTSU Manual de usuario
CTA
CTA PAD-VPOS1W Manual de usuario
CTA
CTA PAD-KMS Manual de usuario
CTA
CTA AUT-VDMC Manual de usuario
CTA
CTA PAD-SWM Manual de usuario
CTA
CTA PAD-ASK13B Manual de usuario
CTA
CTA PAD-UATPB2 Manual de usuario
CTA
CTA PAD-FTS9 Manual de usuario
CTA
CTA ADD-PARAFS Manual de usuario
CTA
CTA PAD-PARAF1GT Manual de usuario
CTA
CTA CP-CSWMHW Manual de usuario
CTA
CTA ADD-2VDMB Manual de usuario
