Crestron BB-1000L Manual de usuario

Crestron BB-1000L

Wall Mount Back Box

Installation Guide

Crestron BB-1000L Wall Mount Back Box

Contents

Wall Mount Back Box: BB-1000L 1

Description.................................................................................................................................1

Setup ..........................................................................................................................................4

Assembly.....................................................................................................................4

Mounting .....................................................................................................................4

Installation...................................................................................................................6

Other Mounting Option Accessories ...........................................................................7

Resources...................................................................................................................................8

Industry Compliance ...................................................................................................8

Reference Documents..................................................................................................8

Further Inquiries .......................................................................................................... 8

Future Updates ............................................................................................................ 8

Return and Warranty Policies ....................................................................................................9

Merchandise Returns / Repair Service ........................................................................ 9

CRESTRON Limited Warranty...................................................................................9

All brand names, product names and trademarks are the property of their respective owners.

Installation Guide - DOC. 6060B Contents •i

Crestron BB-1000L Wall Mount Back Box

Wall Mount Back Box: BB-1000L

Description

The BB-1000L is a UL®-listed pre-construction mounting option for the Crestron®

APAD LCD controller. It is designed to be installed before the drywall is put up. The

table below lists all parts included with the BB-1000L.

NOTE: If mounting into a material other than drywall (for example, wood lectern,

concrete, or rock) use the cutout template, available in the post-construction kit

WMKM-1000L or WMKT-1000L.

NOTE: For concrete and rock mounting material, allow for proper ventilation before

mounting the controller.

Supplied Hardware for the BB-1000L

DESCRIPTION PART NUMBER QUANTITY

Assembly, Wall Mount, Back Box 4505162 1

Metal, Plate, Blank 2004826 1

Screw, #04-40 x 2”, Pan, Phil 2018793 4

Screw, #08-8B x 1/4”, Pan, Phil 2007277 1

The mounted view of the BB-1000L is shown in the following illustration.

BB-1000L Mounted View (Optional Cover Plate Attached)

Installation Guide - DOC. 6060B Wall Mount Back Box: BB-1000L •1

Wall Mount Back Box Crestron BB-1000L

The dimensions of the BB-1000L are shown below and on the next page.

Dimensional Drawing (Fully Assembled without Cover Plate)

3.25 in

(8.26 cm)

7.16 in

(18.19 cm)

0.06 in

(0.16 cm)

1.44 in

(3.66 cm)

3.74 in

(9.49 cm)

6.20 in

(15.75 cm)

3.95 in

(10.02 cm) 6.35 in

(16.13 cm)

4 7/16 in

(112 mm) 3 1/2 in

(89 mm)

2 1/2 in

(63 mm)

1/2 in

(13 mm)

1/8 in

(3 mm)

3 11/16 in

(94 mm)

4 3/8 in

(112 mm)

4 9/16 in

(116 mm)

NOTE: Knockout holes are intended for Class 2 wiring only and are ½” and ¾”

diameter.

2 •Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060B

Crestron BB-1000L Wall Mount Back Box

Dimensional Drawing - Cover Plate

4.74 in

(12.03 cm)

4.65 in

(11.82 cm)

0.03 in

(0.08 cm)

Installation Guide - DOC. 6060B Wall Mount Back Box: BB-1000L •3

Wall Mount Back Box Crestron BB-1000L

Setup

Assembly

Required Tools:

• #2 Phillips tip screwdriver

The back box mounting enclosure assembly comes fully assembled except for a

grounding screw. Complete the following procedure in the order provided.

1. Remove knockouts as required.

2. Attach the supplied #08-8B self-tapping screw to back box mounting

enclosure assembly for grounding.

NOTE: #08-8B self-tapping screw (2007277), supplied for grounding purposes, is

installed in the rear of the back box mounting enclosure assembly.

Mounting

Required Tools and Materials:

• #2 Phillips tip screwdriver or hammer

• Level

• Standard drywall screws or nails (not included)

CAUTION: Allow an air gap of at least 12 inches (30.48 cm) in the wall cavity

above and below the controller for heat dissipation.

NOTE: If your installation is not on wooden studs, be sure to consider the needs of

your particular situation. For example, screw type may vary for steel studs, etc.

Complete the following procedure (refer to illustrations on the next page) to mount

the back box.

1. Position the back box against the stud so that the extended edge of the

attached mounting plate covers the front edge of the stud. Be sure that the

side of the back box is also against the side of the stud.

2. Use the level and verify that the back box is horizontal. Leveling must be

done before proceeding.

3. Attach the back box to the left or right side of the stud with standard

drywall screws or nails (not included). If mounting to the left side of a stud,

the back box must be turned over so that the extended edge of the attached

mounting plate is on the right side.

4. Feed cables through knockout holes.

NOTE: This assembly should use Class 2 wiring only.

4 •Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060B

Crestron BB-1000L Wall Mount Back Box

Mounting the Back Box

BACK BOX MOUNTING

ENCLOSURE ASSEMBLY

(4505162)

ATTACHED

MOUNTING PLATE

NOTE: BE SURE THE

ASSEMBLY IS LEVEL WHEN

MOUNTED.

Mounted View with Cover Plate (Mounting Example Prior to Drywall Installation)

NOTE: BACK BOX IS TO BE

COVERED WITH DRYWALL

AND THEN THE CUTOUT

MADE AROUND THE INSIDE

OF THE OPENING.

BE SURE TO LEAVE THE

FOUR TAPPED HOLES ON

THE FRONT OF THE BOX

EXPOSED TO ACCEPT THE

MOUNTING SCREWS.

SCREWS (4) #04-40 x 2"

PAN HEAD (2018793)

COVER PLATE (2004826)

TO COVER CUTOUT IN DRYWALL

BEFORE CONTROLLER IS INSTALLED

(MAY BE REQUIRED BY LOCAL

BUILDING CODES)

ENSURE THAT THESE

SURFACES ARE FLUSH

Installation Guide - DOC. 6060B Wall Mount Back Box: BB-1000L •5

Wall Mount Back Box Crestron BB-1000L

NOTE: Cut the drywall along the inside edge of the front of the back box. The

labels on the front of the back box indicate the perimeter of the opening that should

be cutout.

NOTE: The four tapped holes on the front of the back box must be exposed to

accept the controller mounting screws. These holes are found beneath the drywall

just outside the four corners of the opening made by cutting out the drywall. Refer

to the NOTE in “Mounted View with Cover Plate” shown on previous page.

Installation

Complete the installation by either installing the controller, leaving the hole open

(if permitted by local building codes) or installing the optional cover plate with the

included #04-40 x 2” screws. If the controller is to be installed, refer to the latest

revision of the APAD Installation and Operations Guide (Doc. 6455) for installation

instructions. The document is available from the Crestron website

(http://www.crestron.com/manuals). Refer also to the following comprehensive

illustration.

Controller Mounting – Exploded View

DRYWALL

BB-1000L

APAD

MOUNTING SCREWS

(4) #04-40 X 2"

(2018793)

6 •Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060B

Crestron BB-1000L Wall Mount Back Box

Other Mounting Option Accessories

If too much of the mounting plate is exposed after the drywall is cut, you may need

to patch the area. Crestron provides the following accessories:

• MMK-1000L (Doc. 6062) - for larger repairs and to fill in larger

irregularities around the opening (requires plastering).

• TMK-1000L (Doc. 6063) - for smaller repairs and to provide a smooth edge

at the opening. This option provides a finished appearance and is preferred

when wallpaper is hung.

The manuals for the MMK-1000L and TMK-1000L are available from the Crestron

website.

Installation Guide - DOC. 6060B Wall Mount Back Box: BB-1000L •7

Wall Mount Back Box Crestron BB-1000L

Resources

Industry Compliance

This product is Listed to applicable UL Standards and requirements by Underwriters

Laboratories Inc.

(E227280)

As of the date of manufacture, the BB-1000L has been tested and found to comply

with specifications for CE marking marking and standards per EMC and

Radiocommunications Compliance Labelling.

Reference Documents

The latest version of all documents mentioned within the guide can be obtained from

the Crestron website (http://www.crestron.com/manuals). This link will provide a list

of product manuals arranged in alphabetical order by model number.

List of Related Reference Documents

DOCUMENT TITLE

APAD Wall Mount LCD Controller

MMK-1000L and WMKM-1000L Mud Mount Kits

TMK-1000L and WMKT-1000L Trim Ring Mount Kits

Further Inquiries

If you cannot locate specific information or have questions after reviewing this

guide, please take advantage of Crestron's award winning customer service team by

calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].

For assistance in your local time zone, refer to the Crestron website

(www.crestron.com/offices) for a listing of Crestron worldwide offices.

You can also log onto the online help section of the Crestron website

(www.crestron.com/onlinehelp) to ask questions about Crestron products. First-time

users will need to establish a user account to fully benefit from all available features.

Future Updates

As Crestron adds improvements to the BB-1000L additional information may be

made available as manual updates. These updates are solely electronic and serve as

intermediary supplements prior to the release of a complete technical documentation

revision.

Check the Crestron website periodically for manual update availability and its

relevance. Updates are identified as an “Addendum” in the Download column.

8 •Wall Mount Back Box: BB-1000L Installation Guide - DOC. 6060B

Otros manuales para BB-1000L

Tabla de contenidos

Otros manuales de Rack y soporte de Crestron

Crestron

Crestron MMK-4000L Manual de usuario

Crestron

Crestron MMK-4L Manual de usuario

Crestron

Crestron CNWM-29A Manual de usuario

Crestron

Crestron WMK-3200 Manual de usuario

Crestron

Crestron CBLR Series Manual de usuario

Crestron

Crestron TS-70 Series Manual de usuario

Crestron

Crestron MMK-3100L Manual de usuario

Crestron

Crestron TMK-2000L Manual de usuario

Crestron

Crestron TMK-1000L Manual de usuario

Crestron

Crestron BB-1000L Manual de usuario

Crestron

Crestron TSW-770-MUMK Manual de usuario

Crestron

Crestron TSW-730-MSMK Manual de usuario

Crestron

Crestron RMK-8L Manual de usuario

Crestron

Crestron RMK-1500 Manual de usuario

Crestron

Crestron TSW-UMB-70-BBI Manual de usuario

Crestron

Crestron MMK-V12 Manual de usuario

Crestron

Crestron BB-1000 Manual de usuario

Crestron

Crestron CAEN-UMP1X2-DIN-PWS Manual de usuario

Crestron

Crestron MMK-1000L Manual de usuario

Crestron

Crestron SPKA-FMKT-IC6 Manual de usuario

Crestron

Crestron C2N-IIF-SPMK Manual de usuario

Crestron

Crestron TMK-12L Manual de usuario

Crestron

Crestron CT-1000 Manual de usuario

Crestron

Crestron MMK-3000L Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario