Code Alarm CA 4055 Manual de usuario

PROFESSIONAL

SERIES

Owner’s Guide

For Model:

CA 4055

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the conguration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.

Vehicle Remote Start System

2ca4055 Owners

Table of Contents

Using Your Remote Starter..................................................................... 3

Remote Starting Your Vehicle............................................................ 3

Remote Start Shutdown .................................................................... 3

Unlocking the Vehicle (optional) ........................................................ 3

Entering Your Vehicle while it is Running via Remote Start .............. 3

Programmed Transmitter Notication (PTN) ..................................... 4

Valet Mode ........................................................................................ 4

Preheating or Precooling the Vehicle’s Interior ................................. 4

Using the “Quick-Stop” Feature......................................................... 4

Operating the 2 / 3 Hour Start Up Timer Mode.................................. 5

Remote Start Safety Features........................................................... 6

Status LED, Light Flashes and Horn Chirp Indications....................... 6

Remote Control Buttons & Functions ................................................... 7

Replacing Remote Control Batteries..................................................... 7

Warranty Information ............................................................................ 11

Using Your Remote Starter

Remote Starting Your Vehicle

To activate the remote start function, press and release the button 2 times within 2

seconds. The system will sound, the parking lights will ash 1 time and the system

will check the vehicle to ensure it is safe to start. If all safety parameters are correct,

the vehicle will start. The vehicle’s parking lights will turn on (or ash depending on

system settings) as a visual indication that the vehicle has started and is running.

If your vehicle stalls or does not start, the system will pause 5 seconds, then try

3 more times to start the vehicle (a total of 4 attempts). The system will pause 5

seconds between each start attempt.

Note: This is the default conguration for remote start activation, the system can also

be congured in option programming to remote start with a single press of the

button.

Remote Start Shutdown

Press and hold the button for 3 seconds to turn the vehicle off. Pressing the brake

pedal will also shutdown the remote start.

Note: The system can also be congured in option programming as a single or double

press and release of the button.

Entering the Vehicle while it is Running via Remote Vehicle Start

1. Unlock the vehicle’s doors.

2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!

3. Insert the key into the ignition switch and turn to the ON or RUN

position.

4. Press the brake pedal. The remote start system will disengage and

the vehicle will operate normally.

Unlocking the Vehicle (optional)

To unlock the vehicle’s doors press and release the button 2 times within 2

seconds anytime the vehicle is remote started.

Note: The system can also be congured in option programming as a single press

and release or a press and hold (for 3 seconds) of the button.

Note: Additional parts and/or labor may be necessary, see your installing dealer for

details.

4ca4055 Owners

Preheating or Precooling the Vehicle’s interior

Before exiting the vehicle, set the temperature controls to the desired setting and

operation. After the system starts the vehicle, the heater or air conditioner will

activate and heat or cool the vehicle’s interior to your setting.

Using the “Quick-stop” Feature

If you want to make a short stop and keep your vehicle running (to keep the interior

warm or cool), the quick-stop feature allows you to do this while keeping your vehicle

secure and your keys with you.

To engage Quick Stop:

1. Stop the vehicle and place the transmission in PARK.

2. With your foot off the brake pedal, press and release the button 2

times within 2 seconds. The LED will ash 3 times to conrm quick

stop is entered.

3. Remove the keys from the ignition and exit the vehicle. Press the

button to lock the vehicle’s doors if desired.

Note: Do not leave children or animals unattended in the vehicle when using the

quick-stop feature.

Programmed Transmitter Notication - PTN

As a security precaution each time the vehicle’s ignition is turn on the status LED

light with ash the number of transmitters programmed into the system. This helps

to identify unauthorized transmitters from accessing your vehicle. If you believe an

unauthorized transmitter has been programmed to your system, contact your installing

dealer for assistance.

Valet Mode

When valet mode is activated the status LED will light solid and all remote start

functions will be disabled. To enter or exit valet mode simply follow the steps

outlined below:

1. Turn the vehicle’s ignition ON.

2. Push and hold the programming/valet button.

3. The LED will turn on solid when valet mode is active

4. Release the programming/valet button.

Operating the 2 / 3 Hour Start Up Timer Mode

The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period.

This feature is especially useful in cold climates where the only means to keep the

engine and engine uids warm is to periodically start the engine. The default setting is

3 hour, selection between 2 or 3 hour is made in option programming.

WARNING!

Be certain that the vehicle is outdoors before using this or any remote starting

device. A running engine produces dangerous carbon monoxide fumes which can be

harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if it is

garaged.

To begin the 2 / 3 hour start up timer mode:

1. Turn the vehicle’s ignition ON then OFF.

2. Press and hold the valet button.

3. Press the button 4 times, the system will;

a. When set for 3 Hour (default) - chirp 2 times and ash the

parking lights 4 times.

b. When set for 2 Hour - chirp 1 time and ash the parking

lights 2 times.

4. Release the valet button.

To exit the 2 / 3 hour start up timer mode:

1. Turn the vehicle’s Ignition ON.

1. Activate the remote vehicle start feature using the remote

control.

6ca4055 Owners

Status LED, Light Flashes, and Horn Chirp Indications

Status LED Flash Indications

LED Flashes Function

1 - 4 ashes / Ignition On PTN

ON (Solid) Valet Mode

Siren/Horn Chirp Indications

Chirps Function

1 Remote Start Activation

Parking Light Flash Indications

Flashes Function

ON (Solid or Slow Flash) Remote Started

Remote Start Shutdown Diagnostics

Parking Light Flashes Shutdown Zone

3 Flashes Hood / Brake Input

4 Flashes Remote Start Valet Mode

7 Flashes Tach not learned / Crank Average not

learned

Remote Start Safety Features

For safety and security reasons, the system will shutdown or prevent the remote

vehicle starter from activating if any of the following occur:

1. The vehicle’s hood is open.

2. The brake pedal is pressed prior to turning the ignition key to the ON

position.

3. The engine is over-revved (tach checking only).

4. Valet Mode is active.

Remote Control Buttons & Functions

1 Button Transm itterStart Operation Method

Remote Start XPress and Release 2 times

Unlock XPress and Release 2 times - During

remote start only

Remote Start Shutdown XPress and Hold (3 Sec)

2 / 3 Hour StartX

Ignition On/OFF, Press and Hold Valet

Button, press and release Start 4 times

Replacing Remote Control Batteries

1 Way Remote Control, CAT1B:

The battery (model CR2032) inside each remote control should last approximately 1

year under normal use. When the battery becomes weak you will notice the remote

control range (the distance from the vehicle the remote control will work) deteriorate

and the small LED on the remote control will dim. To replace the battery in the remote

control:

1. Unsnap and disassemble the halves of the remote control.

2. Remove the old battery, observing the +/- symbols on the battery

and replace with new CR2032 battery.

3. Reassemble the halves of the remote control.

4. Test operation of the remote control.

8ca4055 Owners

10 ca4055 Owners

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Arranque remoto de Code Alarm

Code Alarm

Code Alarm ca4B5 Manual de usuario

Code Alarm

Code Alarm PROFESSIONAL SERIES Manual de usuario

Code Alarm

Code Alarm professional series PROCOMP Manual de usuario

Code Alarm

Code Alarm CA 5150 Manual de usuario

Code Alarm

Code Alarm Elite ca6555E Manual de usuario

Code Alarm

Code Alarm CA 5053 Manual de usuario

Code Alarm

Code Alarm ca6154 Professional Series Manual de usuario

Code Alarm

Code Alarm Professional Series CA 4050 Manual de usuario

Code Alarm

Code Alarm CSI-100 Manual de usuario

Code Alarm

Code Alarm CA2LCD5 Manual de usuario

Code Alarm

Code Alarm ca4053 Manual de usuario

Code Alarm

Code Alarm F30 Manual de usuario

Code Alarm

Code Alarm PC 4300 Manual de usuario

Code Alarm

Code Alarm Professional Series CA 5050 Manual de usuario

Code Alarm

Code Alarm SRT 6700 Manual de usuario

Code Alarm

Code Alarm GUARDIAN CPL 100 Manual de usuario

Code Alarm

Code Alarm CA-520A Manual de usuario

Code Alarm

Code Alarm CA 5055 Manual de usuario

Code Alarm

Code Alarm CA 410A Manual de usuario

Code Alarm

Code Alarm Professional ca5054 Manual de usuario

Code Alarm

Code Alarm CA-550 Manual de usuario

Code Alarm

Code Alarm PC 7600 Manual de usuario

Code Alarm

Code Alarm CA 6150 Manual de usuario

Code Alarm

Code Alarm CA-535 Manual de usuario

Manuales populares de Arranque remoto de otras marcas

AstroStart

AstroStart 803U Manual de usuario

Durite

Durite 0-649-20 Manual

EINHELL

EINHELL BT-PS 1000 Manual

Linear

Linear ACCESS AK-21 Especificaciones técnicas

Soundstream

Soundstream TARANTULA RS.2 Manual de usuario

Jaycar Electronics

Jaycar Electronics MB3752 Manual de usuario

Ultra Start

Ultra Start 72 Series Manual de usuario

ADS

ADS FLASHLOGIC FLRSVW1 Manual de usuario

Selecta

Selecta JS012 Manual de usuario

Black Widow Security

Black Widow Security BW RAS 400 Manual de usuario

Vector

Vector Power City DK080706 Suplemento

Ozito

Ozito OJS-800 Manual de usuario

Profi-Partner

Profi-Partner 46387 Manual de usuario

EZ STARTER

EZ STARTER EZ-45 Manual de usuario

Viper

Viper 4204 Manual de usuario

Essex Electronics

Essex Electronics KE-1701 Manual de usuario

EINHELL

EINHELL EGS 3600 Manual

Rooboost

Rooboost RB-1750WP Manual de usuario