Code Alarm SRT 1600 Manual de usuario

IMPORTANT NOTE: TheoperationoftheSecurityandConvenienceSystem asdescribedinthis

manualisapplicabletomostvehicles.However, due to theconfigurationof some vehicles, some

functionsAND/ORSAFETYPRECAUTIONS may not apply.Pleaseseeyour installingdealer for more

information.

Owner's Manual

SRT 1600

Remote Vehicle Control System

Deluxe Vehicle Security and Keyless

Entry System with 900Mhz Two Way

Confirming LCD Remote Control

Table of Contents

Using Your Remote Control ................................................................................................................ 3

Armingthe security system

Pre-armmode

Disarmingthe security system

Disabling/Enabling confirmation chirps

Attemptedintrusion identification

Twostage door unlock*

Activatingthe trunk releasefeature*

Using Your Remote Control, continued ....................................................................................... 4

Turningonthe vehicle’s headlights*

Activatingoptional AUX 1*

Activatingoptional AUX 2*

Activatingoptional AUX 3*

Activatingoptional AUX 4*

Using the progressive car finder feature

Usingthepersonal protection alarm

Using Valet Mode

Additional LCD Remote Control Features ................................................................................... 5

Additional LCD Remote Control Features, Continued .............................................................. 6

LCDremote control options menu

Quick Reference Button Operation Guide.................................................................................... 7

Replacingremotecontrolbatteries

LCD Remote Control Icons and their Indications ..................................................................... 8

Emergency Override Procedure ..................................................................................................... 9

* Mayrequire additional installation labor, components and installation cost

Using Your Remote Control

Arming the Security System

Toarm the system, exit the vehicle, close alldoors,thenpress the LOCK button on the remote control. Thesystem

willsound 2 times and the parking lights will flash2 times, indicating the system is armed, has lockedthe doors (if

equippedand connected) and activated the starter disable feature. The status indicator (blue warning light on the

dash)will blink steadily,once per second. Toarm the system silently,press and hold the LOCK button for 1second.

Theparking lights will flash 2 times, indicating the systemis armed, has locked the doors (if equipped and

connected)andactivatedthestarterdisablefeature.Thestatusindicator(blue warning light on the dash) will blink

steadily, onceper second.

Pre-arm Mode

Ifthesystem sounds 1 time and the parking lights flash only1time, this indicates that the vehicle’s interior light is

onor an entrance is left open. Check to see thatalldoorshoodandtrunkareclosedproperly. Once all entrances

aresecured (and the interior light is off), thissystem will sound/flash again. The system is now fullyarmed. (If the

entranceisnotsecuredwithin4 minutes, the system will arm and ignore the unsecured entrance until it is closed.)

Disarming the Security System

To disarm the system press the UNLOCK button. The system will sound and the parking lightswill flash once, and

thedoorswillunlock(ifequippedandconnected). To disarm the system silently, press and hold the UNLOCK

buttonfor1 second. The parking lights will flash, indicating the system is disarmed andhasunlocked the doors (if

equippedand connected).

Disabling/Enabling Confirmation Chirps

1. Turn the ignition key ON then OFF.

2. Within10 seconds pushandrelease the valet/override button3times.

3. Thesystemwillsound2timestodisable confirmation chirps or 1 time to enable confirmation chirps.

Attempted Intrusion Identification

Thissystem will inform you if anintrusionattempthas occurred while you were away fromthevehicle. Ifan intrusion

attemptoccurred, the system will sound 4 times and the parking lights will flash 3 times when disarming the system.

Enterthe vehicle anobservethe dash mounted statusLEDto Identify whichzonewas triggered.

1. ShockSensor-1 flash, pause 1 flash, etc.

2. HoodorTrunk Pin switch - 2 flashes, pause 2 flashes, etc.

3. DoorEntry - 3 flashes, pause 3 flashes, etc.

Theintrusion warning indicators are stored in the system’s memory and will be erased when the ignition key is

turnedon.

Two Stage Door Unlock (Optional)

Ifthis feature is enabled on your system, pressing theUNLOCKbuttonone time on the remote control will unlock

onlythe driver’s door. Press UNLOCK again to unlock theremainingdoors.

Activating the Trunk Release Feature (Optional)

Ifthisfeatureisenabledonyoursystem,pressingandholdingtheTRUNKbutton on the remote control for 2

secondswill open the vehicle’s trunk or hatch.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second, ‘press and hold’ refers to pressing for

morethan2seconds.

Using Your Remote Control, continued

Turning on the Vehicle’s Headlights (Optional)

Ifthis feature is enabled on your system, pressing and holding the LOCK button on the remote control for 3

secondswillturnonthevehicle’sheadlightsfor30seconds.

Activating Optional AUX 1 (Optional)

Ifthis feature is enabledonyour system, press and releasetheOPT button on the remotecontrolto activate an

optionalfeature. This feature can be programmed for a widerangeoffunctions like power window or sunroof

automation,please consult yourinstallingdealer to determinefunctionalityof your system.

Activating Optional AUX 2 (Optional)

Ifthis feature is enabled on your system, pressing and holding the KEY buttonontheremotecontrolfor 2 seconds

willactivate an optional feature. Thisfeaturecanbe programmed for a wide rangeoffunctions like power window

orsunroof automation, please consultyourinstalling dealer to determinefunctionalityof your system.

Activating Optional AUX 3 (Optional)

Ifthis feature is enabled onyoursystem, pressing and holding theLOCKbuttonand the Trunk button ontheremote

controlsimultaneously for 2 seconds will activate anoptionalfeature.This feature can be programmed for awide

rangeof functions like power windoworsunroofautomation, please consult your installing dealertodetermine

functionalityofyour system.

Activating Optional AUX 4 (Optional)

Ifthis feature is enabled on your system, pressing and holding the UNLOCK button and the TRUNK button onthe

remotecontrol simultaneously for 2 seconds will activate an optionalfeature.Thisfeaturecan be programmed for a

widerange of functions like power windoworsunroofautomation, please consult your installing dealertodetermine

functionalityofyour system.

Using the Progressive Car Finder Feature

Pressthe LOCK button and the UNLOCK button ontheremotecontrol to locate your vehicle. The system will

sound5 times at low volumeincreasinginvolume each of 3 timesthebuttonis pressed.

Using the Personal Protection Alarm (Panic)

Pressand hold the LOCKbuttonandthe UNLOCK button on theremotecontrol for 2 seconds toactivatethe

personalprotection alarm. The system will sound for 30 seconds. Pressing any button on the remote control will

turnthe personal protection alarm off.

Using Valet Mode

To engage valet mode:

1. TurntheignitionkeytotheONposition.

2. Pressandhold the emergencyoverride button.

3. ThebluedashboardmountedLEDwill light solid indicating that the system is in valet mode.

Whenvalet mode is activated the dash mounted status LED will light solid, and all security functionswillbe

disabled.

To disengage valet mode:

1. TurntheignitionkeytotheONposition.

2. Pressandrelease the emergency overridebutton.

3. Thebluedashboard mounted LEDwillturn off indicatingthat the systemhasexited valet mode.

Additional LCD Remote Control Functions

LCD Remote Control Display Illumination

Pressandreleasethe“F”buttonontheLCDremotecontrol one time. The display will illuminate for 10 seconds.

LCD Remote Control Vibrate or Tones

Pressand release the “F” button and the UNLOCK button on the LCD remotecontrolsimultaneouslyonetimeto

togglebetween beep tones and vibrate mode. TheLCDremotecontrol will either beep or vibratetoindicatewhich

modeis selected.

Page Call Out

Fromwithin the vehicle, press and hold the emergency override button for4seconds,theLCD remote control will

emita beep tone to indicate thatsomeoneiscalling you to the vehicle.

Out of Range

If the LCD remote control is within operating range of the vehicle the antenna or IN-RANGE INDICATOR icon will

bedisplayed after any button is pressed. If this icon disappears after a button is pressed the vehicle is out of range

ofthe remote control.

Countdown Timer

TheLCD remote control is equippedwitha countdown timer for situations whereanalert tone may be neededto

remindyou of something important. Thecountdowntimer allows you tosetthe timer up to19hours and 59 minutes.

Refer to page 10 for programming.

Parking Meter Timer

TheLCD remote control is equipped with a parking meter timer that allows you to set a countdown timer for 10, 20,

30,60,90or120minutes. TheLCDremotecontrolwillemitabeeptonewhenthetimerexpires. Press”F”and

TRUNKsimultaneouslytoselectdesiredtime.

Alarm Clock

TheLCDremotecontrolisequippedwithabuilt in alarm clock that can be set to beep at a certaintime each day.

Thealarmclock must be set, and the feature turned on. Refer topage10for programming time. Press ”F” and

KEYsimultaneously to turn ON and OFF if thedesiredtimehas already been set.

Bypassing The Shock Sensor

Thereare3 additional modes of operation in which your system will react to the shock sensor, FULL TRIGGER

ONLY, ALLOFF, or CITY MODE.

PressLOCK once to arm the system.

PressingLOCK again within 2 seconds will setthe system to FULLTRIGGER ONLYin whichthe system will

ignore the light touch setting.

PressingLOCKagain within 2 seconds will set the system toALLOFF. In this mode the system will not reacttothe

shocksensor and the 2-way LCDremotewilldisplay the shock sensor icon.

PressingLOCK again within 2 seconds will set the system toCITYMODE. In this mode the light touch horn output

isextendedtoafull10secondsandfulltriggerhornoutputisshortened to 15 seconds, no icon is displayed.

NOTE:The system will only change the shock sensorsettingforone arm cycle and will be defaulted back tonormal

operationthenexttime thesystem isarmed.

Additional LCD Remote Control Functions, cont.

Check Vehicle Status

PresstheLOCK,TRUNKand KEY buttons simultaneously for 1 second. The LCD remote control will display the

system’scurrent status.

Check Temperature

PresstheTRUNKandKEYbuttonssimultaneouslyfor 1 second. The LCD remote control will display the

vehicle’sinteriortemperature.

Battery Save Mode

Pressthe LOCK and “F” buttonssimultaneouslywhenthe system is disarmed. Note thatinthis mode the remote

willnot send or receivevehiclestatusunless you press a buttononthe remote.

Temperature Display

Pressand release the TRUNK,KEYand “F” buttons simultaneously tochangethe temperature display between

Fahrenheit or Celsius.

LCD Remote Control Options Menu

Accessing the Options Menu

1.Press and hold the “F” button for 5 seconds.

2. Press the “F” button to select the setting to change.

3. Use the TRUNK or OPT button to change the digits.

4.Press “F” to keepsettingandadvance to the next item.

5.Pressandhold“F”for5secondstoexitoptionsmenu.

Selectable Features in the Options Menu

1 Time Set - Hours

Time Set - Minutes

2 Alarm Clock - Hours

AlarmClock - Minutes

3 AlarmClock Melody

4 Alarm Clock - ON / OFF

5 CountdownTimer- Hours

CountdownTimer - Minutes

6 CountdownTimer/Remote StartShutdown Melody

7 Countdown Timer - ON / OFF

8 RemoteStart Melody

Quick Reference Button Operation Guide.

Operation Function Lock Unlock Trunk KEY

OPT F Operation Method

Lock X Press and Release

Unlock X Press and Release

Headlight X Press and Hold for 3 seconds

Trunk X Press and Hold for 2 seconds

Car Finder X X Press and Release

Panic X X Press and Hold for 2 seconds

Remote Start X Press two times in 2 seconds

Temp Start X X Press and Release

Daily Start X X Press and Release

AUX1 X Press and Release

AUX2 X Press and Hold for 2 seconds

AUX3 X X Press and Hold for 2 seconds

AUX4 X X Press and Hold for 2 seconds

Check Status X X X Press both together for 1 second

Check Temp X X Press both together for 1 second

Battery Saver X X Press and Release, When System is Disarmed

Vibrate X X Press and Release

2/4 hour start X Press 4 times after remote start shut down

Shock Bypass X Press and release 2, 3, or 4 times

Parking Meter Timer X X Press and release 1, 2, 3, 4, 5 or 6 times

Alarm clock X X Press and Release

Fahrenheit / Celsius X X X Press and Release

Replacing Remote Control Batteries

2-way LCD Remote Control:

The AAA alkalinebatteryinside the 2-way LCDremotecontrolshould last approximately 1yearunder normal use.

Whenthe batterybecomesweak you willnoticethe remote controlrange (the distancefromthe vehicle theremote

controlwillwork)deteriorateandtheBATTERYiconon the LCD remote control will display. Toreplace the remote

controlbattery:

1. Liftandslide the battery cover off oftheremote control.

2. RemovetheoldAAAbattery, observing the+/-symbols on thebattery, andreplacewith anew

AAAbattery.

3. Gentlyslidethe battery cover onto the backofthe remote control until itlocksintoplace.

4. Test operationofthe remote control.

1-Way 5 Button Remote Control:

Thetwo3 volt lithium batteries (model CR2032 or Code Alarm part # 6BA) insideeachremotecontrol should

lastapproximately 1yearunder normaluse. Whenthe batteries becomeweak you willnoticethe remotecontrol

range(the distance from the vehicle the remote control will work) deteriorate and the small LEDontheremote

controlwill dim. To replace the remote control batteries:

1. Usingasmall(#1)philips screwdriver, remove the 2 screws on the back of the remote control.

2. Gentlyunsnapthe halvesofthe remotecontrol apart.

3. Slidethelithiumbatteriesoutofthecircuitboard,observingthe+/- symbols on the batteries

andreplace with new lithium 3 volt batteries (model CR2032 or Code Alarm part # 6BA)

4. Gentlysnapthehalves of the remote control back together and reinstall thephilipsscrews

onthe backofthe remote control.

5. Test operationofthe remote control.

LCD Screen Icons and their Indications

CALL

NO START

LOCKED/ARMED

UNLOCKED/DISARMED

P. LIGHT FLASH

VALET MODE

TRANSMITTING

HOOD

DOOR TRIGGER

TRUNK

SHOCK TRIGGER

IGNITION TRIGGER

ENGINE RUNNING

COUNT DOWN

TIMER MODE

BATTERY INDICATOR

BATTERY SAVE MODE

PAGE FROM VEHICLE

VIBRATE/SILENT MODE

REMOTE START INHIBIT

SILENT ARM/DISARM

DAILY START

TIMER MODE

ALARM CLOCK MODE

TEMPERATURE

START MODE

CLOCK / TIMER / TEMP. DISPLAY

IN-RANGE

INDICATOR

Emergency Override Procedure

Ifyourtransmitter is lost or disabled, it will be necessary use the emergency override button to turn the security

systemoff. There are two types of emergencyoverrideprocedures. Checkwith your installing dealer to findout

whathasbeen activatedonyoursystem.

StandardEmergencyOverrideProcedure

1. Enterthevehicle(thesecuritysystemwill trigger).

2. TurntheignitionkeytotheONposition.

3. Pressandreleasetheemergencyoverridebutton(Thesecuritysystemwillturnoff).

Note:Iftheautomaticarmingfeatureisenabledonyoursystem. Thesecuritysystemwillre-armthenexttimethe

ignitionkeyisturnedoffandthevehicle’s doorsareclosed.

Coded Override Procedure

Thesystem has an optional override mode that allows you to programa2-digitpersonalcode using the

emergencyoverride button offeringahigherlevelofsecurity. This featuremustbeenabledbyyour installing

dealer,the default override code is 11.

1. Enterthe vehicle (the security system will trigger).

2. Turnthe ignition switch to the ON position.

3. Within5secondspress the emergency override button the numberoftimescorresponding to

the first digit of your personal code (Default digit is 1).

4. Within 5 seconds turn the ignition key OFF, then ON.

5. Within5secondspress the emergency override button the numberoftimescorresponding to

the second digit of your personal code (Default digit is 1).

6. Within 5 seconds turn the ignition key OFF, then ON.

7. Ifenteredcorrectlythe security system will turn off.

8. TurntheignitionkeytotheOFFposition.

ProgrammingYour Personal OverrideCode

1. Makesurethesecurity system is disarmed.

2. TurntheignitionkeytotheONposition.

3. Within10secondspress and release the override button 3 times.

4. Within10seconds turn the ignition key OFF then ON 3 times (The horn will honk andthe lights

will flash 1 time).

5. Within10seconds press and release theoverridebutton the number oftimes

correspondingwith the first digit of yourpersonal code (1-9).

6. Within10secondsturntheignition key OFF then ON.

7. Within10 seconds press andreleasethe override button thenumberof times corresponding

withtheseconddigitofyoupersonalcode(1-9).

8. Within 5 seconds turn the ignition key OFF.

9. Youwill notice the LED flashanumberof times corresponding with the codeyouentered.

Note:If 15 seconds of inactivity passes the system will abort programming.

Note: Do not lose your “Personal Override Code”. Reprogramming a new code without the original code

can only be performed by an authorized dealer.

Tabla de contenidos

Otros manuales de Alarma de coche de Code Alarm

Code Alarm

Code Alarm ca 1051 Manual de usuario

Code Alarm

Code Alarm CA 170 Manual de usuario

Code Alarm

Code Alarm CA- 550 Manual de usuario

Code Alarm

Code Alarm Professional Series CA 1050 Manual de usuario

Code Alarm

Code Alarm 2000 Manual de usuario

Code Alarm

Code Alarm CATX2LED Instrucciones de funcionamiento

Code Alarm

Code Alarm CA 180 Manual de usuario

Code Alarm

Code Alarm 2000 Manual de usuario

Code Alarm

Code Alarm CA-500 Manual de usuario

Code Alarm

Code Alarm CSI-300 Manual de usuario

Code Alarm

Code Alarm CA-160 Manual de usuario

Code Alarm

Code Alarm Professional caSECRS Manual de usuario

Code Alarm

Code Alarm F20 Manual de usuario

Code Alarm

Code Alarm CA 420 Manual de usuario

Code Alarm

Code Alarm CATX610 Instrucciones de funcionamiento

Code Alarm

Code Alarm Elite CA6155e Manual de usuario

Code Alarm

Code Alarm CA 521 Manual de usuario

Code Alarm

Code Alarm ca 1552 Professional Series Manual de usuario

Code Alarm

Code Alarm Car Alarm Manual de usuario

Code Alarm

Code Alarm Car Alarm CA-310 Manual de usuario

Code Alarm

Code Alarm CA611 Manual de usuario

Code Alarm

Code Alarm CA-125 Manual de usuario

Code Alarm

Code Alarm PRO 3500 Especificaciones

Code Alarm

Code Alarm ELITE Series Manual de usuario

Manuales populares de Alarma de coche de otras marcas

Clifford

Clifford 3606X Manual de usuario

Ultra Start

Ultra Start 2500M SERIES Manual de usuario

Ultra Start

Ultra Start 650 Series Manual de usuario

Audiovox

Audiovox Prestige Platinum+ APS-511C Manual de usuario

Sparkrite

Sparkrite SRA8 Manual de usuario

Viper

Viper 4708V Manual de usuario

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manual

Falcon

Falcon Predator XL3 Guía del usuario

Audiovox

Audiovox Auto Security XR91 Instrucciones de funcionamiento

Clifford

Clifford Sabre II Manual de usuario

CrimeStopper

CrimeStopper CS-8717 Guía de inicio rápido

Ultra Start

Ultra Start 450 SERIES Manual de usuario

Scytek electronic

Scytek electronic Vectra X3 Manual de usuario

Excalibur

Excalibur AL-1860-EDPB Manual de usuario

Clifford

Clifford CYBER 2 Manual de usuario

Gemini

Gemini 7057 Manual de usuario

FlashLogic

FlashLogic FLRSBA PRESTIGE Manual de usuario

Magicar

Magicar FAI-440 Manual de usuario