Clear-Com LQ-2W2 Manual de usuario

LQ™ Quick Start Guide

The following Quick Start Guide provides basic installation and configuration instructions for your LQ system. LQ is a

new IP interface for Clear-Com audio products. It offers Internet, LAN and WAN connectivity for multi-linking audio.

•LQ-2W2 provides connection for two 2-wire analog partyline channels (XLR connectors)

•LQ-4W2 provides connection for two 4-wire channels (RJ45 etherCON connectors)

1.1 Powering and connecting the LQ units

1) Connect the LQ unit to a network using standard Ethernet cable

and power it on (use either the DC power supply cable provided or

PoE).

2) Connect the audio cables.

3) Open a Web-browser on a device connected to the same network

as the LQ device.

4) Input the IP address shown on the LQ device’s display into the

address field of the browser.

5) Enter the default login credentials for the Core Configuration

Manager: Username – admin, Password – admin.

Core Configuration Manager (CCM)

The CCM has three main pages:

•Home - Settings for the host device (the device whose IP address

the browser is connected to).

•Devices - Settings for all devices in a Link-Group.

•Audio Assignments – Configuration of audio routes between LQ

devices.

Note: If your network does not serve

DHCP you will need to assign a static IP

address to the LQ device:

1) Connect a standard (straight)

Ethernet cable from a computer

to either LAN port on the device.

2) Ensure the computer is in DHCP

mode.

3) Open a web browser and input

the device’s IP address in the

address field.

4) Navigate to the device’s network

screen within the home page

and allocate a static IP address.

2-wire 2-wire

4-wire

1 399G117 Rev: B 11/12/14

1.2 Linking the devices

Each device’s role is set as Link-Master by default.

1) Select one device in the group to be designated as the Link-Master, connect it to the network and

power it on.

2) Connect another LQ device to the same network and power it on.

3) Enter the IP address shown on the display of the Link-Member device into the address field of your

Web-browser to connect to that device’s Core Configuration Manager.

1.3 Audio port settings

From the Core Configuration Manager (CCM) go to Devices >2-Wire/4-Wire (depending on device type).

The LQ devices arrive with the following default settings:

Power

Disabled

Mode

Clear-Com

Input/Output gain

0dB

Termination

Disabled

Network Quality

High

Input/Output gain

0dB

Network Quality

High

Pin Polarity To

Matrix

Note: When connecting any 2-

wire device to an LQ-2W2 port,

please auto-null each port.

1.4 Connecting and configuring audio channels

Once an LQ device is connected to a Link-Master, click on the Audio Assignments button within the

navigation bar to configure channel connections.

See the LQ System User Guide on the Clear-Com website for more information.

Navigate to Home >

Linking.

Click Change Role to

Link-Member.

Enter IP address of Link-Master. Click on

blue check mark or press <ENTER> key

to submit.

Select an available

device ID (highlighted in

blue).

8) Click Apply changes.

9) Repeat linking process for each device.

2 399G117 Rev: B 11/12/14

Otros manuales para LQ-2W2

Este manual sirve para los siguientes modelos

Otros manuales de Sistema de intercomunicación de Clear-Com

Clear-Com

Clear-Com HME DX210 Manual de usuario

Clear-Com

Clear-Com MS-222 Manual de usuario

Clear-Com

Clear-Com KB-702GM Manual de usuario

Clear-Com

Clear-Com KB-702 Manual de usuario

Clear-Com

Clear-Com WBS Manual de usuario

Clear-Com

Clear-Com WBS-680 Manual de usuario

Clear-Com

Clear-Com TEMPEST 2400 Manual de usuario

Clear-Com

Clear-Com SB-440 Manual de usuario

Clear-Com

Clear-Com HME DX410 Manual de usuario

Clear-Com

Clear-Com RS-601 Manual de usuario

Clear-Com

Clear-Com DX410 Manual de usuario

Clear-Com

Clear-Com Tempest 900 Manual de usuario

Clear-Com

Clear-Com Tempest2400 Manual de usuario

Clear-Com

Clear-Com HelixNet Partyline Manual de usuario

Clear-Com

Clear-Com RM-220 Guía de solución de problemas

Clear-Com

Clear-Com FreeSpeak II Integra Manual de usuario

Clear-Com

Clear-Com FreeSpeak II FSII-TCVR-24 Manual de usuario

Clear-Com

Clear-Com MS-200C Guía de solución de problemas

Clear-Com

Clear-Com FreeSpeak II Manual de usuario

Clear-Com

Clear-Com KB-111A Guía de solución de problemas

Clear-Com

Clear-Com Tempest 2400 MasterBelt Manual de usuario

Clear-Com

Clear-Com Eclipse HX-PiCo Manual de usuario

Clear-Com

Clear-Com Eclipse Median Manual de usuario

Clear-Com

Clear-Com Eclipse HX-Median Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario