Clear-Com DX410 Manual de usuario

Quick Reference Guide

DX410

1. Channel A (Intercom 1) button - Includes 2-wire

and 4-wire connections

2. ISO (Isolate) button - To All Wireless Headsets

and Belt Packs, Base, ISO Relay and AUX OUT

(if activated)

3. Increase Volume button (˄)

4. Decrease Volume button (˅)

5. Channel B (Intercom 2) button - Includes 2-wire

and 4-wire connections

6. Power/Mode lights

7. Microphone

8. Power button (On/Off)

9. Battery

10. Battery-release latch

1. Battery

2. Increase Volume button (▲)

3. Decrease Volume button (▼)

4. PWR (Power) button

5. Headset cable connector

6. Battery-release latch

7. Power/Mode lights

8. Channel A (Intercom 1) button - Includes 2-wire

and 4-wire connections

9. ISO (Isolate) button - To All Wireless Headsets

and Belt Packs, Base, ISO Relay and AUX OUT

(if activated)

10. Channel B (Intercom 2) button - Includes 2-wire

and 4-wire connections

1 2

4 7

All-In-One Headset Belt Pack

7 78 9 10

21 64 3 5

Settings & Adjustments

All-In-One Headset Lights Off:

• Make certain the headset power is Off.

• Press and hold the B button while pressing and releasing the Power button.

Note: "Lights Off" is temporary. Lights return when power is cycled.

Belt Pack Sidetone Adjustment:

• Press and hold the A button while you repeatedly press up (▲) to increase or press down (▼) to decrease audio levels.

For technical support

In The Americas and Asia – Tel: +1.510.337.6600 or 1.800.462.4357 Menu option 1 • Hours: 8:00am-5:00pm Pacic Time • Email: [email protected]

In Europe, Middle East and Africa – Tel: +44.1223.815000 • Hours: 8:00am-5:00pm GMT • Email: [email protected]

Part Number: 399G164 Rev A

Date: 12/4/15

Clear-Com, the Clear-Com logo and Clear-Com Concert are trademarks or registered trademarks of HM Electronics, Inc.

Quick Reference Guide

DX410

Power Switch

STATUS AUTO NULLREG

COMMUNICATOR®

Registration

Audio Channel and

Auto-Null Controls

Local Headset

Controls

• Make certain the Belt Pack or Headset is turned Off.

• Press REG button on base station.

– STATUS display on the base station shows “o” for registration mode.

• On the Belt Pack and Headset, press and hold ISO while pressing POWER and then release all buttons.

– The power lights blink red, then green and then turn off. One power light remains green.

– The registration number will appear on the base station STATUS display.

AUTO NULL Adjustment (only if using 2-wire interface)

If echo is heard in wireless Belt Packs or All-In-One Headsets on A or B:

• Use pointed object (e.g. pen) to press and hold the A or B AUTO NULL button for 2 seconds.

CAUTION: Before pressing an AUTO NULL button, be certain there are no open microphones on the wired

system. Notify wired system users that a loud noise may occur in their headsets during the auto null adjustment.

The system may be out of operation for approximately 50 seconds during this adjustment.

Local Headset Communication

• SEL button selects communication with A, Bor ISO.

– A, Bor ISO lights indicate selection.

• TALK button

– Press and release quickly to “latch on” for open communication.

– Press and hold while talking for momentary communication – release when nished.

• VOLUME control adjusts the audio level in local headset ear piece.

• MIC LEVEL control adjusts the audio level going out from local headset microphone.

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Clear-Com

Clear-Com

Clear-Com Eclipse HX-Median Manual de usuario

Clear-Com

Clear-Com TEMPEST 2400 Manual de usuario

Clear-Com

Clear-Com LQ-2W2 Manual de usuario

Clear-Com

Clear-Com eclipse HX-Delta Manual de usuario

Clear-Com

Clear-Com KB-702GM Manual de usuario

Clear-Com

Clear-Com FreeSpeak II Integra Manual de usuario

Clear-Com

Clear-Com RM-220 Guía de solución de problemas

Clear-Com

Clear-Com HelixNet Partyline Manual de usuario

Clear-Com

Clear-Com WBS Manual de usuario

Clear-Com

Clear-Com FreeSpeak II Manual de usuario

Clear-Com

Clear-Com FreeSpeak II Manual de usuario

Clear-Com

Clear-Com ECLIPSE ICS 92/52 Manual de usuario

Clear-Com

Clear-Com TEMPEST 2400 Manual de usuario

Clear-Com

Clear-Com KB-111A Guía de solución de problemas

Clear-Com

Clear-Com Tempest2400 Manual de usuario

Clear-Com

Clear-Com HMS-4X Guía de inicio rápido

Clear-Com

Clear-Com RS-700 Series Manual de usuario

Clear-Com

Clear-Com LQ-2W2 Manual de usuario

Clear-Com

Clear-Com Tempest 900 Manual de usuario

Clear-Com

Clear-Com RS-601 Manual de usuario

Clear-Com

Clear-Com LQ series Manual de usuario

Clear-Com

Clear-Com WBS Manual de usuario

Clear-Com

Clear-Com Tempest 2400 MasterBelt Manual de usuario

Clear-Com

Clear-Com ICS-102 Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario