Clear-Com FreeSpeak II Manual de usuario

Page 1399G106 Rev C 08/07/15

A FreeSpeak II (FS II) system consists of five main elements:

•Wireless beltpacks (FSII-BP-19, FSII-BP-24).

•The Base station (FSII-BASE) that routes communication to and from the beltpacks and

other audio devices.

•Antennas (FSII-TCVR-19, FSII-TCVR-24) that provide coverage zones in which the

beltpacks operate.

•Optional antenna splitters (PD2203) that run up to 5 separate antennas.

•Suitable headsets such as the Clear-Com CC-300-X4.

Connecting the transceiver/antennas to the Base station

To connect the antennas to the Base station:

1) Clear-Com recommends using 4-pair shielded screened cable (CAT-5/5e/6) with RJ45

connectors to connect the antennas to the Base station. Up to 5 antennas can be

connected to each transceiver port using an antenna splitter, or two antennas can be

connected directly to the Base station. The Base station can power cable lengths of up to

650 ft (200m). Powering antennas or splitters individually can increase cable lengths to a

maximum of 3280 ft (1000m). See 3.2.1 Wiring the antennas and splitters in the

User Guide for more information.

2) When the transceiver/antennas are connected, turn on the Base station and wait for it to

boot.

Using the Beltpacks

The system arrives with a default audio set-up and configuration so the system can simply be

wired and powered for basic use. The default set-up has two Wireless Partylines, WPL01 and

WPL02 for beltpack channel A and B respectively. Each channel talks to:

•All the beltpacks on that channel

•The head set on the Base station.

To customize an audio channel configuration please refer to the FreeSpeak II User Guide.

IEC power

connector Transceiver/antenna ports

Wired partyline

connectors

Quick

Start

Guide

FreeSpeak II™ Stand alone

Base station system

Quick Start Guide |FreeSpeak II™ stand alone system

Page 2399G106 Rev C 08/07/15

Enabling registration of beltpacks to the Base station

1) From the Base station menu, go to MAIN MENU ->SYSTEM ->REG ->START. Enable

registration mode has a two minute inactive time-out.

2) On the beltpack to be registered, hold down the menu key for 2 seconds, then enter

SYSTEM CONNECT using the rotary controllers and the C& Dkeys.

3) Select the system to pair to. The system will be visible (V) and in pairing mode (P).

4) Enter the four digit pairing code for the system using the rotary controllers and the menu

select key (D). The default is 0000.

5) Select an available role from the list displayed on the beltpack.

The beltpack is now paired and ready for operation. To test, press and hold the channel A button

while talking. Others will hear you on channel A.

Battery

Compartment

Rotary control, audio

levels Channel A (also

menu navigation in

menu mode)

On/Off button (3 second

press and hold)

Rotary control,

audio levels

Channel B (also

menu navigation in

menu mode)

Channel A

Talk button

Channel A Call button

(also cancels menu selection

when in menu mode)

Beltpack information

screen (also displays

menu options when in

menu mode

Channel B

Talk button

Channel B Call button

(also menu select when in menu mode)

Menu button (2 second

press and hold)Reply button

Menu display screen Menu control. Push to access menu or select

menu item. Turn to scroll through menu items.

Otros manuales para FreeSpeak II

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Clear-Com

Clear-Com

Clear-Com FreeSpeak II Integra Manual de usuario

Clear-Com

Clear-Com Eclipse HX-PiCo Manual de usuario

Clear-Com

Clear-Com TEMPEST 2400 Manual de usuario

Clear-Com

Clear-Com HelixNet Partyline Manual de usuario

Clear-Com

Clear-Com FreeSpeak II Manual de usuario

Clear-Com

Clear-Com ECLIPSE-32 MATRIX Manual de usuario

Clear-Com

Clear-Com eclipse HX-Delta Manual de usuario

Clear-Com

Clear-Com ECLIPSE MATRIX Manual de usuario

Clear-Com

Clear-Com RM-220 Guía de solución de problemas

Clear-Com

Clear-Com LQ-2W2 Manual de usuario

Clear-Com

Clear-Com TEMPEST 2400 Manual de usuario

Clear-Com

Clear-Com RS-601 Manual de usuario

Clear-Com

Clear-Com Tempest2400 Manual de usuario

Clear-Com

Clear-Com HME DX210 Manual de usuario

Clear-Com

Clear-Com RS-601 Manual de usuario

Clear-Com

Clear-Com LQ series Manual de usuario

Clear-Com

Clear-Com EclipseHX Manual de instalación y operación

Clear-Com

Clear-Com Eclipse HX-Median Manual de usuario

Clear-Com

Clear-Com EclipseHX Manual de usuario

Clear-Com

Clear-Com RS-602 Manual de usuario

Clear-Com

Clear-Com HME DX410 Manual de usuario

Clear-Com

Clear-Com TEMPEST 2400 Manual de usuario

Clear-Com

Clear-Com WBS Manual de usuario

Clear-Com

Clear-Com ECLIPSE ICS 92/52 Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario