Cisco IW3702 Manual de usuario

Cisco IW3702 Access Point Getting Started Guide

Cisco IW3702 Access Point Getting Started Guide 2

Organization 2

Conventions 2

Overview 3

Installation 14

Antennas and RF Accessories 25

Configuration 48

Technical Specifications 63

Ports and Connectors 72

Related Documentation 75

Obtaining Documentation and Submitting a Service Request 75

Revised: August 18, 2017,

Cisco IW3702 Access Point Getting Started Guide

This guide documents the hardware features of the Cisco IW3702 access point. It describes the physical and performance characteristics

of each access point, and explains how to install and configure an access point.

This publication is for the network technicians who install and configure access points. You must be familiar with network structures,

terms, and concepts.

The Cisco IW3702 access point is referred to as access point in this document.

Organization

This guide includes the following sections:

DescriptionSection

Describes text conventions used in this document.Conventions, on page 2

Describes the major components and features of the access

point.

Overview, on page 3

Provides warnings, safety information, and installation

information you need to install your access point.

Installation, on page 14

Provides information about the antennas used by the access

point and the antenna configurations deployed.

Antennas and RF Accessories, on page 25

Describes the steps to configure the access point.Configuration, on page 48

Lists technical specifications for the access point.Technical Specifications, on page 63

Describes the port and connector pinouts for the access point.Ports and Connectors, on page 72

Conventions

This document uses the following conventions.

IndicationConvention

Commands and keywords and user-entered text appear in bold

font.

bold font

Document titles, new or emphasized terms, and arguments for

which you supply values are in italic font.

italic font

Elements in square brackets are optional.[ ]

IndicationConvention

Required alternative keywords are grouped in braces and

separated by vertical bars.

{x | y | z }

Optional alternative keywords are grouped in brackets and

separated by vertical bars.

[ x | y | z ]

A nonquoted set of characters. Do not use quotation marks

around the string or the string will include the quotation marks.

string

Terminal sessions and information the system displays appear

in courier font.

courier font

Nonprinting characters such as passwords are in angle brackets.< >

Default responses to system prompts are in square brackets.[ ]

An exclamation point (!) or a pound sign (#) at the beginning

of a line of code indicates a comment line.

!, #

Means reader take note . Notes contain helpful suggestions or references to material not covered in the

manual.

Note

Means reader be careful. In this situation, you might perform an action that could result in equipment

damage or loss of data.

Caution

IMPORTANT SAFETY INSTRUCTIONSMeans danger. You are in a situation that could cause

bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical

circuitry and be familiar with standard practices for preventing accidents. Use the statement number

provided at the end of each warning to locate its translation in the translated safety warnings that

accompanied this device.SAVE THESE INSTRUCTIONS

Danger

Overview

This document describes the Cisco IW3702 access point. The access point is an IEEE 802.11a/b/g/n/ac compliant, dual-band WiFi

access point with external antennas.

The access point is IP67 rated, ruggedized, and certified for on-board rail and outdoor use-cases such as train and trackside, mining,

intelligent transportation systems, and smart city applications. You can mount the access point on a DIN rail in an industrial enclosure.

Its components are designed to withstand extremes in temperature, vibration, and shock common in industrial environments.

The access point features:

•IEEE 802.11a/b/g/n compliant operation

•IEEE 802.11ac Wave 1 support

•Dual-radio design for 2.4 GHz and/or 5 GHz bands

•4x4 multiple-input multiple-output (MIMO) technology with three spatial streams

•Cisco CleanAir support for 20, 40, and 80 MHz channels

•DC input port (M12 connector)

•2 Power over Ethernet (PoE) ports with M12 X-code connectors:

◦1 x PoE-IN Gigabit Ethernet port compliant with IEEE 802.3at POE+ PD

◦1 x PoE-OUT Gigabit Ethernet port compliant with IEEE 802.3af POE PSE

•RS232 console port with cover (RJ-45 connector)

•4 antenna ports (N connector-female)

•Rugged IP67 rated housing and -40 to 167°F (-40 to 75°C) operating temperature range (ambient—without solar loading or

wind cooling)

•Compact size for space constrained environments

Access Point Models

There are two access point models, based on antenna configuration. The following table lists the available IW3702 models.

Table 1: Access Point Models

DescriptionModel

Cisco IW3700 Series Access Points with Regulatory Domain Code1

Access point with four antenna connectors: 2 on the top and

2 on the bottom.

IW3702-2E-x-K9

Access point with four antenna connectors on top side.IW3702-4E-x-K9

Cisco IW3700 Series Universal Access Points

Access point with four antenna connectors: 2 on the top and

2 on the bottom.

IW3702-2E-UXK9

Access point with four antenna connectors on top side.IW3702-4E-UXK9

1Regulatory Domains: (x=regulatory domains)Domain codes available for the IW3700 Series are x=A, B, D, E, M, R, Q, S, and Z. Other regulatory domains

are supported by the universal access points. Customers are responsible for verifying approval for use in their individual countries. To verify approval and to

identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Bottom and Top Panel Views

Figure 1: Cisco IW3702-2E-UXK9/IW3702-2E-x-K9 Bottom Panel View

Power (PWR) connector6Status LED1

Console (CON) port7Antenna port B2

Antenna port A8PoE OUT port3

Ground connection9PoE IN port4

Protective vent port / Reset

button (covered)

There are four antenna ports on the Cisco IW3702-2E-UXK9/IW3702-2E-x-K9 model: two on the top

and two on the bottom.

Note

Figure 2: Cisco IW3702-2E-UXK9/IW3702-2E-x-K9 Top Panel View

Antenna port A3Antenna port C1

Antenna port B4Antenna port D2

There are four antenna ports on the Cisco IW3702-4E-UXK9/IW3702-4E-x-K9 model: all four connectors

are on the top side.

Note

Figure 3: Cisco IW3702-4E-UXK9/IW3702-4E-x-K9 Bottom Panel View

Power (PWR) connector5Status LED1

Console (CON) port6PoE OUT port2

Ground connection7PoE IN port3

Protective vent port / Reset

button (covered)

Figure 4: Cisco IW3702-4E-UXK9/IW3702-4E-x-K9 Top Panel View

Antenna port B3Antenna port C1

Antenna port D4Antenna port A2

Bottom Panel Components

This section describes the bottom panel components.

Status LED

The Status LEDs provide information on access point status, activity, and performance. The following table describes status LED

states.

Table 2: Status LED

System StateLED ColorMessage Type

DRAM memory test in progress.Blinking pinkBoot loader status

DRAM memory test OK.

Board initialization in progress.

Initializing flash file system.

Flash memory test OK.

Initializing Ethernet.

Ethernet OK.

Starting Cisco IOS.

Initialization successful.

Normal operating condition but no

wireless client association.

GreenClient association status

Normal operating condition with at least

one wireless client association.

Blue

Software upgrade in progress.Blinking blueOperational status

Discovery/join process in progress.Cycling green-red-off

Access point location command invoked.Rapidly cycling blue-green-red

Ethernet link not operational.Blinking red

Configuration recovery in progress

(MODE button pushed for 2 to 3

seconds).

Blinking blueBoot loader warnings

Ethernet failure or image recovery

(MODE button pushed for 20 to 30

seconds).

Red

Image recovery in progress (MODE

button released).

Blinking pink

System StateLED ColorMessage Type

DRAM memory test failure.RedBoot loader errors

FLASH file system failure.Blinking red-blue

Environment variable failure.Blinking red-off

Bad MAC address.

Ethernet failure during image recovery.

Boot environment failure.

No Cisco image file.

Boot failure.

Software failure. Disconnect and

reconnect unit power.

RedCisco IOS errors

General warning. Insufficient inline

power.

Cycling blue-green-red-off

AP waiting to be primed.Cycling red-green-offAP status when provisioned by Cisco

AirProvision

AP priming via Cisco NDP in progress.Blinking white

AP upon successful connection to Cisco

AirProvision.

Blinking teal (for 15 seconds)

AP priming via Cisco AirProvision in

progress.

Blinking blue

AP primed to wrong regulatory domain.Chirping red

PWR Connectors

There are two options for powering the access point:

•DC input over the PWR connector.

•PoE inline power over the PoE IN port.

Otros manuales para IW3702

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Cisco

Cisco

Cisco Aironet 3500 Series Manual de usuario

Cisco

Cisco Small Business AP541N Manual de usuario

Cisco

Cisco Aironet 1250 Series Manual de usuario

Cisco

Cisco Aironet 1300 Series Manual de usuario

Cisco

Cisco Wap581 Manual de instrucciones

Cisco

Cisco Wap581 Manual de usuario

Cisco

Cisco WAP131 Manual de instrucciones

Cisco

Cisco AIR-BR1310G-A-K9-R - Aironet 1310 Outdoor Access... Manual de usuario

Cisco

Cisco 1830 Series Manual de usuario

Cisco

Cisco 1142 - Aironet Standalone AP Manual de usuario

Cisco

Cisco AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access... Manual

Cisco

Cisco Meraki MR36 Manual de usuario

Cisco

Cisco Meraki MR46 Manual de usuario

Cisco

Cisco Aironet 1400 Series Manual de usuario

Cisco

Cisco Meraki MR42 Manual de usuario

Cisco

Cisco AIR-AP1121G-E-K9 Manual

Cisco

Cisco Aironet 1600 Series Guía de referencia rápida

Cisco

Cisco Aironet 340 Series Manual

Cisco

Cisco Aironet 1520 Series Manual de usuario

Cisco

Cisco Meraki MR56 Manual de usuario

Cisco

Cisco AIR-LMC352 Manual de usuario

Cisco

Cisco Aironet 1140 Series Manual de usuario

Cisco

Cisco WAP571E Manual de usuario

Cisco

Cisco CISCO673-RF - 673 Router Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario