Cisco AIR-AP352E2R - Aironet 350 - Wireless Access... Manual de usuario

Cisco Systems, Inc.

Page 1 of 10

Data Sheet

Cisco Aironet 350 Series Access Points

The Cisco Aironet 350 Series Standard and Rugged Access Points

The Cisco Aironet®350 Series Access Point (AP) delivers a cost-effective, reliable, secure, and

easily managed wireless LAN (WLAN) solution for enterprise, small- and medium-sized

businesses (see Figure 1). The Cisco Aironet 350 Series leads the industry in performance,

range, reliability, security and mobility. It is easy to deploy and manage and reduces overall

cost of ownership.

The Cisco Aironet 350 Series AP supports data rates of up to 11 Mbps, is IEEE 802.11b

compliant, and offers key features that meet all enterprise requirements:

• Support for inline power over Ethernet, simplifying and reducing the total cost of

installation and ownership

• High-performance100-milliwatt(mW)radiodesignwithpowermanagementcapabilities,

delivering industry-leading throughput, range, and reliability

• Architecture that protects user investments by supporting future software features

• Available in two versions: standard and rugged. The standard AP has a plastic case,

standard operating temperature, and integrated antennas. The rugged AP has an extended

operating temperature range, external antenna connectors for auxiliary antennas, and a

metal case for durability and plenum rating.

Cisco Systems, Inc.

Page 2 of 10

The Cisco Aironet 350 Series supports the following software features:

• IEEE 802.1x-based Extensible Authentication Protocol (EAP) services that provide centralized, user-based

authentication and single-user, single-session encryption keys for hassle-free security administration and

user-based privacy

• Automatic channel selection, Cisco Discovery Protocol (CDP), Dynamic Host Conﬁguration Protocol (DHCP),

and BOOTP services to simplify installation and management of WLANs

• High-availability services, such as load balancing and hot-standby redundancy, for dependable performance

• Rich ﬁltering options on both the Ethernet and radio side to provide performance and application tuning to meet

speciﬁc business requirements

Figure 1 An AP is the center point in an all-wireless network or serves as a connection point between a

wired and wireless network. Multiple APs can be placed throughout a facility to give users with WLAN adapters

the ability to roam freely throughout an extended area while maintaining uninterrupted access to all network

resources.

A Rugged Design to Increase Deployment Options

The Cisco Aironet 350 Series AP is available in a rugged version (AIR-AP352E2R-x-K9). This enhanced version

includes two RP-TNC connectors for use with optional antennas, an extended operating temperature range of -20 to

55 C, allowing for placement outdoors in a NEMA case or in harsh indoor environments such as warehouses and

factories, and a durable metal enclosure. With its metal enclosure, the Cisco Aironet 350 Series AP is UL 2043

certiﬁed, and designed to achieve plenum rating as deﬁned by various municipal ﬁre codes. The Cisco Aironet 350

Series AP is also available in a standard version (AIR-AP352E2C) with a plastic enclosure and two captured,

nonremovable 2.2 dBi diversity dipole antennas.

Laptop with

PC Card Adapter

Roaming

Access Point

Tablet with

PC Card Adapter

Desktop with

PCI Adapter

Access Point

Handheld with

PC Card Adapter

Switch with Inline Power

(Cisco Catalyst 3524 PWR-XL) Router

Laptop with

PC Card Adapter

LAN/WAN

Cisco Systems, Inc.

Page 3 of 10

Intelligent Networking Features for a Scalable, Manageable Solution

The Cisco Aironet 350 Series extends end-to-end intelligent networking to the wireless access point with support for

enterprise-class virtual LANs (VLANs) and quality of service (QoS). An ideal choice for enterprise installations, the

Cisco Aironet 350 Series can manage up to 16 VLANs (Figure 2), which allows customers to differentiate LAN

policiesand services, such as securityand QoS, for different users.For example, enterprise customers canuse different

VLANs to segregate employee trafﬁc from guest trafﬁc, and further segregate those trafﬁc groups from high-priority

voice trafﬁc. Trafﬁc to and from wireless clients with varying security capabilities can be segregated into VLANs with

varying security policies. For example, VLANs allow educational institutions to secure faculty and administrator

trafﬁc from student trafﬁc traveling over the same infrastructure. Implementing VLAN segmentation increases

wireless LAN manageability and security.

Figure 2 Indoor Wireless VLAN Deployment

With support for 802.1p QoS, the Cisco Aironet 350 Series provides trafﬁc prioritization for packets traveling to

and from the access point over Ethernet. Delay-sensitive trafﬁc, such as voice and video, can be prioritized over

data trafﬁc for improved user experience and optimal network utilization. Software and radio ﬁrmware upgrades

provide the capability to upgrade to future QoS standards such as 802.11e. Supporting the voice prioritization

schemes for 802.11b mobile phones, the Aironet 350 Series further enables quality voice-over-wireless-LAN

solutions.

Management VLAN

(VLAN-id 10)

SSID = Engineering

SSID = Guest

SSID = Engineering

SSID = Human Resources

SSID = Marketing

Enterprise Network

Access Point #1

Channel 1

802.1Q Trunk

Native VLAN = 10

802.1Q Trunk

Native VLAN = 10

Access Point #2

Channel 6

Layer 3 Switch

RADIUS Server

Cisco Systems, Inc.

Page 4 of 10

Simplified Deployment and Reduced Total Cost of Installation and Ownership

TheCiscoAironet350SeriesAPincludes a 10/100Ethernetuplinkfor seamless integrationwithexistingwired LANs.

Tominimizeinstallation costs, the Cisco Aironet 350Series AP draws operating power froma powered Ethernet port.

This line power conﬁguration works with all Cisco line power-enabled devices such as Catalyst switches and line

power patch panels (see Figures 3-5) A line power injector, included with the product, can also be used to power the

Cisco Aironet 350 Series AP.

Figure 3 The AP can utilize a Cisco Catalyst 3524-PWR-XL for its power

Figure 4 A Cisco Catalyst Inline Power Patch Panel may be used to power the AP

Figure 5 Cisco also offers a power injector to power the Cisco Aironet 350 Series AP

Cisco Aironet 350 Series

Access Point Switch with inline power

(e.g. Cisco Catalyst

3524 PWR-XL)

LAN

up to 300 ft Wiring Closet

Cisco Aironet 350 Series

Access Point

LAN

Switch

(without inline power)

Inline power

patch panel

(e.g. Cisco Catalyst

inline Power

Patch Panel)

up to 300 ft Wiring Closet

Cisco Aironet 350 Series

Access Point Switch

(without inline power)

Cisco Aironet

Power Injector

Universal

Power Supply

up to 300 ft

Power Strip

LAN

Wiring Closet

Cisco Systems, Inc.

Page 5 of 10

Industry-Leading WLAN Performance, Range, and Reliability

The 100-mW transmit power and receive sensitivity of the Cisco Aironet 350 Series AP leads the industry in range

and reliability. Antenna diversity and superior delay spread (multipath) characteristics of the Cisco Aironet 350 Series

deliver improved performance even in harsh environments such as warehouses, factories, and metal buildings.

Administrators can conﬁgure the radio transmit power (1, 5, 20, 30, 50, and 100 mW) on the Cisco Aironet 350

Series to meet speciﬁc coverage requirements and minimize interference. In addition to an AP with two captured 2.2

dBi antennas, an AP with two RP-TNC connectors is offered for more challenging applications, where a broad

portfolio of removable antennas can be used to further increase range and reliability.

Investment Protection

To protect the users’ investment, all Cisco Aironet 350 Series APs and bridges feature sufﬁcient Flash memory to

handle future ﬁrmware upgrades.

Enterprise-Class Wireless LAN Security

Wireless LAN security is a primary concern. The Cisco Aironet 350 Series secures the enterprise network with a

scalable and manageable system featuring the award-winning Cisco Wireless Security Suite. Based on the 802.1X

standard for port-based network access, the Cisco Wireless Security Suite takes advantage of the Extensible

Authentication Protocol (EAP) framework for user-based authentication (Figure 6).

Figure 6 The Cisco Wireless Security Suite is an Enterprise-Class Security System Based on the

802.1X Architecture

RADIUS server delivers

key to Access Point

Client Adapter and Access Point activate

WEP and use dynamic WEP key for transmission

RADIUS server authenticates user;

RADIUS server and client adapter derive WEP key

Aironet 350 Series

Access Point with LEAP

Wireless Computer with LEAP

User performs network logon

(username and password)

Access Point blocks

all user requests

to access LAN

Client associates

with Access Point

Aironet 350 Series

Access Point with LEAP

Wireless Computer

with LEAP

Access Switch

Campus Network

RADIUS Server

Access Switch

User Database

Campus Network

RADIUS Server

LEAP Authentication

and Dynamic WEP Key Generation

User Database

Cisco Systems, Inc.

Page 6 of 10

The Cisco Wireless Security Suite interoperates with a range of client devices. It supports all 802.1X authentication

types,includingEAPCisco Wireless(LEAP), ExtensibleAuthenticationProtocol-TransportLayer Security (EAP-TLS)

and types that operate over EAP-TLS, such as Protected Extensible Authentication Protocol (PEAP), EAP-Tunneled

TLS (EAP-TTLS) and EAP-Subscriber Identity Module (EAP-SIM). A wide selection of Remote Access Dial-In User

Service (RADIUS) servers, such as the Cisco Secure Access Control Server (ACS), can be used for enterprise-class

centralized user management that includes:

• Strong, mutual authentication to ensure that only legitimate clients associate with legitimate and authorized

network RADIUS servers

• Dynamic per-user, per-session encryption keys that automatically change on a conﬁgurable basis to protect the

privacy of transmitted data

• Stronger WEP keys provided by pre-standard Temporal Key Integrity Protocol (TKIP) enhancements such as

message integrity check (MIC), per-packet keys via initialization vector hashing and broadcast key rotation

• RADIUS accounting records for all authentication attempts.

Integrated Management for Configuration, Monitoring, and Troubleshooting

The Cisco Aironet Series offers simpliﬁed installation and conﬁguration, for rapid, anytime, anywhere installation,

conﬁguration, and management (see Figure 7). The series supports Web-based management and Simple Network

Management Protocol (SNMP) features to aid monitoring, troubleshooting, software download, and event logging.

The frequency agility option of the Cisco Aironet Series takes the guesswork out of channel conﬁguration. In this

mode, the AP automatically scans the area and selects the least-congested channel. The installer does not need to be

aware of the settings of other Cisco APs in the coverage area. For enterprise management, the Cisco Aironet Series

providessupport for Cisco Discovery Protocol(CDP) to enable auto discovery ofCisco Aironet APs and bridgesusing

Cisco enterprise management applications such as CiscoWorks2000. Additionally, Cisco Aironet APs support

standard SNMP Management Information Base (MIB) II, Cisco Aironet Series private MIB, and 802.11b MIB.

Cisco Aironet Series APs can also be managed via the console or the Telnet interface.

Cisco Systems, Inc.

Page 7 of 10

Figure 7 The Access Point Management System’s Express Setup screen provides all the settings required for

basic conﬁguration of the access point.

Industry-Leading WLAN Performance and Scalability

All Cisco Aironet Series APs feature load-balancing services. Up to three APs, conﬁgured for different channels,

can be colocated to achieve aggregate peak capacity of 33 Mbps for a single coverage area. Load-balancing policies

based on number of users, error rates, and signal strengths redistribute users to deliver more balanced collision

domains—improving overall performance for installations covering a large number of users.

Broadcast and multicast ﬁltering also enhance scalability. Filtering allows administrators to select the amount of such

frames that enter the WLAN, conserving the shared bandwidth. Layer 3 IP Net and IP Socket ﬁlters are also provided.

Reliability and High-Availability that Enterprise Installations Count On

For business-critical deployments, a Cisco Aironet AP can be conﬁgured as a redundant hot standby to another

AP in the same coverage area. The hot-standby AP continually monitors the primary AP on the same channel, and

assumes its role in the rare case of a failure of the primary AP.

Comprehensive WLAN Solution

Cisco offers a comprehensive WLAN solution including APs and bridges, a variety of client adapters

supporting all popular operating systems, a broad selection of antennas, as well as a security server and

enterprise management applications.

Because it is a part of the Cisco Aironet Series, the Cisco Aironet 350 AP delivers the high level of security,

manageability, scalability, and cost-effectiveness needed to deliver ubiquitous enterprise wireless services that extend

user mobility and enhance overall productivity. Table 1 provides speciﬁcations on the Cisco Aironet 350 Series AP.

Cisco Systems, Inc.

Page 8 of 10

Table 1 Cisco Aironet 350 Series Speciﬁcations

Part Numbers AIR-AP352E2C, the standard AP

AIR-AP352E2R-A-K9, the rugged AP configured for operation in most of the Americas

AIR-AP352E2R-E-K9, the rugged AP conﬁgured for operation in most of Europe

AIR-AP352E2R-J-K9, the rugged AP conﬁgured for operation in Japan

AIR-AP352E2R-S-K9, the rugged AP conﬁgured for operation in Singapore and

France

For more details on country speciﬁc ordering information see the following link:

http://www.cisco.com/go/aironet/compliance

Data Rates Supported 1, 2, 5.5, and 11 Mbps

Network Standard IEEE 802.11b

Uplink Auto-sensing 10/100BaseT Ethernet

Frequency Band 2.4 to 2.497 GHz

Network Architecture Types Infrastructure

Wireless Medium Direct Sequence Spread Spectrum (DSSS)

Media Access Protocol Carrier sense multiple access with collision avoidance (CSMA/CA)

Modulation DBPSK @1 Mbps; DQPSK @ 2 Mbps; CCK @ 5.5 and 11 Mbps

Operating Channels North America: 11; ETSI: 13; Japan: 14

Non-overlapping Channels Three

Receive Sensitivity 1 Mbps: –94 dBm

2 Mbps: –91 dBm

5.5 Mbps: –89 dBm

11 Mbps: –85 dBm

Delay Spread 1 Mbps: 500 ns

2 Mbps: 400 ns

5.5 Mbps: 300 ns

11 Mbps: 140 ns

Available Transmit Power

Settings 100 mW (20 dBm)

50 mW (17 dBm)

30 mW (15 dBm)

20 mW (13 dBm)

5 mW (7 dBm)

1 mW (0 dBm)

Maximum power setting will vary according to individual country regulations.

Range (typical @ 100-mW

transmit power setting with

2.2 dBi diversity dipole

antenna)

Indoor:

130 ft (39.6 m) @ 11 Mbps

350 ft (107 m) @ 1 Mbps

Outdoor:

800 ft (244 m) @ 11 Mbps

2000 ft (610 m) @ 1 Mbps

Compliance Operates license free under FCC Part 15 and complies as a Class B device;

complies with DOC regulations; complies with ETS 300.328, FTZ 2100, and MPT

1349 standards; rugged version complies with UL 2043

Cisco Systems, Inc.

Page 9 of 10

SNMP Compliance MIB I and MIB II

Antenna AIR-AP352E2C: Two nonremovable 2.2-dBi diversity dipoles

AIR-AP352E2R-x-K9: Two RP-TNC connectors (antennas optional, none supplied

with unit)

Encryption Key Length 128-bit

Virtual LAN (VLAN) Support Allows segmentation of up to 16 user groups creating increased system ﬂexibility

by allowing differentiation of LAN policies and services, such as security and QoS,

for different users.

Quality of Service

(QoS) Support Prioritization of trafﬁc for different application requirements to improve the voice

and video user-experience.

Security Cisco Wireless Security Suite including:

Authentication:

• 802.1X support including LEAP, PEAP, EAP-TLS, EAP-TTLS, and EAP-SIM to yield

mutual authentication and dynamic, per-user, per-session WEP keys

• MAC address and by standard 802.11 authentication mechanisms

Encryption:

• Support for static and dynamic IEEE 802.11 WEP keys of 40 bits and 128 bits

• Pre-standard TKIP WEP enhancements: key hashing (per-packet keying),

message integrity check (MIC) and broadcast key rotation

Status Indicators Three indicators on the top panel provide information concerning association

status, operation, error/warning, ﬁrmware upgrade, and conﬁguration, network/

modem, and radio status

Automatic Conﬁguration

Support BOOTP and DHCP

Remote Conﬁguration Support Telnet, HTTP, FTP, TFTP, and SNMP

Local Conﬁguration Direct console port (with supplied serial cable)

Dimensions 6.30 in. (16 cm) wide x 4.72 in. (12 cm) deep x 1.45 in. (3.7 cm) high

Weight Standard version: 12.3 oz (350g)

Rugged version: 1.43 lbs (.648 kg)

Plenum Rated Enclosure Metal case available with AIR-AP352E2R-x-K9

Environmental AIR-AP352E2C:

Temperature: 32oto 122oF (0oto 50oC)

10 to 90% (noncondensing)

AIR-AP352E2R-x-K9

Temperature: –4oto 131oF (–20oto 55oC)

10 to 90% (noncondensing)

Input Power Requirements 24VDC +/- 10% to 60 VDC (Ethernet line power)

Warranty One year

Table 1 Cisco Aironet 350 Series Speciﬁcations (Continued)

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 526-4100

European Headquarters

Cisco Systems International BV

Haarlerbergpark

Haarlerbergweg 13-19

1101 CH Amsterdam

The Netherlands

www-europe.cisco.com

Tel: 31 0 20 357 1000

Fax: 31 0 20 357 1100

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

www.cisco.com

Tel: 408 526-7660

Fax: 408 527-0883

Asia Paciﬁc Headquarters

Cisco Systems, Inc.

Capital Tower

168 Robinson Road

#22-01 to #29-01

Singapore 068912

www.cisco.com

Tel: +65 6317 7777

Fax: +65 6317 7799

Cisco Systems has more than 200 ofﬁces in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on the

Cisco Web site at www.cisco.com/go/offices

Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica • Croatia

Czech Republic • Denmark • Dubai, UAE • Finland • France • Germany • Greece • Hong Kong SAR • Hungary • India • Indonesia • Ireland

Israel • Italy • Japan • Korea • Luxembourg • Malaysia • Mexico • The Netherlands • New Zealand • Norway • Peru • Philippines • Poland

Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore • Slovakia • Slovenia • South Africa • Spain • Sweden

Switzerland • Taiwan • Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam • Zimbabwe

All contents are Copyright © 1992–2003, Cisco Systems, Inc. All rights reserved. Aironet, Cisco, Cisco IOS, Cisco Systems, and the Cisco Systems logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in

the U.S. and certain other countries.

All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.

(0304R)

04/03 BW9083

Wi-Fi Certiﬁcation

Table 1 Cisco Aironet 350 Series Speciﬁcations (Continued)

Este manual sirve para los siguientes modelos

Otros manuales de Punto de acceso inalámbrico de Cisco

Cisco

Cisco Aironet 1500 Series Manual de usuario

Cisco

Cisco Small Business AP541N Manual de instrucciones

Cisco

Cisco Catalyst IW9167E Manual

Cisco

Cisco ISR Manual de usuario

Cisco

Cisco Aironet 3600 Series Manual de usuario

Cisco

Cisco Linksys WAP610N Manual de usuario

Cisco

Cisco IW3702 Manual de usuario

Cisco

Cisco WAP121 Manual de instrucciones

Cisco

Cisco WAP361 Manual de usuario

Cisco

Cisco Cisco Aironet Wireless LAN Client Manual de usuario

Cisco

Cisco Small Business WAP44 Manual de instrucciones

Cisco

Cisco Aironet 1850 Series Guía de referencia rápida

Cisco

Cisco IW3702 Manual de usuario

Cisco

Cisco WAP121 Manual de usuario

Cisco

Cisco Aironet 1140 Series Manual de usuario

Cisco

Cisco Aironet AIR-AP1252AG-A-K9 Manual

Cisco

Cisco aironet 2800 series Guía de referencia rápida

Cisco

Cisco WAP121 Manual de instrucciones

Cisco

Cisco Catalyst 9166 Series Manual

Cisco

Cisco 1142 - Aironet Standalone AP Manual de usuario

Cisco

Cisco Aironet 1815T Manual de usuario

Cisco

Cisco Catalyst 9124AX Series Manual

Cisco

Cisco WAP200 - Small Business Wireless-G Access... Manual de usuario

Cisco

Cisco WAP2000 Manual de instrucciones

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario