Cisco CVR100W Manual de usuario

Quick Start Guide

Cisco Small Business

CVR100W Wireless-N VPN Router

Package Contents

•CVR100W Wireless-N VPN Router

•Power Adapter

•Quick Start Guide

•Ethernet Cable

•Pointer Card with Product Warranty

2 Cisco CVR100W Wireless-N VPN Router Quick Start Guide

Welcome

Thank you for choosing the Cisco CVR100W Wireless-N VPN Router. The

CVR100W provides simple, affordable, secure business-class connectivity

to the Internet for small office/home office (SOHO) and remote

professionals.

This guide describes how to physically install your CVR100W and launch

web-based Configuration Utility to configure and manage your CVR100W.

For additional information, see www.cisco.com/go/cvr100w.

CVR100W Features

Front Panel

Front Panel Buttons

Do-Not-

Disturb

Mode

Button

This button turns on or turns off the lights on the front panel

of the CVR100W. Turning this button on or off will not affect

the normal operation of the CVR100W.

•When this button is turned on, all lights on the front panel

are off and the Do-Not-Disturb Mode light on the back

panel is solid green.

•When this button is turned off, all lights on the front panel

are on and the Do-Not-Disturb Mode light is off.

WPS

Button

This button configures wireless access for devices in your

network that are WPS-enabled. See Front Panel Lights for

more information about the WPS light.

Wireless

Button

This button enables or disables the wireless module. See

Front Panel Lights for more information about the WLAN

light.

Cisco CVR100W Wireless-N VPN Router Quick Start Guide 3

Front Panel Lights

LAN

(1-4)

The numbered lights correspond to the LAN ports on the

back panel of the CVR100W.

•Solid blue when the CVR100W is connected to a device

through the corresponding LAN port (1, 2, 3, or 4).

•Flashes blue when the CVR100W is sending or receiving

data over the LAN port.

•Off when the LAN port has no connection.

WPS •Solid blue when the WPS connection is configured.

•Flashes blue when the WPS connection is in progress or

the WPS process is experiencing problems.

•Off when the WPS process finishes or there is no WPS

connection.

WLAN •Solid blue when the wireless module is enabled with

100% Wi-Fi power.

•Solid amber when the wireless module is enabled with

50% Wi-Fi power.

•Flashes blue when the CVR100W is sending or receiving

data on the wireless module.

•Off when the wireless module is disabled.

WAN •Solid blue when the CVR100W is connected to the

Internet through your cable or DSL modem.

•Flashes blue when the CVR100W is sending or receiving

data through the WAN port.

•Off when the WAN port has no connection.

POWER •Solid blue when the CVR100W is powered on and is

operating normally.

•Flashes blue when the system is booting or is upgrading

the firmware.

•Off when the CVR100W is powered off.

4 Cisco CVR100W Wireless-N VPN Router Quick Start Guide

Back Panel

Mounting the CVR100W

You can place your CVR100W on a desktop or mount it on a wall.

Placement Tips

• Ambient Temperature—To prevent the CVR100W from overheating,

do not operate it in an area that exceeds an ambient temperature of

104°F (40°C).

•AirFlow—Be sure that there is adequate air flow around the CVR100W.

• Mechanical Loading—Be sure that the CVR100W is level and stable to

avoid any hazardous conditions.

Place the CVR100W on a flat surface so that it sits on its four rubber feet.

WAN The WAN (Internet) port is connected to your Internet device, such

as a cable or DSL modem.

LAN (1-4) These ports provide a LAN connection to network devices, such as

PCs, print servers, or switches.

RESET The RESET button has two functions:

•Reboot:Press the RESET button for at least 1 but no more than

5 seconds with a pencil tip to reboot the unit.

• Reset to Factory Defaults: Press and hold the RESET button for

more than 5 seconds to reboot the unit and restore the factory

defaults. Changes that you have previously made to the

CVR100W settings are lost.

12VDC This port is where you connect the power adapter (12 V/0.5 A).

POWER Press this button to power the CVR100W on and off.

Do-Not-

Disturb

Mode

Light

•Solid green when the Do-Not-Disturb Mode button on the front

panel is turned on and the CVR100W is operating normally.

•Flashes green when the Do-Not-Disturb Mode button is turned

on but the Internet connection has problems.

•Off when the Do-Not-Disturb Mode button is turned off.

Cisco CVR100W Wireless-N VPN Router Quick Start Guide 5

Wall Mounting

The CVR100W can be wall-mounted. The wall-mounting hardware is

user-supplied. The ports on the back panel must face either upward or

downward when mounting the CVR100W to a wall.

WARNING Insecure mounting might damage the device or cause injury.

Cisco is not responsible for damages incurred by insecure

wall-mounting.

Connecting the CVR100W

NOTE The wireless module of the CVR100W is enabled by default. You

can connect one PC with an Ethernet cable or through a wireless

connection to perform the initial configuration. Use the default SSID

name and pre-shared key that are provided on the label at the bottom of

the unit to connect the PC to your wireless network for the first time.

STEP 1Power off all equipment, including the cable or DSL modem, the PC

that you will use to connect to the CVR100W, and the CVR100W.

STEP 2Connect the supplied power adapter to the 12VDC port on the

back panel. Plug the other end of the power adapter into an

electrical outlet. Make sure that the POWER button is turned off.

CAUTION Use only the power adapter that is supplied with the unit.

Using a different power adapter could damage the unit.

STEP 3Connect one end of an Ethernet cable to your cable or DSL

modem. Connect the other end to the WAN port on the back panel.

STEP 4Connect one end of a different Ethernet cable to one of the LAN

ports on the back panel. Connect the other end to an Ethernet port

on the PC that you will use to run web-based Configuration Utility.

NOTE Skip this step if you want to connect the PC to the CVR100W

through a wireless connection.

STEP 5Power on all connected devices including the cable or DSL

modem and the PC and wait until the connections are active.

STEP 6Press the POWER button on the back panel to power on the

CVR100W.

6 Cisco CVR100W Wireless-N VPN Router Quick Start Guide

STEP 7To connect the PC to your wireless network for the first time, you

can configure the wireless connection using the default SSID name

and pre-shared key that are provided on the product label.

A sample configuration is illustrated here.

Getting Started with the Configuration

The Setup Wizard and web-based Configuration Utility are supported on

Microsoft Internet Explorer 6.0 or later, Mozilla Firefox 3.0 or later, Apple

Safari 3.0 or later, and Google Chrome 5.0 or later.

To log in to web-based Configuration Utility and complete the initial

configuration by using the Setup Wizard:

STEP 1Connect a PC to an available LAN port on the back panel and power

on the PC. Your PC will become a DHCP client of the CVR100W.

STEP 2Start a web browser. In the address bar, enter the default IP

address of the CVR100W: 192.168.1.1.

NOTE If the default IP address of the CVR100W conflicts with

another device (such as ADSL modem or cable modem) on the

same network, its default IP address will be automatically changed

to 10.10.10.1. You must use the new default IP address to log in to

the utility when IP address conflict occurs.

STEP 3When the login page appears, choose the language that you prefer

to use in the utility and enter the username and password.

The default username is cisco. The default password is cisco.

Usernames and passwords are case sensitive.

STEP 4Click Log In. The Setup Wizard will now launch.

STEP 5Follow the on-screen prompts to complete the initial configuration.

Power

Supply

Internet

Access

Devices

Local

Network

Devices

Wireless

Devices

Cisco CVR100W Wireless-N VPN Router Quick Start Guide 7

For security purposes, change the default password as instructed

by the Setup Wizard to prevent unauthorized access.

After the initial configuration is complete, go to the Advanced

Settings pages to configure other advanced features. You are

required to log in to the utility again with the new password. See

the help pages or the Cisco CVR100W Wireless-N VPN Router

Administration Guide for more information on configuring the

advanced features.

Where to Go From Here

Support

Cisco Small Business

Support Community

www.cisco.com/go/smallbizsupport

Cisco Small Business

Support and Resources

www.cisco.com/go/smallbizhelp

Phone Support Contacts www.cisco.com/go/sbsc

Cisco Small Business

Firmware Downloads

www.cisco.com/go/smallbizfirmware

Select a link to download firmware for Cisco

Small Business Products. No login is

required.

Product Documentation

Cisco CVR100W www.cisco.com/go/cvr100w

Cisco Small Business

Cisco Partner Central

for Small Business

(Partner Login Required)

www.cisco.com/web/partners/sell/smb

Cisco Small Business

Home

www.cisco.com/smb

78-20934-01

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

www.cisco.com

Small Business Support, Global: www.cisco.com/go/sbsc

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates

in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:

www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their

respective owners. The use of the word partner does not imply a partnership relationship

between Cisco and any other company. (1110R)

Printed in China PRC

78-20934-01

6001-11190062R(YT)

Otros manuales para CVR100W

Tabla de contenidos

Otros manuales de Enrutador de red de Cisco

Cisco

Cisco IE 4000 Manual

Cisco

Cisco Firepower 1120 Manual de usuario

Cisco

Cisco Universal Broadband Router Cisco uBR10012 Manual de usuario

Cisco

Cisco Nexus 7000 Series Manual de instrucciones

Cisco

Cisco Linksys WET610N Manual de usuario

Cisco

Cisco uBR924 Hoja de instrucciones

Cisco

Cisco WS-C6503 Manual de usuario

Cisco

Cisco 7600 Series Manual

Cisco

Cisco RV130 Manual de instrucciones

Cisco

Cisco EA-Series Manual de usuario

Cisco

Cisco WRT300N Manual de usuario

Cisco

Cisco 800 Series Guía

Cisco

Cisco Aironet 350 Series Manual de usuario

Cisco

Cisco ASR 9000 Series Manual de usuario

Cisco

Cisco 12006 series Instrucciones de funcionamiento y seguridad

Cisco

Cisco ASR 902 Manual de usuario

Cisco

Cisco RV042 - Small Business Dual WAN VPN Router Manual de usuario

Cisco

Cisco Firepower 1120 Manual de usuario

Cisco

Cisco 1720 Manual

Cisco

Cisco uBR900 Series Manual de usuario

Cisco

Cisco ASR1004 - ASR 1004 Modular Expansion Base Manual de usuario

Cisco

Cisco Dial NMS Manual de usuario

Cisco

Cisco ASR 9001 Manual de usuario

Cisco

Cisco 910 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

EnGenius

EnGenius ESR-9710 Manual de usuario

LevelOne

LevelOne FBR-1416 Manual de usuario

Dynacord

Dynacord Promatrix 6000 Manual de usuario

Lorex

Lorex F5D8230-4 Manual de usuario