Cisco MX200 G2 Manual de usuario

Installing Cisco TelePresence MX200 G2 - Wheel Base

This installation guide covers MX200 G2 with a wheel base.

Dimensions

Height: 1480mm / 58.3in.

Width: 995 mm / 39.2 in.

Depth: 715 mm / 28.0in.

Weight total: 33 kg / 73 lb

Weight monitor: 24 kg / 53lb

Manpower

Two people working together are required to mount the

monitor to the base module.

Room setup

Explore the Cisco Project Workplace website to

find inspiration and guidelines when preparing your

office or meeting room for video conferencing,

http://www.cisco.com/go/projectworkplace

Documentation

Cisco Spark: Visit the Cisco Spark help site to find

more information about Spark registered room

systems, http://help.ciscospark.com

Other services: Visit the Cisco web site to find user

guides and compliance and safety information for

the video system, http://www.cisco.com/go/mx-docs

Installing Cisco TelePresence MX200 G2 - Wheel Base

• Wheel base

• Column

• Screws for

the base

• Screwdriver

Accessories:

• Microphone(s)

• Cables

• Screws for mounting the monitor

• Gloves

Monitor

Back cover

Touch controller

Installing Cisco TelePresence MX200 G2 - Wheel Base

Optional

It is possible to replace the wheels with rubber pads.

The rubber pads are kept underneath the wheel

base, and must be moved to their correct position.

M5x8 (Allen key, 3 mm)

1Mount the wheel base

You may place the column on the empty

wheel base box as illustrated. Then it is

easier to enter the screws from below.

4 ×

4 × M6x20

Installing Cisco TelePresence MX200 G2 - Wheel Base

2Mount the monitor

The monitor may be tilting slightly

forward. If you gently pull it to a vertical

position, the screws enter more easily.

Front

Use gloves when

handling the monitor.

Remove the cable

channel lid for now.

You need it in step 4.

4 × M6x16

Installing Cisco TelePresence MX200 G2 - Wheel Base

3Connect the cables

Thread the cables up

through the hole in the base.

For maintenance only

Reset to factory

settings

Audio line output

Always use the provided

power cable.

The wall socket outlet must

be easily accessible after

installation.

Power switch Audio line input

LAN1

Video input2

(e.g. PC)

Video output2

(e.g. 2nd display)

Power (100-240 VAC, 50/60 Hz)

Touch

controller1

USB, for future use

HDMI

DVI-I

Microphone3

2nd microphone2, 3

1Use the cable that is labeled

with for the Touch controller;

use the cable that is labeled

with for the LAN

2Optional

3Always use the provided

Cisco TelePresence Table

Microphone 20

Installing Cisco TelePresence MX200 G2 - Wheel Base

• Connect to power and LAN/Ethernet.

• Switch on the system. The power switch is

placed next to the power connector at the

rear side of the system.

Wait while the unit starts up. Normally this takes a few

minutes. It may include automatic software upgrade and

restart of the Touch controller.

• Follow the instructions on the Touch controller.

Cisco Spark: To find more information on how to

get started with Spark registered systems, visit

http://help.ciscospark.com and look for Getting Started

articles for room systems.

Other services: For further information on set-up and

configuration, download the Getting Started Guide from the

Cisco web site, http://www.cisco.com/go/mx-docs

Never move the camera manually when power is switched

on; always use the camera control function on the Touch

controller to change the camera position.

5Start up the system

Snap on the cable

channel lid for strain relief.

Lead the cables out at the

front or back as appropriate.

4Snap on the cable channel lid

Installing Cisco TelePresence MX200 G2 - Wheel Base

EMC Class A declaration

WARNING: This is a class A product. In a domestic environment this

product may cause radio interference in which case the user may be

required to take adequate measures.

声明

此为

A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种

情况下，可能需要用户对其干扰采取切实可行的措施。

WARNING: This is a class A product. In a domestic environment

this product may cause radio interference in which case the user

may be required to take adequate measures.

6Mount the back cover

Wind up the cables on the hook on the

back cover when rolling the unit. Also

hang the Touch controller on the hook.

Lift this handle to

lock/unlock the back

cover. Use both

hands if required.

Cisco has more than 200 offices worldwide.

Find an overview of the offices on the Cisco web site at

http://www.cisco.com/go/offices

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or

its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to

this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the

property of their respective owners. The use of the word partner does not imply a

partnership relationship between Cisco and any other company. (1110R)

Otros manuales para MX200 G2

Tabla de contenidos

Otros manuales de Sistema de conferencias de Cisco

Cisco

Cisco TelePresence System Codec C90 Manual de servicio

Cisco

Cisco DX series Manual de usuario

Cisco

Cisco Webex Room Kit Pro Manual de usuario

Cisco

Cisco MX300 G2 Manual de usuario

Cisco

Cisco MX300 G2 Manual de instrucciones

Cisco

Cisco TelePresence SX10 Manual de usuario

Cisco

Cisco EX90 Manual de usuario

Cisco

Cisco TelePresence SX20 Manual de usuario

Cisco

Cisco BE6000 Guía

Cisco

Cisco Board Manual de usuario

Cisco

Cisco TelePresence Profile Series Manual de usuario

Cisco

Cisco TelePresence SX10 Manual de usuario

Cisco

Cisco TelePresence IX5000 Manual de usuario

Cisco

Cisco SX80 Manual de usuario

Cisco

Cisco TelePresence CE9.13 Manual de usuario

Cisco

Cisco MX200 G2 Manual de usuario

Cisco

Cisco EX60 Manual de usuario

Cisco

Cisco TelePresence Profile Series Manual de usuario

Cisco

Cisco TelePresence SX10 Manual de servicio

Cisco

Cisco TelePresence Profile Series Manual de instalación y operación

Cisco

Cisco 7937 Manual de usuario

Cisco

Cisco TANDBERG Edge MXP Instrucciones de montaje

Cisco

Cisco EX60 Manual de usuario

Cisco

Cisco 7935 - IP Conference Station VoIP Phone Manual de instrucciones

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario