Cisco TelePresence Touch 10 Manual de usuario

Cisco TelePresence Touch 10

INSTALLATION GUIDE

78-100157-02D0 | SEPTEMBER 2016.

The Cisco TelePresence Touch 10 is powered through Power over Ethernet (PoE). On the

MX700 and MX800 endpoints it is powered direct from the endpoint. If your endpoint or

network infrastructure [1] does not support PoE, you can add this by using a midspan PoE

injector [2].

The Ethernet cable (not included) must be rated for PoE use. Open the lid and connect the

Ethernet cable to the Touch10, and connect the other end:

• to a PoE enabled port ( ) on the TelePresence endpoint

• or, to a PoE enabled network port ( )[3]

• or, use a midspan PoE injector [2]

NOTE: Please refer to the online endpoint documentation to verify the connectivity

recommendation.

The Cisco TelePresence Touch 10 is used with the Cisco TelePresence endpoints.

Box contents

• Cisco TelePresence Touch 10

[1] The PoE source (network switch) must be located in the same building as the Cisco TelePresence Touch 10.

Otherwise the Cisco Aironet Power Injector must be used. The Ethernet cable (Cat5) can be up to 100 m (330 ft).

[2] The Cisco Aironet Power Injector (CTS-PWR-AIR-INJ5) can be ordered separately.

[3] Remote pairing is available on selected products.

Sound bar

for audio

adjustments

The Touch screen is

adjustable to accommodate

individual ergonomic needs

Light

indicator

Ethernet with PoE

(for power and Ethernet)

Connecting the cablesCisco TelePresence Touch 10

Remote pairing

Connect Touch 10

Connect the Touch 10 to a network socket.

Option A: When the network socket does not provide Power over Ethernet (PoE) you will

need a mid-span PoE injector to power Touch 10.

Option B: The network socket provides Power over Ethernet (PoE).

Touch 10 set-up

Once Touch 10 is connected to power, the set-up procedure begins. Follow the

instructions on screen.

When the Select codec to pair with dialog appears, note the following:

• A list of codecs signalling that they are available for pairing will show up in the dialog.

Tap the name of the codec you want to pair to followed by Start Pairing.

• If your codec does not appear in the list of available codecs, you can pair the devices

manually. Click Select codec manually..., enter the IP address or host name of the

codec, and tap Start Pairing.

• You have to enter the codec’s administrator username and password for the pairing to

commence.

If Touch 10 needs software upgrade, new software will be downloaded from the codec

and installed on the unit automatically as part of the set-up procedure. Touch 10 restarts

after the upgrade.

You can verify that Touch 10 is successfully connected to the codec by checking that the

codec address is displayed in the top banner.

A B

PoE rated

Ethernet cable

PoE rated

Ethernet cable

Standard

Ethernet cable

Direct pairing

Connect Touch 10

Connect the Touch 10 to the network socket on the codec or endpoint.

Option C: Note that the SX Series do not provide Power over Ethernet (PoE), so you need

a mid-span PoE injector to power Touch 10.

Option D: The MX Series (MX200G2, MX300G2, MX700, MX800) provides Power over

Ethernet (PoE).

Touch 10 set-up

Once Touch 10 is connected to power, the set-up procedure begins. Follow the

instructions on screen.

If Touch 10 needs software upgrade, new software will be downloaded from the codec

and installed on the unit automatically as part of the set-up procedure. Touch 10 restarts

after the upgrade.

You can verify that Touch 10 is successfully connected to the codec by checking that the

codec address is displayed in the top banner.

C D

PoE rated

Ethernet cable

The endpoint

(MX Series)

Standard

Ethernet cable

PoE rated

Ethernet cable

The codec

(SX80)

Additional product support

User documentation

For more information about Cisco TelePresence Touch 10, see the user documentation that

is available on our web site: http://www.cisco.com/go/touch-docs

If asked to sign in or to congure your system, you may want to consult the user

documentation for the TelePresence endpoint.

• SX Series: http://www.cisco.com/go/sx-docs

• MX Series: http://www.cisco.com/go/mx-docs

Regulatory Compliance and Safety Information for Touch 10 is available on our web site.

Go to http://www.cisco.com/go/touch-docs and navigate to Install and Upgrade Guides.

Support

For support, go to: http://www.cisco.com/support

On our web site you can nd an overview of the worldwide Cisco contacts.

Go to: http://www.cisco.com/web/siteassets/contacts

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Dr.

San Jose, CA 95134 USA

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its aliates in the U.S.

and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.

Third-party trademarks mentioned are the property of their respective owners. The use of the word partner

does not imply a partnership relationship between Cisco and any other company. (1110R)

Some illustrations used in this guide may dier from the actual product.

Tabla de contenidos

Otros manuales de Sistema de conferencias de Cisco

Cisco

Cisco Webex Share Manual de usuario

Cisco

Cisco SX80 Manual de servicio

Cisco

Cisco TelePresence System Codec C40 Manual de servicio

Cisco

Cisco TelePresence MCU 4203 Manual de usuario

Cisco

Cisco Profile Series Manual de usuario

Cisco

Cisco 7935 - IP Conference Station VoIP Phone Manual de instrucciones

Cisco

Cisco TelePresence Profile Series Manual de usuario

Cisco

Cisco Webex Room 70 Dual G2 Manual de usuario

Cisco

Cisco Quick Set C20 Manual de usuario

Cisco

Cisco Spark Board 55 Manual de usuario

Cisco

Cisco SX80 Manual de servicio

Cisco

Cisco TelePresence SX20 Manual de servicio

Cisco

Cisco TelePresence SX20 Guía de configuración

Cisco

Cisco TelePresence SX20 Manual de servicio

Cisco

Cisco TelePresence IX5000 Manual de usuario

Cisco

Cisco Aironet 3500 Series Guía de referencia

Cisco

Cisco MX200 G2 Manual de usuario

Cisco

Cisco CTS-SX10-K9 Manual de usuario

Cisco

Cisco TelePresence DX70 Manual de servicio

Cisco

Cisco TelePresence Conductor Manual de usuario

Cisco

Cisco TelePresence SX20 Manual de servicio

Cisco

Cisco EX90 Manual de usuario

Cisco

Cisco EX60 Manual de usuario

Cisco

Cisco TelePresence System Codec C90 Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario