Chamberlain Security+ 974CB Manual de usuario

The Light Control is for indoor use only.

Exposure to moisture can cause electric shock

or fire.

Unplug receiver before opening cover to

set/change code.

WARNING

RATING

Resistive Load ......................................1200 Watts

Motor Load...................................................1/3 HP

Incandescent Lamp.................................600 Watts

The Plug-In Light Control is designed to operate

lights according to the rating chart shown. Please

read the instructions and power limitations carefully to

ensure proper use and maximum safety. NOT

recommended for use with toasters, coffee pots,

or halogen lighting systems.

This Light Control can be operated by Models 900

Series portable remote controls and Keyless Entries.

The Plug-In Light Control receiver needs to learn

the remote control code. Follow the instructions

below:

• Select a remote control push button to operate the

light control.

• Pry up the lower edge of the actuator with a coin or

screwdriver as shown.

• Plug the light control into a 120 Vac polarized

outlet. The plug contacts are designed for

polarized outlets only. The power indicator light will

turn on if there is power to the outlet.

• Press and

hold

the remote control push button you

chose to activate the light control.

• Then press and release the “Smart” (learn) button

on the receiver with a pen or pencil tip. The

adjacent yellow indicator light will FLASH once.

• Release the remote control push button. Code

setting is now complete. Snap actuator back on

light control.

The remote control push button must be held down

until the receiver indicator light flashes for the light

control to learn the remote control's code

If the receiver SMART button is pressed and held

until the yellow indicator light alongside goes out (in

about 6 seconds), all memorized codes will be

erased.

Actuator

OPERATING INSTRUCTIONS

If two or more light products are installed, the

receivers must be located at least 10 feet apart to

prevent electronic interference.

• First, plug the lamp into a

wall

outlet and turn it ON.

• With the lamp still in the ON position, plug it into

polarized outlet on the light control. The bulb will

not

light.

• TO TEST: Press and release the light control

actuator. The light should turn ON. Press the

remote control push button. The light should turn

OFF.

If the remote control does not activate the light, check

to be sure:

• You are pressing the remote control push button

selected to operate the light control.

• The remote control battery has power. Refer to the

remote control instructions for battery changing

information.

120VAC

Polarized

Wall Outlet

Smart

(Learn)

Button

Smart

Indicator

Light

Power Indicator

Light

Select a

push button

Model 974CB

Plug-In Light Control

OWNER’S INSTRUCTIONS

To comply with FCC rules, adjustment or modification of receiver and/or

transmitter is prohibited, except for changing the code setting and replacing

the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.

Otros manuales de Controladores de Chamberlain

Chamberlain

Chamberlain Garos CS 300 Manual de usuario

Chamberlain

Chamberlain LiftMaster Professional 915LM Manual de usuario

Chamberlain

Chamberlain 874 Series Manual de usuario

Chamberlain

Chamberlain LA400UL Guía de inicio rápido

Chamberlain

Chamberlain CLDM1ANZ Manual de usuario

Chamberlain

Chamberlain 945C Manual de usuario

Chamberlain

Chamberlain 041DJ002 Manual de usuario

Chamberlain

Chamberlain Liftmaster PROFESSIONAL 412-315HM Manual de usuario

Chamberlain

Chamberlain CAP2D Manual de usuario

Chamberlain

Chamberlain 855CB Manual de usuario

Chamberlain

Chamberlain LA412UL Guía de inicio rápido

Chamberlain

Chamberlain myQ 821LM Manual de usuario

Chamberlain

Chamberlain Dial Code Manual de usuario

Chamberlain

Chamberlain LA500UL Guía de inicio rápido

Chamberlain

Chamberlain SMART GARAGE CONTROL Manual de usuario

Chamberlain

Chamberlain LiftMaster Professional CB224 Manual de usuario

Chamberlain

Chamberlain Motorlift GWAP120 Manual de usuario

Chamberlain

Chamberlain Motorlift GWUP180 Manual de usuario

Chamberlain

Chamberlain 811LM Manual de usuario

Chamberlain

Chamberlain RED/GREEN LIGHT CONTROL KIT Manual de usuario

Chamberlain

Chamberlain T Manual de usuario

Chamberlain

Chamberlain MyQ Manual de usuario

Chamberlain

Chamberlain LiftMaster K001A6039 Manual de usuario

Chamberlain

Chamberlain 395LM Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario