CAS PB Series Manual de usuario
Presented By
Dallas HoustonAustinFt Worth
NicolScales.com
800.225.8181
Contact Us
Nicol Scales & Measurement is an ISO Accredited Calibration
Company that has provided calibration, repair and sales of all types
of weighing and measurement products since 1931.
2
3
CONTENTS
PRECAUTIONS.................................................. 4
PREFACE ............................................................... 6
NAMES AND FUNCTIONS.......................... 6
ASSEMBLY & SETTING............................... 7
OPERATIONS...................................................... 8
1. Simple Weighing Mode ..................................... 8
2. Weighing with Tare............................................ 9
3. Hold Function..................................................... 9
4. Setup Mode ....................................................... 10
5. How to use print(Option).................................11
BATTERY MAINTENACE......................... 16
ERROR MESSAGE......................................... 16
SPECIFICATIONS .......................................... 17
4
PRECAUTIONS
5
PRECAUTIONS
6
PREFACE
Thank you for purchasing CAS PB(Portable Bench).
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your special departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the PB(Portable Bench).
Please keep it handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW
DISPLAY & KEYBOARD
■PB(LCD)
7
■KEY FUNCTIONS
KEYS FUNCTIONS
Used to set the zero point.
Used to input or cancel the weight of tare.
Used to make the weight of commodity stable.
This weight is average value.
Used to turn on/off the scale or backlight. (If you press the button long
time, Power is turned off)
ASSEMBLY & SETTTING
■If you unscrew a bolt at Bracket handle( ), you can separate the indicator(①).②
■Please Unscrew a limit bolt(M6 X 10), before Use a scale.
8
OPERATIONS
■Turn on the display by pressing key. Then, the display will show all the segments and
count up "0" to "9". You may stop this automatic counting by pressing the key.
■When you turn on the display, make sure that platter is empty. Otherwise, display will show
"Err 1", an error of initial zero range. Please refer to "ERROR MESSAGE" section for
more information on page 16
■When the weight becomes stable the display shows the stable sign ( ○) on.
■You may need to make it "0.00" by pressing key unless the display indicate "0.00"
under the empty platter.
1. Simple Weighing Mode
①Place a commodity on
the platter. ②Remove the commodity
from the platter.
9
2. Weighing with Tare
■TARE means the weight of container being used for a commodity.
■TARE key function is to subtract the weight of the container from full weight loaded.
Place a container on①
the platter. ②Press the key. then
display will show the "0.00". ③Place a commodity into
the container, then the
display will show only the
weight of the commodity.
④Remove container and
commodity, then the display
will show the weight of the
container with "-" symbol.
⑤Press the key, then
display will show the "0.00".
3. Hold Function
①When the weight is
unstable, press the key.
②"HOLD" will be displayed
twice
③Then average value will be
show twice And the "HOLD"
function will be removed
automatically
10
4.SETUP MODE
4-1. How to Go to Setup Mode
Make sure that power is OFF. While pressing the ZERO key, press the key. The display shows “U
SEt”. You can select each menu by pressing the ZERO key and change the setting by pressing the
TARE key. If you press ZERO key, you can save current setting and go next mode.
4-2. Set up Mode Table
MENU DISPLAY DESCRIPTIONS
“noSnd” Do not use printer. (No Send Mode)
“K-Snd” Push the key , Print out. (Command Mode)
“S-Snd” Weight is Stable, Print out. (Stable Mode)
“U-Snd” Print out, continuously. (Continue Mode)
Printer
“C-Snd” Weight is changed, Print out. (Change Weight Mode)
“
AP oFF ” Do not useAuto Power Off function.
“AP 10 ” Power turns to be off automatically when the scale is
not in operation over for 10 minutes.
“AP 30 ” Power turns to be off automatically when the scale is
not in operation over for 30 minutes.
Auto Power Off
“AP 60 ” Power turns to be off automatically when the scale is
not in operation over for 60 minutes.
“bLon ” Use back-light.
“bL10 ” Back-light is on 10 seconds.
“bL30 ” Back-light is on 30 seconds.
Backlight
“
bL oFF ” Do not use back-light.
Brightness “1~7” Youcan set backlight brightness. (Default :3)
Italic Bold : Default Setting
※
Otros manuales para PB Series
1
Tabla de contenidos
Otros manuales de Escala de CAS
CAS
CAS PR2-15 Manual de usuario
CAS
CAS BF-1410 Manual de usuario
CAS
CAS LDT Manual de usuario
CAS
CAS PR-T Series Manual de usuario
CAS
CAS Retail PR-T Series Manual de usuario
CAS
CAS PB Series Manual de usuario
CAS
CAS SW-1S Series Manual de usuario
CAS
CAS CL5500 Series Manual de usuario
CAS
CAS PR-C series Manual de usuario
CAS
CAS PD-I Instrucciones de uso
CAS
CAS GBF-1257 Manual de usuario
CAS
CAS CL8000 Series Manual de usuario
CAS
CAS CASTON II Manual de usuario
CAS
CAS DL-60 Manual de usuario
CAS
CAS CBX Manual de usuario
CAS
CAS PD-II Manual de usuario
CAS
CAS CL5000J Series Manual de usuario
CAS
CAS Atronics ACS Manual de usuario
CAS
CAS RW-2601P Series Manual de usuario
CAS
CAS AP Series Manual de usuario
