Car-Interface CI-RL3-SC15 Manual de usuario
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
r.LiNK Video inserter
CI-RL3-SC15
Compatible with Volvo vehicles with
Sensus Connect infotainment
and 8.7inch touch-monitor
Video-inserter for rear-view camera
and two more video inputs
Product features
Video-inserter for factory-infotainment systems
1 CVBS Input for rear-view camera
2 CVBS Video-inputs for after-market Video sources (e.g. USB-Player, DVB-T Tuner)
Automatic switching to rear-view camera input on engagement of the reverse gear
Video-in-motion (ONLY for connected video-sources)
Video-inputs NTSC compatible
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
Page2
Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the compatibility of vehicle and accessories
1.3. Boxes and connectors –video interface
1.4. Settings of the 8 Dip switches (black)
1.4.1. Enabling the interface’s video inputs (dip 2-3)
1.4.2. Rear-view camera setting (dip 5)
1.5. Settings of the 4 Dip switches (CAN function –red)
2. Installation
2.1. Place of installation
2.2. Connection schema
2.3. Connection - picture signal cable
2.4. Connection –10pin Power / CAN cable
2.5. Analog power supply for the video interface
2.6. Connection - video-sources
2.6.1. Audio insertion
2.6.2. After-market rear-view camera
2.6.2.1. Case 1: Interface receives the reverse gear signal
2.6.2.2. Case 2: Interface does not receive the reverse gear signal
2.7. Connection - video-interface and external keypad
2.8. Picture settings
3. Interface operation
3.1. By factory infotainment button
3.2. By external keypad
4. Specifications
5. FAQ –Trouble Shooting-Interface functions
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
Page3
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. Apart from using this
product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-
camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).
Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to
one year after purchase we offer free software-updates for our interfaces. To receive a free
update, the interface has to be sent in at own cost. Wages for de-and reinstallation and
other expenditures involved with the software-updates will not be refunded.
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
video interface’s place of installation must be free of moisture and away from heat sources.
Before the final installation in the vehicle of the video sources, we recommend a test-run
to ensure the compatibility of vehicle and interface. Due to changes in the production of
the vehicle manufacturer there’s always a possibility of incompatibility.
1.1. Delivery contents
Take down the serial number of the interface and store this manual for support
purposes: ____________________
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
Page4
Compatibility
Brand
Compatible vehicles
Compatible systems
Volvo
S60 from model year 2020,
S90 from model year 2017,
V60 from model year 2016,
V90 from model year 2016,
XC40 from model year 2019,
XC60 from model year 2018,
XC90 from model year 2015
Sensus Connect with 8,7”
monitor
Limitations
Video only The interface inserts ONLY video signals into the infotainment.
For inserting Audio signals either the possibly existing factory
audio-AUX-input or a FM-modulator can be used. If 2 audio
sources shall be connected to the infotainment, an additional
electronic is necessary to switch them.
Video sources NTSC video sources compatible only.
Factory rear-view camera Automatically switching-back from inserted video to factory rear-
view camera is only possible while the reverse gear is engaged.
To delay the switch-back an additional electronic part is required.
1.2. Checking the compatibility of vehicle and accessories
1.3. Boxes and connectors –video interface
The video-interface converts the connected after-market sources video signals into a LVDS
signal which is inserted in the factory monitor using separate trigger options. Further it reads
the vehicle’s digital signals out of the vehicle’s CAN-bus and converts them for the video
interface.
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
Page5
1.4. Settings of the 8 Dip switches (black)
Some settings have to be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
1.4.1. Enabling the interface’s video inputs (dip 2-3)
Only the enabled video inputs can be accessed by switching through the interface’s video
sources. It is recommended to enable only the required inputs. So the disabled inputs will be
skipped while switching through the video interfaces inputs.
1.4.2. Rear-view camera setting (dip 5)
If set to OFF, the interface switches to factory picture while the reverse gear is engaged to
display factory rear-view camera or factory optical park system picture.
If set to ON, the interface switches to its rear-view camera input while the reverse gear is
engaged.
Note: Dips 1, 4, 6, 7 und 8 are out of function and have to be set to OFF!
1.5. Settings of the 4 Dip switches (CAN functions –red)
All 4 dip-switches of the video interface have no function for normal
use and have to be set to OFF.
Dip position down is ON and position up is OFF.
Vehicle/Navigation
Dip 1
Dip 2
Dip 3
Dip 4
Volvo XC90
OFF
OFF
OFF
OFF
After each Dip-switch-change a power-reset of the Can-box has to be performed!
Dip
Function
ON (down)
OFF (up)
1
No function
Set to OFF
2
CVBS Video 1-input
enabled
disabled
3
CVBS Video 2-input
enabled
disabled
4
No function
set to OFF
5
Rear-view cam type
after-market
factory or none
6
No function
set to OFF
7
No function
set to OFF
8
No function
set to OFF
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
Page6
2. Installation
To install the interface, first switch off the ignition and disconnect the vehicle’s battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1. Place of installation
The interface is supposed to be installed at a suitable location behind the factory monitor.
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
Page7
2.2. Connection schema
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
Page8
2.3. Connection –picture signal cable
Remove the head unit
Disconnect the factory picture signal cable’s blue coloured female HSD connector from the
monitor’s rear-side and connect it to the purple coloured HSD connector of the enclosed
picture signal cable.
Connect the waterblue coloured female HSD connector of the enclosed picture signal cable
to the monitor’s previously become free blue coloured male HSD connector.
Connect the opposite female waterblue coloured HSD+2 connector of the picture signal
cable to the waterblue coloured male HSD+2 connector of the video interface.
Note: The colours of the HSD connector of head unit and factory harness may vary.
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
Page9
2.4. Connection –10pin Power / CAN cable
Connect the 10pin power / CAN cable’s female 10pin connector
to the 10pin connector of the video interface.
Connect the single grey wire of the 10pin power / CAN cable
to the vehicle’s CAN-Low.
Connect the blue wire of the 10pin Power / CAN Cable
to the vehicle’s CAN-High.
Note: To handle the CAN+ and the CAN- connection, the enclosed
20pin OBD connector can alternatively be used,but a
perfect connection from behind without that connector
will avoid loose problems and dysfunction.
Connect the single brown wire of the 10pin Power / CAN Cable to vehicle’s negative
ground.
Connect the single red wire of the 10pin power/CAN cable to +12V ACC power supply.
Note: The CAN communication doesn’t succeed in all vehicles. If, after connecting the 10pin
Power / CAN cable, no interface LED lightens up while the ignition is turned on, refer to
chapter “Analogue power supply for the video interface”.
Version 30.10.2020 HW:BSV-LVDS(V97)/(V45) CI-RL3-SC15
Page10
2.5. Analog power supply for the video interface
Connect the red wire ACC-OUT and the purple coloured wire Manual ACC of the
12pin interface cable to +12V ACC power supply.
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Car-Interface
Car-Interface
Car-Interface CI-RL3-LR17 Manual de usuario
Car-Interface
Car-Interface CI-CARPLAY-NTG5 Manual de usuario
Car-Interface
Car-Interface TV-Free CI-TF-SC14 Manual de usuario
Car-Interface
Car-Interface RL4-MM-NP Manual de usuario
Car-Interface
Car-Interface CI-RL3-LR16-8 Manual de usuario
Car-Interface
Car-Interface RL4-MM-R Manual de usuario
Car-Interface
Car-Interface CI-RL4-UCON8-LV Manual de usuario
Car-Interface
Car-Interface RL4-MBN6 Manual de usuario
Car-Interface
Car-Interface CI-VL7-SY2 Manual de usuario
Car-Interface
Car-Interface CI-C1-RNSE Manual de usuario
Car-Interface
Car-Interface CI-RL4-MBN6 Manual de usuario
Car-Interface
Car-Interface CI-RL3-C3D Manual de usuario
Car-Interface
Car-Interface v.LOGiC V5-CIC-F-PNP Manual de usuario
Car-Interface
Car-Interface CI-CARPLAY-MMI3G Manual de usuario
Car-Interface
Car-Interface c.LOGiC lite CI-C1-CCC Manual de usuario
Car-Interface
Car-Interface CI-RL4-MIB100 Manual de usuario
Car-Interface
Car-Interface CI-RL3-MIB-TT-LA Manual de usuario
Car-Interface
Car-Interface TV-Free CI-TF-UCON22 Manual de usuario
Car-Interface
Car-Interface TV-Free TF-NTG1 Manual de usuario
Car-Interface
Car-Interface TV-Free Manual de usuario
