Car-Interface CI-RL-PCM3-TF Manual de usuario

Version 13.03.2015 CI-RL-PCM3-TF

r.LiNK-Interface

CI-RL-PCM3-TF

Rear-view camera-input

and

video-in-motion

for Porsche vehicles with

PCM 3 and PCM 3.1 navigation systems

Only for vehicles WITHOUT factory rear-view camera

Product features

• Plug and play interface

• Integrated into the vehicle infotainment

• Rear-view camera input (+ coding)

• Rear-view camera power (+12V max. 400mA)

• Video-in-motion

• Automatic switching to rear-view camera input

•Optionally coding of ParkAssistant to retrofit factory PDC

Version 13.03.2015 RL-PCM3-TF

Page1

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Check compatibility of vehicle and accessories

1.3. Setting the Dip-switches of the CAN-Box RLC-TV-521

1.4. Pin-assignments

2. Connection schema

3. Installation

3.1. Interconnecting CAN-box, harness and factory navigation monitor

3.2. Connection to rear-view camera

3.3. Coding of the rear-view camera (only PCM3.1)

3.3.1. Decoding of the rear-view camera (only PCM3.1)

3.4. Optionally coding of ParkAssistant to retrofit factory PDC (only PCM3.1)

3.4.1. Decoding of ParkAssistant (only PCM3.1)

3.5. Alternatively coding and decoding of rear-view camera and ParkAssistant (e.g.

if steering-wheel buttons not existing, only PCM3.1)

3.6. Coding and decoding of rear-view camera (only Cayenne with PCM3)

4. Activation of the video-in-motion function

5. Specifications

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. This product should only

be used while standing or to display fixed menus or rear-view-camera video when the

vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We

offer free software-updates for our interfaces for one year after purchase. To receive a free

update, the interface must be sent in at own cost. Labor cost for and other expenses

involved with the software-updates will not be refunded.

Version 13.03.2015 RL-PCM3-TF

Page2

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

place of installation must be free of moisture and away from heat sources.

1.1. Delivery contents

1.2. Check compatibility of vehicle and accessories

CAN-box

RLC-TV521

HW_____ SW_____

Harness

RLC-POR03

Take down the SW-version and HW-version of the interface boxes, and store this

manual for support purposes.

Requirements

Vehicle Porsche Cayenne, Panamera, 911, Boxster, Cayman

Navigation PCM 3 (only Cayenne version) , PCM 3.1 (911, Boxster and

Cayman only from software version 4.xx)

Limitations

Video-in-motion Internal DVD video cannot be watched!

Version 13.03.2015 RL-PCM3-TF

Page3

1.3. Setting the dip switches of the CAN-box RLC-TV521

Vehicle/ navigation

Dip 1

Dip 2

Dip 3

Dip 4

Dip 5

Dip 6

PCM 3 with video-in-motion activated

OFF

PCM 3 with video-in-motion deactivated

OFF

PCM 3.1 with video-in-motion activated

OFF

PCM 3.1 with video-in-motion deactivated

OFF

Note: Dip switch functions of the CAN-box RLC-TV-521

Dip 1 –activation TV-free

Dip 2 –rear-view camera existing

Dip 3 –Coding rear-view camera by white cable

Dip 4 –Coding ParkAssistant by white cable (only PCM3.1, PCM3 no function)

Dip 5 –no function

Dip 6 –no function / CAN-bus termination

1.4. Pin-assignments

Pin-assignment factory connector

No liability for vehicle wire colors and pin definition!

Possible changes by the vehicle manufacturer. The given

information must be verified by the installer.

Pin-assignment of the CAN-box RLC-TV521 (Molex 8pin)

Cable colour

Pin-No.

Assignment

●Yellow

Pin 4

CAN-HIGH –connection to the head-unit

●Blue

Pin 3

CAN-LOW –connection to the head-unit

●●Yellow/Black

Pin 8

CAN-HIGH –connection to the vehicle

●●Blue/Black

Pin 7

CAN-LOW –connection to the vehicle

●Red

Pin 1

+12V permanent

●Black

Pin 5

Ground

●Green

Pin 2

+12V rear-view camera (max. 400mA)

●White

Pin 6

Alternatively coding

Cable colour

Assignment

Pin No.

●Red

+12V battery

Pin 15

●Black

Ground

Pin 12

●●Orange/brown

CAN-low

Pin 9

●●Orange/purple

CAN-high

Pin 11

Version 13.03.2015 RL-PCM3-TF

Page4

2. Connection schema

Version 13.03.2015 RL-PCM3-TF

Page5

3. Installation

Switch off ignition and disconnect the vehicle’s battery! If according to factory rules

disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in

sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a

resistor lead.

Place of installation is on rear of the head-unit.

3.1. Interconnecting CAN-Box, harness and factory navigation monitor

Connect female 8pin Molex connector of harness RLC-POR03 to male 8pin Molex

connector of CAN-box RLC-TV521.

Transfer female Quadlock connector of vehicle harness from rear of the head-unit

into male Quadlock connector of harness RLC-POR03.

Plug female Quadlock connector of harness RLC-POR03 into male Quadlock

connector on the rear of the head-unit.

Version 13.03.2015 RL-PCM3-TF

Page6

3.2. Connections to rear-view camera

Connect the video RCA of the rear-view camera to the female RCA connector of

harness RLC-POR03.

Connect the green cable of harness RLC-POR03 to the camera power supply (+12V

max 400mA). The green cable is high when reverse gear is engaged (if ignition is off,

too). The power will be deactivated from a speed of 20 km/h.

Version 13.03.2015 RL-PCM3-TF

Page7

3.3. Coding of the rear-view camera (only PCM3.1)

It is necessary to code the rear-view camera input of the PCM 3.1 to use it for an after-

market rear-view camera.

1. Turn on ignition

2. Wait until the head-unit has booted

3. Press and hold steering-wheel button HASH KEY/MODE

4. Press and hold steering-wheel button ACCEPT (observe the sequence!)

5. Hold both buttons. During configuration the red and

blue LED are blinking short inside the CAN-box (visible

at the male 8pin Molex connector). The PCM makes a

reset after 5-10 sec.

6. Disengage both steering-wheel buttons

7. The red and the blue LED inside the CAN-Box are

glowing and the menu „Rear-view camera“ appears in

the menu OPTION after a successful coding

3.3.1. Decoding of the rear-view camera (only PCM3.1)

It is possible to decode the coding of the rear-view camera input as follows:

1. Turn on ignition

2. Wait until the head-unit has booted

3. Press and hold steering-wheel button HASH KEY/MODE

4. Press and hold steering-wheel button HANG UP (observe the sequence!)

5. Hold both buttons. During configuration the red and blue LED are blinking inside the

CAN-box (visible at the male 8pin Molex connector). The PCM makes a reset after 5-

10 sec.

6. Disengage both steering-wheel buttons

7. The red and the blue LED inside the CAN-Box are glowing and the menu „Rear-view

camera“ disappears in the menu OPTION after a successful decoding

Steering-wheel buttons left

Steering-wheel buttons right

BACK

HANG UP

HASH KEY/MODE

Version 13.03.2015 RL-PCM3-TF

Page8

3.4. Optionally coding of ParkAssistant to retrofit factory PDC (only PCM3.1)

It is necessary to code the ParkAssistant of the PCM 3.1 to retrofit factory PDC.

1. Turn on ignition

2. Wait until the head-unit has booted

3. Press and hold steering-wheel button BACK

4. Press and hold steering-wheel button ACCEPT (observe the sequence!)

5. Hold both buttons. During configuration the red and

blue LED are blinking inside the CAN-box (visible at the

male 8pin Molex connector). The PCM makes a reset

after 5-10 sec.

6. Disengage both steering-wheel buttons

7. The red and the blue LED inside the CAN-Box are

glowing and the menu „ParkAssistant“ appears in the

menu OPTION after a successful coding

3.4.1. Decoding of the ParkAssistant (only PCM3.1)

It is possible to decode the ParkAssistant as follows:

1. Turn on ignition

2. Wait until the head-unit has booted

3. Press and hold steering-wheel button BACK

4. Press and hold steering-wheel button HANG UP (observe the sequence!)

5. Hold both buttons. During configuration the red and blue LED are blinking inside the

CAN-box (visible at the male 8pin Molex connector). The PCM makes a reset after 5-

10 sec.

6. Disengage both steering-wheel buttons

7. The red and the blue LED inside the CAN-Box are glowing and the menu

„ParkAssistant“ disappears in the menu OPTION after a successful decoding

Steering-wheel buttons left

Steering-wheel buttons right

BACK

HANG UP

HASH KEY/MODE

Version 13.03.2015 RL-PCM3-TF

Page9

3.5. Alternatively coding and decoding of rear-view camera and ParkAssistant (e.g. if

steering-wheel buttons not existing, only PCM3.1)

Alternatively to coding by steering-wheel buttons the coding and decoding of rear-view

camera and ParkAssistant can be done by loose white cable in connection with dip 3 and 4 of

CAN-box RLC-TV521.

1. Turn on ignition

2. Wait until the head-unit has booted

3. Set dip 3 and dip 4 of CAN-box (depending on the desired coding/decoding)

4. Put +12V for 5 sec. to the white cable

5. During configuration the red and blue LED are blinking

short inside the CAN-box (visible at the male 8pin Molex

connector). The PCM makes a reset after 5-10 sec.

6. The red and the blue LED inside the CAN-Box are

glowing and the menu „Rear-view camera“ respectively

“ParkAssistant” appears in the menu OPTION after a

successful coding (or disappears after successful

decoding)

Note: After a coding or decoding another coding isn’t possible within the next 60 seconds!

If there are factory-PDC existing in the car you have to set Dip 4 to ON while coding. If not

the factory PDC will be decoded!

Dip

Function

OFF

Dip 3

Rear-view camera

Coding

Decoding

Dip 4

ParkAssistant

Coding

Decoding

BACK

HANG UP

HASH KEY/MODE

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Car-Interface

Car-Interface

Car-Interface RL4-NAC08 Manual de usuario

Car-Interface

Car-Interface CI-RL4-MIB100 Manual de usuario

Car-Interface

Car-Interface v.LOGiC CI-V5-CCC-PNP Manual de usuario

Car-Interface

Car-Interface CI-CARPLAY-MMI3G Manual de usuario

Car-Interface

Car-Interface CI-RL2-MBN45 Manual de usuario

Car-Interface

Car-Interface CI-RL4-MIB92 Manual de usuario

Car-Interface

Car-Interface r.LiNK CI-RL2-N900 Manual de usuario

Car-Interface

Car-Interface CI-RL4-UCON12 Manual de usuario

Car-Interface

Car-Interface CI-RL4-R40-E Manual de usuario

Car-Interface

Car-Interface CI-V5-CIC-F-PNP Manual de usuario

Car-Interface

Car-Interface TV-Free CI-TF-C20 Manual de usuario

Car-Interface

Car-Interface CI-RL3-SC15 Manual de usuario

Car-Interface

Car-Interface CI-RL5-MIB-STD2 Manual de usuario

Car-Interface

Car-Interface CI-RL4-R40 Manual de usuario

Car-Interface

Car-Interface TV-Free CI-TF-SC14 Manual de usuario

Car-Interface

Car-Interface CI-RL4-LR17 Manual de usuario

Car-Interface

Car-Interface RL4-MIB92 Manual de usuario

Car-Interface

Car-Interface CI-VL2-CCC Manual de usuario

Car-Interface

Car-Interface v.LOGiC V5-CIC-F-PNP Manual de usuario

Car-Interface

Car-Interface CI-UCON7-JEEP Manual de usuario

Car-Interface

Car-Interface CI-C2-MK-AUX Manual de usuario

Car-Interface

Car-Interface CI-RL4-SY3-R5 Manual de usuario

Car-Interface

Car-Interface v.LiNK CI-VL2-PC-HSD Manual de usuario

Car-Interface

Car-Interface TV-Free TF-NTG1 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario