Canon IXUS 170 Manual de usuario
CEL-SV6YA210
ENGLISH
Getting Started
2
Package Contents
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-11LH/NB-11L
Battery Charger
CB-2LFE
Wrist Strap*
* For attachment instructions, refer to the Camera User Guide that can be downloaded
from the Canon website.
• Printed matter is also included.
• A memory card is not included.
Compatible Memory Cards
No memory card is included. Purchase one of the following kinds of card
as needed. These memory cards can be used, regardless of capacity. For
details on the number of shots and recording time per memory card, see
“Specifications” in the downloadable Camera User Guide.
• SD memory cards* • SDXC memory cards*
• SDHC memory cards* • Eye-Fi cards
* Cards conforming to SD standards. However, not all memory cards have been verified
to work with the camera.
About Eye-Fi Cards
This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check
with the card manufacturer.
Also note that an approval is required to use Eye-Fi cards in many countries
or regions. Without approval, use of the card is not permitted. If it is unclear
whether the card has been approved for use in the area, please check with
the card manufacturer.
Convention in This Guide
This guide uses IXUS 170 illustrations and screenshots for all explanations.
3
Manuals and Software
Manuals and Software
You can download manuals and software from the following
URL.
http://www.canon.com/icpd/
• With a computer connected to the Internet, access the above URL.
• Access the site for your country or region.
• Adobe Reader is required to view the manuals.
• You can also download software from the website. For instructions on
downloading and installing the software, refer to the Camera User Guide
available for download.
Initial Preparations
Initial Preparations
Charging the Battery Pack
1Insert the battery pack.
After aligning the marks on the battery
pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).
2Charge the battery pack.
Plug the power cord into the charger,
then plug the other end into a power
outlet.
The charging lamp turns orange, and
charging begins.
When charging is finished, the lamp turns
green. Remove the battery pack.
For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to “Specifications” in the
downloadable Camera User Guide.
4
Initial Preparations
Inserting the Battery Pack and Memory Card
1Open the cover.
Slide the cover ( ) and open it ( ).
2Insert the battery pack.
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
To remove the battery pack, press the
battery lock in the direction of the arrow.
3Check the card’s write-protect
tab and insert the memory card.
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
Insert the memory card facing as shown
until it clicks into the locked position.
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
4Close the cover.
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.
Terminals Battery Lock
Terminals
5
Initial Preparations
Setting the Date and Time
1Turn the camera on.
Press the ON/OFF button.
The [Date/Time] screen is displayed.
2Set the date and time.
Press the <q><r> buttons to choose an
option.
Press the <o><p> buttons to specify
the date and time.
When finished, press the <m> button.
3Set the home time zone.
Press the <q><r> buttons to choose
your home time zone.
Press the <m> button when finished.
After a confirmation message, the setting
screen is no longer displayed.
To turn off the camera, press the ON/OFF
button.
6
Initial Preparations
Changing the Date and Time
To adjust the date and time once you have set it, do the following.
1Press the <n> button.
2Move the zoom lever to choose the [3] tab.
3Press the <o><p> buttons to choose [Date/Time], and then press the
<m> button.
4Follow step 2 in “Setting the Date and Time” to adjust the settings.
5Press the <n> button.
Display Language
Change the display language as needed.
1Enter Playback mode.
Press the <1> button.
2Access the setting screen.
Press and hold the <m> button, and
then press the <n> button.
Press the <o><p><q><r> buttons to
choose a language, and then press the
<m> button.
7
Trying the Camera Out
Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1Turn the camera on and enter
[] mode.
Press the ON/OFF button.
Press the <o> button several times until
[] is displayed.
2Compose the shot.
To zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto)
as you watch the screen, and to zoom
away from the subject, move it toward
<j> (wide angle).
3Shoot.
Shooting Still Images
Press the shutter button lightly ( ).
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down ( ).
Shooting Movies
Press the movie button to start shooting,
and press it again to stop.
8
Trying the Camera Out
Viewing
1Enter Playback mode.
Press the <1> button.
2Browse through your images.
To view the previous or next image, press
the <q><r> buttons.
Movies are identified by a [ ] icon.
To play movies, go to step 3.
3Play movies.
Press the <m> button, press the
<o><p> buttons to choose [ ], and
then press the <m> button again.
Playback now begins, and after the movie
is finished, [ ] is displayed.
To adjust the volume, press the <o><p>
buttons.
Erasing Images
To erase the image you chose in step 2, do the following. Note that erased
images cannot be recovered.
1Press the <o> button.
2After [Erase?] is displayed, press the <q><r> buttons to choose
[Erase], and then press the <m> button.
9
CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
© CANON INC. 2015
Otros manuales para IXUS 170
1
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Cámara digital de Canon
Canon
Canon PowerShot G16 Manual de instrucciones
Canon
Canon ZR930 Manual de usuario
Canon
Canon IXUS 172 Manual de usuario
Canon
Canon EOS D60 Manual de usuario
Canon
Canon Powershot Pro70 Instrucciones de instalación
Canon
Canon 2665B001 Manual de usuario
Canon
Canon PowerShot S80 User Guide Basic Manual de usuario
Canon
Canon PowerShot IXS 980 IS Manual de usuario
Canon
Canon POWERSHOT A80 - Digital Camera - 4.0... Guía de inicio rápido
Canon
Canon DS126061 Manual de usuario
Canon
Canon EOS 3 Manual de instrucciones
Canon
Canon PowerShot A3150 IS Manual de usuario
Canon
Canon EOS M50 Manual de usuario
Canon
Canon PowerShot SD 700 IS Digital Elph Manual de usuario
Canon
Canon 5253B002 Manual de usuario
Canon
Canon GP series Manual de usuario
Canon
Canon Sure Shot 115U Manual de usuario
Canon
Canon PowerShot SX210 IS Manual de usuario
Canon
Canon EOS R Manual de usuario
Canon
Canon IXUS 220 HS Manual de usuario
