Canon PowerShot G16 Manual de instrucciones
PowerShot G16 Sending still images and movies between two
Canon-brand cameras (Wi-Fi function)
You can connect two cameras via Wi-Fi and send images between them as follows.
NOTE
•Only Canon-brand cameras equipped with a Wi-Fi function can be connected to
wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be
connected to if they do not have a Wi-Fi function. You cannot connect to
PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS
cameras with this camera.
•Up to 50 images can be sent together at once. You can send movies together as
long as the total playback time is within two minutes. However, Web services
may limit the number of images you can send. For details, refer to the Web
service you are using.
•Depending on the condition of the network you are using, it may take a long time
to send movies. Be sure to keep an eye on the camera battery level.
Connecting the cameras wirelessly
Perform the following operations on both of the cameras to be connected.
1. Press the <Playback> ( ) button on the camera.
2. Press the <Wi-Fi> ( ) button.
NOTE
When making the settings for a wireless LAN for the first time, a screen will appear for you to
register a nickname for the camera.
Press the <FUNC./SET> ( ) button, enter a nickname using the keyboard. This nickname will
appear on other devices on the wireless LAN when connecting from them.
3. Press the < >< >< >< > buttons to choose ( ), and then press the <FUNC./SET> (
) button.
4. Press the < >< > buttons to choose [Add a Device], and then press the <FUNC./SET> (
) button.
NOTE
•If you register a camera, that camera's name will appear on the screen in step 4. From the
second time onward, select the camera's name to make the connection.
5.The following screen appears.
Follow steps 1 4 on the target camera too.
Camera connection information will be added when [Start connection on target camera] is
displayed on both camera screens.
Once the other camera is registered, the screen for sending images will appear. Please see step 7
and later steps for instructions on how to send images.
6. Once both cameras are connected, a screen like the one below will appear.
NOTE
•Once you have connected to devices via Wi-Fi, recent destinations will be listed first
when you access the Wi-Fi menu by pressing the < >button. You can easily connect
again by pressing the < >< > buttons to choose the device name. To add a new device,
display the device selection screen by pressing the < >< > buttons, and then configure
the setting. If you prefer not to display recent target devices, press the <MENU > button,
and on the [ ] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
•To add multiple cameras, repeat the above procedures starting from step 2.
Sending Images to a Camera Individually
7. Press the < >< > buttons to choose [Send this image], and then press the <FUNC./SET> (
) button.
NOTE
•You can choose the resolution (size) of images to send by pressing the < >< >
buttons.
•Movies cannot be resized.
8. The following screen appears.
After sending images to the target camera, [Transfer completed] will be displayed, and the
camera returns to the screen shown in step 7.
Sending Multiple Images to a Camera
9. Press the < >< > buttons to choose [Select and send], and then press the <FUNC./SET> (
) button.
10. The following screen appears.
Press the < >< >< >< > buttons to choose an image to send, and then press the
<FUNC./SET> ( ) buttons.( ) will be displayed.
To cancel selection, press the <FUNC./SET> ( ) button again. ( ) is no longer displayed.
You can also choose images in step 2 by moving the zoom lever twice toward ( ) to access
single-image display and then pressing the < >< > buttons.
After you finish choosing images, press the <MENU> button.
11. The following screen appears.
Press the < >< > buttons to choose [Send], and then press the <FUNC./SET> ( ) button.
After [Transfer completed] is displayed, the camera returns to the screen shown in step 7.
NOTE
•You can choose the resolution (size) of images to send by pressing the < >< >
buttons.
Otros manuales para PowerShot G16
1
Tabla de contenidos
Otros manuales de Cámara digital de Canon
Canon
Canon Digital IXUS 300 Manual de usuario
Canon
Canon EOS REBEL XS Manual de usuario
Canon
Canon TL Manual de usuario
Canon
Canon PowerShot G9X Manual de usuario
Canon
Canon EOS REBEL T6 (W) Guía de instalación
Canon
Canon EOS R6 Instrucciones de montaje
Canon
Canon Powershot A570 IS Manual de usuario
Canon
Canon PowerShot SD630 Digital ELPH Camera Manual de usuario
Canon
Canon PowerShot SX700 HS Manual de usuario
Canon
Canon POWERSHOT SX40HS Manual de usuario
Canon
Canon PowerShot SD110 (PC1085) Manual de usuario
Canon
Canon EOS ELAN7NE-30V Manual de usuario
Canon
Canon EOS 70 Manual de usuario
Canon
Canon PowerShot SX100 IS Manual de usuario
Canon
Canon EOS Rebel Ti Manual de usuario
Canon
Canon EOS M6 Mark II Instrucciones de montaje
Canon
Canon Eos 1ds mark ii Manual de usuario
Canon
Canon EOS 6D Manual de usuario
Canon
Canon PowerShot SX260 HS Manual de usuario
Canon
Canon EOS 3 Manual de instrucciones
