C.A. Technologies Techline JR Manual de usuario

ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION Kit

1TJR Body Assembly 5 51-406 AluminumCup

260-TJR-30-XX Needle / Nozzle Set* 6 51-407 Plastic Cup

360-TJR-20 Air Cap 7 91-470 Cup and Collar

460-TJR-10-W Wrench & Brush Kit 8 91-471-50 Lids and Liners (50 Pack)

Repair Kit 60-TJR-10 Soft Seal Repair Kit 9 91-473 TJRPPS Adapter

TJR

TJR PPS

*See Needle & Nozzle Sets Chart

7 8 9

TJR

5 6

Available CAT Packs

- TJR

- TJR PPS

Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708

www.spraycat.com

Techline JR

GRAVITY FEED SPRAY GUN

PRODUCT INFORMATION

NEEDLES

PART NO. DESCRIPTION

60-TJR-30-08L 0.8 mmNeedle

60-TJR-30-12L 1.0 mm& 1.2 mmNeedle

60-TJR-30-14L 1.4 mmNeedle

NEEDLE & NOZZLE SETS

PART NO. DESCRIPTION

60-TJR-30-08 0.8 mmNeedle / Nozzle Set

60-TJR-30-10 1.0 mmNeedle / Nozzle Set**

60-TJR-30-12 1.2 mmNeedle / Nozzle Set**

60-TJR-30-14 1.4 mmNeedle / Nozzle Set**

* 1012 needle is used for both the 1.0 and 1.2 nozzle

** Included in standard TJR Kit

ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION Kit

1TJR Body Assembly 7 51-406 AluminumCup

260-TJR-30-12 Needle / Nozzle Set* 8 51-407 Plastic Cup

360-TJR-20 Air Cap 9 91-470 Cup and Collar

4 60-TJR-21 Round Pattern Kit 10 91-471-50 Lids and Liners (50 Pack)

560-TJR-10-W Wrench & Brush Kit 11 91-473 TJRPPS Adapter

660-TJR-30-10-G Glaze Nozzle 1.0 Repair Kit 60-TJR-10

TJR

Glaze

TJR

Glaze PPS

Soft Seal Repair Kit

ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION Kit

1TJR Body Assembly 6 51-406 AluminumCup

260-TJR-30-XX Needle / Nozzle Set* 7 51-407 Plastic Cup

360-TJR-20 Air Cap 8 91-470 Cup and Collar

4 60-TJR-21 Round Pattern Kit 9 91-471-50 Lids and Liners (50 Pack)

560-TJR-10-W Wrench & Brush Kit 10 91-473 TJRPPS Adapter

TJR

Deluxe

TJR

Deluxe

PPS

*See Needle & Nozzle Sets Chart (Soft Seal Repair Kit: 60-TJR-10)

TJR Deluxe

*No air needed when using Glaze Nozzle

*Uses1.2needlesuppliedin kit

*Inspired by Wayne Smith

89106 7

Available CAT Packs

- TJR Deluxe

- TJR Deluxe PPS

Available CAT Packs

- TJR Glaze

- TJR Glaze PPS

TJR Glaze

5 4

9117 8 10

Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708

www.spraycat.com

Techline JR Kits

GRAVITY FEED SPRAY GUN

PRODUCT INFORMATION

NEEDLE & NOZZLE SETS

PART NO. DESCRIPTION

60-TJR-30-10 1.0 mmNeedle / Nozzle Set

60-TJR-30-12 1.2 mmNeedle / Nozzle Set

* 1012 needle is used for both the 1.0 and 1.2 nozzle

NEEDLES

PART NO. DESCRIPTION

60-TJR-30-12L 1.0 mm& 1.2 mmNeedle

60-TJR-40-05 Round Pattern Kit Needle

NEEDLES

PART NO. DESCRIPTION

60-TJR-30-12L 1.2 mm& Glaze Needle

60-TJR-40-05 Round Pattern Kit Needle 1

ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION

1See Page 1 & 2 Air Cap 7 60-TJR-15 Fluid Control Knob / Lock

2See Page 1 & 2 Nozzle 8 60-TJR-14 Air Valve

360-TJR-11 Atomizing Black Spacer 9 60-TJR-12 Fan Control Knob

4See Page 1 & 2 TJR Gravity Cup 10 60-TJR-18 Air Inlet Fitting

560-TJR-16 Fluid Inlet 11 60-TJR-13 Air Control Knob

6See Page 1 & 2 Needle * 60-TJR-10 Repair Kit

*Indicates partincludedinrepairkit 60-TJR-10

Item 3 (Atomizing Spacer)

Front

Facetowards

Air Cap and

Nozzle

Back

Facetowards

the TJR gun

body

Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708

www.spraycat.com

Revised4/28/15

Operating and Maintenance Instructions for the CAT TJR Spray Gun

Setting Up The TJR Spray Gun

The TJR operates best with10PSIat the gun (operating pressure)

The TJRuses 3.5cfm.

The Tjr is supplied with an air inlet fitting which is ¼” NPT male. You will need to hook up a suitable length of 5/16”

air hose fitted with a ¼” NPS(F) connection.

Connect the gravity feed cup to the gun by screwing the cup onto the spray gun fluid inlet.

Adjusting Your Spray Gun

There are twomeans of adjusting airat thegun.The pattern adjusting

valve andthe air adjusting valve.

PatternAdjusting Valve

The pattern-adjustingvalveregulates airtothe“horns” of the gun air cap.

Horn air controls the shape of the spraypattern.

1. When the pattern adjusting valve is closed (turned completely

clockwise) - a round pattern results.

2.Openingthe pattern adjustingvalve(turn counter clockwise)

producesan increasinglywiderand flatterfan pattern.

3. When the maximum spray pattern (widest fan) is achieved,

additional turns will not affect the pattern.

Air Adjusting Valve

The air adjusting valve controls only the flow of air (CFM) to the air cap and has no effect on air pressure (PSI). The

valve is often referred to as the “cheater” valve as it is used to restrict air without adjusting the air regulator.

1. Closing theair-adjusting valve (turncounterclockwise) restricts theair flow.

2. Openingthe valve(clockwise) increases the volume (flow)ofair. This willaffect

the degree of atomization, but will not change the spraypattern.

3.The aircap (CFM) specification willdetermine the(CFM) requirements of thegun.

Using 60-TJR-30-10-G (Glaze Nozzle)

When using the new glaze nozzle the first thing you will notice is that there is no air cap, so you will need no air to

operate this gun with the glaze setup.

1. Once you have placed the glazing needle and nozzle tightly on the gun, choose the

cup you want to use and tighten everything down.

2. Fill the gravity cup with glaze and tighten the lid.

3. Gently press the nozzle tip against the surface you are glazing and pull the trigger.

4. When you come to the point where you no longer want to place the glaze, stop

pulling the trigger and the glaze will stop running from the tip.

5. You can also control the size of your glazing strip by turning the fluid control knob.

6. To clean simply pour out unused glaze and flush with solvent.

To Open

Air Cap Fluid Adjusting Valve

Pattern Adjusting Valve

Air Adjusting Valve Air Inlet

Fluid Inlet

60-TJR-30-10-G wasinspired by

Wayne Smith

Pattern Adjustment Diagram

1 32

Ø Ø

Este manual sirve para los siguientes modelos

Otros manuales de Pistola pulverizadora de pintura de C.A. Technologies

C.A. Technologies

C.A. Technologies Lynx L200C Manual de usuario

C.A. Technologies

C.A. Technologies CPR Manual de usuario

C.A. Technologies

C.A. Technologies TOMCAT 100C Guía de solución de problemas

C.A. Technologies

C.A. Technologies CAT-Xpress Guía de solución de problemas

C.A. Technologies

C.A. Technologies AutoCAT 100C Manual de usuario

C.A. Technologies

C.A. Technologies Panther 200H Manual de usuario

C.A. Technologies

C.A. Technologies H2O-CPR Manual de usuario

C.A. Technologies

C.A. Technologies AutoCAT 300C Manual de usuario

C.A. Technologies

C.A. Technologies FE-Line Fine Finish Manual de usuario

C.A. Technologies

C.A. Technologies LYNX L100CM Manual

C.A. Technologies

C.A. Technologies Panther 200C Manual de usuario

C.A. Technologies

C.A. Technologies Jaguar SLP Manual de usuario

C.A. Technologies

C.A. Technologies Lynx 100CVT Manual de usuario

C.A. Technologies

C.A. Technologies Panther 100G Manual de usuario

C.A. Technologies

C.A. Technologies Jaguar 300H Manual de usuario

C.A. Technologies

C.A. Technologies Jaguar 300 Series Manual de usuario

C.A. Technologies

C.A. Technologies Cougar Manual de usuario

C.A. Technologies

C.A. Technologies Lynx L100C Manual de usuario

C.A. Technologies

C.A. Technologies Lynx 100 Series Manual de usuario

C.A. Technologies

C.A. Technologies Lynx 100CM Manual de usuario

C.A. Technologies

C.A. Technologies AutoCAT 100CVT Manual de usuario

C.A. Technologies

C.A. Technologies CPR-FE Manual de usuario

C.A. Technologies

C.A. Technologies Lynx 300C Guía de solución de problemas

C.A. Technologies

C.A. Technologies Lynx 100C 1590 Manual de usuario

Manuales populares de Pistola pulverizadora de pintura de otras marcas

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Manual de usuario

Graco

Graco 246737 Manual de uso y cuidado

Binks

Binks SV100 Manual de usuario

Fimco

Fimco LG-4-3-1 Manual de usuario

AG SPRAY

AG SPRAY FS-ATV-25BL Manual de usuario

Nordson

Nordson MicroMax 2 Manual de usuario

Bonide

Bonide 051 Manual de operación

zogics

zogics Z-DAS Manual de usuario

KISANKRAFT

KISANKRAFT KK-KBS-165 Manual de usuario

Matrix

Matrix SG 650 Manual de usuario

Anest Iwata

Anest Iwata SGA-3 Guía de inicio rápido

paasche

paasche VV Hoja de datos

Carlisle

Carlisle DeVilbiss JGA-510 Manual de usuario

Gardena

Gardena 11120 Manual de usuario

Conrad

Conrad Hobby Airbrush K3 Manual de usuario

wiwa

wiwa 14025 R/F Manual de usuario

Graco

Graco EM 390 Manual de operación

DeVilbiss

DeVilbiss LUNA2i Manual de usuario