Bosch GLL 100 G Instrucciones de montaje
Operating / Safety Instructions
Consignes d’utilisation / de sécurité
Instrucciones de funcionamiento y seguridad
GLL 100 G
GLL 100 GX
IMPORTANT:
Read Before Using
IMPORTANT :
Lire avant usage
IMPORTANTE:
Leer antes de usar
English Version
See page 7
Version française
Voir page 34
Versión en español
Ver la página 65
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
-2-
GLL 100 G
GLL 100 GX
9 10
1
1
1
8
1
2
8
Off
5
6
7
3 4
11
12
500-540
-3-
C
BA
13
-4-
F
E
D
G
14
15
-5-
D1 F1
H I
-6-
B2 C2
D2 F2
-7-
27
1 608 M00 70K
25
BT 150
(0 601 096 B10)
24
1 600 A00 XD1
21
BM 1 (0 601 015 A11)
18
1 600 A00 19K
19
RM 1 (0 601 092 610)
26
BP 350
(0 601 015 B10)
15
20
RM 2 (0 601 092 710)
22
1 618 C01 44F
23
1 618 C01 44K
Professional
15
16
(1 600 A00 19K)
15
17
BM 3 (1 600 A00 19K)
15
13
14 14
13
13 13
14 14
-8-
Safety Symbols
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
This is the safety alert symbol. It is used
to alert you to potential personal injury
hazards. Obey all safety messages that
follow this symbol to avoid possible injury
or death.
DANGER indicates a hazardous situation
which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazardous
situation which, if not avoided, will result
in death or serious injury.
CAUTION, used with the safety alert
symbol, indicates a hazardous situation
which, if not avoided, will result in minor
or moderate injury.
-9-
Read all instructions. Failure to follow all
instructions listed below may result in hazardous
radiation exposure, electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
The term “tool” in the warnings listed below refers to your mains-
operated (corded) tool or battery-operated (cordless) tool.
The following labels are
on your laser tool for your
convenience and safety.
They indicate where the
laser light is emitted by the
tool. ALWAYS BE AWARE of their location when using the tool.
DO NOT direct the laser beam at persons or animals and do not
stare into the laser beam yourself. This tool produces
laser class 2 laser radiation and complies with 21 CFR
1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007. This can
lead to persons being blinded.
DO NOT remove or deface any warning or caution labels.
Removing labels increases the risk of exposure to laser
radiation.
Use of controls or adjustments or performance of
procedures other than those specified in this manual, may
result in hazardous radiation exposure.
ALWAYS make sure that any bystanders in the vicinity of
use are made aware of the dangers of looking directly into
the laser tool.
General Safety Rules
500-540
-10-
DO NOT place the laser tool in a position that may cause
anyone to stare into the laser beam intentionally or
unintentionally. Serious eye injury could result.
ALWAYS position the laser tool securely. Damage to the
laser tool and/or serious injury to the user could result if the
laser tool falls.
ALWAYS use only the accessories that are recommended
by the manufacturer of your laser tool. Use of accessories
that have been designed for use with other laser tools could
result in serious injury or unsatisfactory performance.
DO NOT use this laser tool for any purpose other than
those outlined in this manual. This could result in serious
injury or unsatisfactory performance.
DO NOT leave the laser tool “ON” unattended in any
operating mode.
DO NOT disassemble the laser tool. There are no user
serviceable parts inside. Do not modify the product in any
way. Modifying the laser tool may result in hazardous laser
radiation exposure.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
DO NOT operate the laser tool around children or allow children
to operate the laser tool. Serious eye injury could result.
Do not operate the measuring tool in explosive environments,
such as in the presence of flammable liquids, gases or dusts.
Sparks can be created in the measuring tool which may ignite the
dust or fumes.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Nivel láser de Bosch
Bosch
Bosch Professional GLL 2-20 G Manual de usuario
Bosch
Bosch GLL 3-15 Manual de usuario
Bosch
Bosch EasySpiritLevel Manual de usuario
Bosch
Bosch Professional GCL 2-50 Manual de usuario
Bosch
Bosch GTL 3 Professional Manual de usuario
Bosch
Bosch GLL 30 Instrucciones de montaje
Bosch
Bosch GLL50-20 Instrucciones de montaje
Bosch
Bosch PCL 10 Manual de usuario
Bosch
Bosch GLL 2-10 Professional Manual de usuario
Bosch
Bosch BL 2L Professional Manual de usuario
Bosch
Bosch GAM220MF Professional Manual de usuario
Bosch
Bosch GCL 25 Professional Manual de usuario
Bosch
Bosch GPL 5 C Manual de usuario
Bosch
Bosch GPL 3 Professional Manual de usuario
Bosch
Bosch GLL 5-50 X Professional Manual de usuario
Bosch
Bosch Quigo Green Manual de usuario
Bosch
Bosch Quigo Manual de usuario
Bosch
Bosch Professional GLL 50 G Manual de usuario
Bosch
Bosch EasyLevel Manual de usuario
Bosch
Bosch GCL100-40G Instrucciones de montaje
