BG662
8
Default: 10 seconds
Set Clock
Set the cameras date and time. The date
format is month/day/year. The time
format is hour: minute: second.
Time Lapse
The camera can capture images or videos
at a preset time interval regardless of
motion detection. Changing this setting to
a non-zero value turns on Time Lapse
mode and the camera will take photos at
the set interval time – Values range from
5 minutes to a maximum of 8 hours.
If PIR Trigger/Sensitivity and Time
Lapse options are BOTH OFF, the
camera will not capture any photos or
videos.
Default: OFF
PIR
Trigger/
Sensitivity
This setting is for the sensitivity of the
PIR sensor. There are four sensitivity
parameters: High, Normal, Low and Off.
It is recommended to use HIGH
sensitivity in areas with little
environmental interference or warmer,
humid temperatures or climates. Use
LOW sensitivity for areas that have a lot
of interference. The sensitivity of the PIR
is affected by temperature. Higher
temperatures lead to lower sensitivity.
If PIR Trigger/Sensitivity and Time
Lapse options are BOTH OFF, the
camera will not capture any photos or
videos.
