Billy Goat FORCE 601V Manual de usuario

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

Patent #6,253,416 and other patents pending

F601V

BILLY GOAT FORCE BLOWER

Owner's Manual

ACCESSORIES

FRONT AIR DIRECTOR

Simple to attach, allowing air

to be directed forward.

PN# 441130

HOSE KIT

Easily attached hose and

nozzle for hard to reach

places.

PN# 441166

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

CONTENTS

SPECIFICATIONS/ SOUND AND VIBRATION_________________ 3

INSTRUCTION LABELS 4

PACKING CHECKLIST 5

ASSEMBLY 6

OPERATION AND MAINTENANCE __7

TROUBLESHOOTING _ ______________________ _ 8

ILLUSTRATED PARTS LIST __ 9

PARTS LIST 10

Go to http://www.billygoat.com for French-Canadian translations of the product manuals.

Visitez http://www.billygoat.com pour la version canadienne-française des manuels de produits

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

Specifications F601V

Engine: HP

5.5 HP (4.1kW)

Engine: Model

13L132129F8

Engine: Type

B & S VANGUARD

Engine: Fuel Capacity

3.5 qt.(3.3 L)

Engine: Oil Capacity

0.63 qt.(0.60 L)

Total Unit Weight:

89# (40.3 kg)

Overall Length:

43.5"(1.1m)

Overall Width

22” (0.56m)

Overall Height

45" (1.14m)

Max operating slope

20o

In compliance with 2000/14/EEC standards

102dB(a) @3500 rpm

Sound at Operator’s ears

82dB(a) @ 3500 rpm

Vibration at operator position

.46 g (4.51m/s2)

SOUND

SOUND LEVEL 82 Db(a) at Operators Position

102

Sound tests were conducted in accordance with 2000/14/EC, as well as ISO 11094, and were performed on 10-15-

2013 under the conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on

the unit for the sound power level for your model.

VIBRATION DATA

VIBRATION LEVEL .46g (4.51m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using

calibrated vibration test equipment. Tests were performed on 10-15-13 under the conditions listed below.

General Conditions: Sunny

Temperature: 47oF (8.3oC)

Wind Speed: 7 mph (11 kph)

Wind Direction: West

Humidity: 83%

Barometric Pressure: 29.96Hg (101.5kpa)

General Conditions: Sunny

Temperature: 47oF (8.3oC)

Wind Speed: 7 mph (11 kph)

Wind Direction: West

Humidity: 83%

Barometric Pressure: 29.96Hg (101.54kpa)

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ®FORCE Blower. If any labels are damaged or

missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part

numbers are provided for convenience in ordering replacement labels. The correct position for each label may be

determined by referring to the Figure and Item numbers shown.

LABEL READ OWNERS MANUAL LABEL SAFETY PROTECT DANGER FLYING DEBRIS

ITEM #35 P/N890301 ITEM#36 P/N100346 ITEM # 37 P/N 810736

LABEL EXPLOSIVE FUEL

ITEM # 34 P/N 400268

LABEL SPARK ARRESTOR

P/N 100252

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

PACKING CHECKLIST

These items should be included in your carton. If any of these parts are missing, contact your dealer.

Your BILLY GOAT ®FORCE Blower was shipped in one carton, completely assembled except for the Upper Handle

Assembly and Front Diverter. Mounting hardware for the Upper Handle Assembly can be found on the lower

handle.

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box the Handle Assembly is attached to the

unit by cables.

PUT OIL IN ENGINE BEFORE STARTING

Boxing Parts Checklist

Handle Upper Assembly

Item #24 P/N-441157

Parts Bag & Literature Assy

P/N-441248

Vanguard 5.5

PARTS BAG &

LITERATURE ASSY

Warranty card P/N- 400972, Owner’s Manual P/N-441247, General Safety and Warnings Manual P/N-

100294, Declaration of Conformity P/N-441249

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

ASSEMBLY

Figure A Figure B

1.Follow the steps in figures A and B, then securely tighten all hardware shown.

2.Connect spark plug wire.

The hardware for attaching the upper handle to the lower

can be found in the parts bag. Install upper handle (item

24), to preassembled lower handles (item 25 & 26) by

sliding the upper over and down the inside of the lower

handle. Using bolt (item #12), washers (item #10) & lock

nut (item #11) to install upper handle to lower handle.

Finish installing the other side of the upper handle

assembly using screw and lock nut provided. The Aim-

and-ShootTM is not attached, you will need to unroll the

cable and attach the ball end to the lever and seat the

cable end into the hole on the saddle clamp, with the

cable running through the slot. To keep the cable from

being damaged use three ty-wraps (item 61) to secure it

to the handle, as shown making sure that the cable is not

rubbing against the tire.

Attach the front tire using the hardware located on the

front wheel bracket. Use a block to raise the front end of

the unit off the ground. Insert the wheel spacer (item 17)

into the wheel and place in between the bracket. Finally

insert the bolt (item 20) through the bracket, wheel, and

spacer and secure with the nut (item 27)

Two ½” open ended wrenches

Two 9/16” Wrenches

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

PERIODIC MAINTENANCE

Periodic maintenance should be performed at the following intervals:

Maintenance Operation

Every

Use

Daily or Every

5 Hours

Every

100-150

Hours

Inspect for worn or damaged parts.



Check for excessive vibration



Inspect Impeller for cracks or damage



Inspect for loose parts.



IMPELLER REMOVAL

1. Wait for engine to cool and disconnect spark plug.

2. Remove housing front cover, by removing (10) screws, around outside of front cover and the exhaust knob

(22) and nut(14)

3. Remove impeller bolt (item #29), lock washer (item #7) and washer (item #28).

4. DO NOT pry on impeller. Pull on center hub area only of impeller. If impeller slides off freely, proceed to

(step 6).

5. If the impeller does not loosen, use a pry bar against the back of the hub and the plate and apply pressure

to separate the impeller from the shaft. DO NOT use the pry bar to apply pressure to any plastic part such

as the impeller or the main housing. Using a penetrating oil can help loosen a stuck impeller.

6. Reinstall new impeller in reverse order of removal.

7. Tighten impeller bolt. Torque impeller bolt (see parts list on page 10 for proper impeller bolt torque

specifications).

TIRE AIR PRESSURE

Check at regular intervals and maintain.

Rear Tires - 20 Psi (137 kPa).

BLOWING OPERATION

Your Billy Goat Force blower is equipped with an air director cone and the patented Aim-N-Shoot TM control lever to

allow the operator to direct the air stream up or down as required to assist in moving debris. This feature is

extremely useful when debris has piled up to the point that it cannot be blown any farther. The air stream can be

directed upward to blow the top of the debris pile over and allow the operator to continue moving more debris

farther.

ADJUSTING AIR DIRECTOR

To adjust air direction, squeeze Aim-N-ShootTM control lever. When you want to blow debris at the same angle for an

extended period, choose a suitable position and use the finger controlled push button lock to lock the cone in position.

For operations that do not require the use of the Aim-N-ShootTM feature the manual adjustment knob, pictured below, can

be used to permanently lock the cone into position. NOTE: be sure to release the knob when returning to using the Aim-

N-ShootTM.

DO NOT position director cone to where it will blow debris towards people, vehicles or other objects in vicinity. Flying

debris may damage, harm, or cause injury to people or objects in air flow range.

Manual Adjustment

knob

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

TROUBLESHOOTING

Problem Possible Cause Solution

Abnormal vibration. · Loose or out of balance impeller. · Check impeller and replace if required.

· Debris in impeller.

· Clear debris with compressed air or a

backpack blower (see below pictures).*

· Loose engine. · Check engine.

Engine will not start. · Engine not in full choke position. · Check choke position.

· Out of gasoline or bad, old gasoline. · Check gasoline.

· Spark Plug wire disconnected. · Connect spark plug wire.

· Gas valve off. · Turn on gas valve.

· Dirty air cleaner.

· Clean or replace air cleaner. Contact a

qualified service person.

Engine is locked, will not pull

over.

· Engine problem.

· Contact an engine servicing dealer for

engine problems.

Aim-N-Shoot TM lever sticking · Debris stuck around cone · Clean debis

· Cone adjustment knob too tight

· Apply silicone based lubricant to

· Adaptor mount nut (item 43) too

pivot points

tight · Loosen manual adjustment knob

· Loosen nut

*Using compressed air, or a Backpack blower, you

can loosen or free debris easily from the impeller and

housing, which can cause wear and tear on the

machine. You can manually remove debris by taking

off the front housing. Note: Always disconnect the

sparkplug when servicing.

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

ILLUSTRATED PARTS LIST

Part No 441247 Form No F111113A

FORCE 601V BLOWER Owner’s Manual

PARTS LIST

F601V

ITEM NO. DESCRIPTION PART NUMBER QTY.

1 ENGINE 5.5 B&S VANGUARD 441107 1

2 BASE ENGINE WA 441151-S 1

3 SCREW PLASTITE #8-16 X3/4" HWH 441155 10

4 PLATE REINFORCE HOUSING 441102 2

5 HOUSING FRONT MOLDED 441101-1-S 1

6 HOUSING BACK MOLDED 441101-2 1

7 WASHER LOCK 5/16 ST MED 8177011 5

8 SCREW CAP 5/16-24 X1" GR. 5 ZP 400164 4

9 ROD HAND STOP 441154 1

10 WASHER 5/16 FLATWASHER Z/P 8171003 14

11 NYLON INSERT LOCKNUT 5/16-18 8160002 6

12 SCREWCAP 5/16-18 X1.75 ZP 8041031 2

13 SCREW PLASTITE 1/4-10 X3/4 HWH 840082 4

14 NUT LOCK 5/16-18 LT WT TH ZP 8161041 1

15 RING RETAINING 3/4 850230 2

16 WHEEL 8" X0.5 441123 1

17 SPACER FRONT AXLE 441162 1

18 WHEEL ASSY 10" 400295 2

19 FRONT WHEEL BRACKET 441122 1

20 SCREWCAP 3/8-16 X 3 3/4 HCS ZP 8041061 1

21 WASHER W/BOLT WA 441156 1

22 KNOB 5/16-18 X5/8 FLUTED 400339 1

23 WASHER EXTENSION 810652 1

24 HANDLE UPPER 441157-S 1

25 HANDLE LOWER LH 441158 1

26 HANDLE LOWER RH 441159 1

27 NUT LOCK 3/8-16 LT WT THIN ZP 8161042 1

28 WASHER 1.125 OD X0.344 ID X10 GA. 441150 1

29 SCREWCAP 5/16-24 X1 1/2 GR 8 24-28 Ft. lbs. (33-38 N.m.) 830135 1

30 DIRECTOR CONE 3.5" 441120-01 1

31 SCREWCAP 5/16-18 X2 1/2 8041034 4

32 IMPELLER ASSEMBLY 16" 441202-S 1

33 LABEL SPARK ARRESTOR 100252 1

34 LABEL WARNING FUEL EN/SP 100261 1

36 LABEL SAFETY PROTECT READ MANUAL 100346 1

37 LABEL DANGER FLYING DEBRIS 810736 1

38 GRIP 1" ID x 13" 400570 2

39 LABEL LOGO SMALL FRAME 441234 1

40 KEY 3/16" SQ x 1 3/4 9201084 1

43 NUT LOCK 1/4"-20 HEX ZP 8160001 4

44 HANDLE DIVERTER FORCE 440119 1

45 PIN LATCH DIVERTER 440118 1

46 SPRING COMPRESSION 0.281 X0.88 440129 1

47 RING RETAINING .122 DIA 440125 1

48 SADDLE LOWER DIVERTER 440115 1

49 PLATE LOCK DIVERTER 440116 1

50 SCREW PLASTITE #6-19 X5/8" 440132 1

51 SADDLE UPPER DIVERTER 440114 1

52 SCREW PLASTITE #10-14 X1" 440126 2

53 PIN PIVOT DIVERTER CONTROL 440123 1

54 RING RETAINING 5/16 430327 1

55 CABLE ASSY 441163 1

56 DIVERTER PIVOT ADAPTOR 440121 1

57 SPRING EXTENSION 0.468 X5.25 440130 1

58 PIN CLEVIS 1/4 X3/4 440124 1

59 .051 X3/4" HITCH PIN CLIP 440193 1

60 ADAPTOR MOUNT WA 440122 1

61 TY-WRAP 900407 3

62 LABEL VIBRATION WARNING 440191 1

63 FORCE WHEEL BEARING .751 ID 440055 2

64 ELASTIC LOOP BLACK 5.5" 100267 1

65 SCREWCAP 1/4-20 X 1 1/4" HCS ZP 8041007 2

66 FENDER WASHER 5/16 8172020 4

67 WASHER 1/4" SAE 8172007 4

68 SCREWCAP 1/4"-20 1 1/2" HCS ZP 8041008 2

69 SCREWCAP #10-24 X1 1/4" HWH ZP 8059140 1

70 WASHER #10 SAE 8172005 2

71 NUT LOCK LT #10 - 24 HEX 8164005 1

72 NUT LOCK 1/4"-20 2 WAY 8142004 1

75 LABEL MADE IN U.S.A. 520116 1

Tabla de contenidos

Otros manuales de Soplador de Billy Goat

Billy Goat

Billy Goat QUIET BLOW QB1601 Instrucciones de instalación

Billy Goat

Billy Goat EX17D50012 Manual de usuario

Billy Goat

Billy Goat QUIET BLOW QB1004 Instrucciones de instalación

Billy Goat

Billy Goat QUIET BLOW QB1004 Instrucciones de instalación

Billy Goat

Billy Goat F902S Manual de usuario

Billy Goat

Billy Goat F601S Manual de usuario

Billy Goat

Billy Goat QUIET BLOW QB553HC Instrucciones de instalación

Billy Goat

Billy Goat Z FORCE FZ1300H Manual de usuario

Billy Goat

Billy Goat F601S Manual de usuario

Billy Goat

Billy Goat QUIET BLOW QB554HC Instrucciones de instalación

Billy Goat

Billy Goat F601S Manual de usuario

Billy Goat

Billy Goat BLOWER QB882 Instrucciones de instalación

Billy Goat

Billy Goat Z-FORCE BLOWER Manual de usuario

Billy Goat

Billy Goat FORCE 602V Manual de usuario

Billy Goat

Billy Goat QUIET BLOW QB554HC Manual de usuario

Billy Goat

Billy Goat F091907A Manual de usuario

Billy Goat

Billy Goat DL1302H Manual de usuario

Billy Goat

Billy Goat MV VACUUM PUSH EU MV601EU Manual de usuario

Billy Goat

Billy Goat QB883, QB883H, QB1103, QB1103H Instrucciones de instalación

Billy Goat

Billy Goat F1302H Manual de usuario

Billy Goat

Billy Goat F902S Manual de usuario

Billy Goat

Billy Goat Hurricane Z3000 Manual de usuario

Billy Goat

Billy Goat MV650H PUSH Manual de usuario

Billy Goat

Billy Goat F800 Manual de usuario

Manuales populares de Soplador de otras marcas

Weed Eater

Weed Eater VS2000BV Manual de usuario

KRAUSMANN

KRAUSMANN U37020-00 Manual de usuario

Bosch

Bosch ALB 36 LI Manual de usuario

Cub Cadet

Cub Cadet HB425 Manual de usuario

GreenWorks Pro

GreenWorks Pro BLB482 Manual de usuario

ARIETE

ARIETE 2768 Manual de usuario

NuTone

NuTone 331H Manual de usuario

GÜDE

GÜDE GLB 200 18 Li-Ion Manual de usuario

I.VA.CO.

I.VA.CO. SC Series Instrucciones de funcionamiento

DeWalt

DeWalt DCE100 Manual de usuario

Becker

Becker SV 7.330 Manual de usuario

Metabo

Metabo AG 18 Pro Manual de usuario

Desa

Desa GA3650TB Manual de usuario

Echo

Echo Power Blower PB-230LN Manual de usuario

Echo

Echo PB-413H Manual de usuario

Black & Decker

Black & Decker BV3100 Manual de usuario

Ryobi

Ryobi RY08570 Manual de usuario

Haaga

Haaga 355 Manual de usuario