Billy Goat F800 Manual de usuario

Part No 440187 Form No F091907C

FORCE BLOWER 8 Owner’s Manual

Patent Pending

BILLY GOAT FORCE BLOWER

F800

Owner's Manual

Accessories

HOLD DOWN KIT

To secure

blower for

transportation

on trailer floors.

P/N 440120

PARKING BRAKE

Effective and

Easy to use to

revent blower

from rolling.

P/N 440140

FRONT AIR

DIVERTER

Simple to attach,

allowing air to be

directed forward.

P/N 440188

AIM AND SHOOT

Allows up and down

motion via a lever to

easily move debris.

P/N 440128

THROTTLE

CONTROL

Positions throttle

control at a

convenient

location.

P/N 440189

Part No 440187 Form No F091907C

FORCE BLOWER Owner’s Manual

ABOUT THIS MANUAL

THANK YOU for purchasing a BILLY GOAT ®FORCE Blower. Your new machine has been carefully designed and

manufactured to provide years of reliable and productive service. This manual provides complete operating and

maintenance instructions that will help to maintain your FORCE Blower in top running order. Read this manual

carefully before assembling, operating, or servicing your equipment.

CONTENTS

SERIAL PLATE DATA AND SPECIFICATIONS 3

GENERAL SAFETY 4-5

INSTRUCTIONLABELS 6

PACKINGCHECKLIST 7

ASSEMBLY 8

OPERATION 9

MAINTENANCE 10

TROUBLESHOOTING AND WARRANTY PROCEDURE 11

ILLUSTRATED PARTS LIST 12

PARTSLIST 13

MAINTENANCE RECORD 14

Part No 440187 Form No F091907C

FORCE BLOWER 8 Owner’s Manual

SERIAL PLATE DATA

Record the model number, serial number, date of

purchase, and where purchased.

Purchase Date:

Purchased From:

Specifications F800

Engine: HP 8 HP (5.96kW)

Engine: Model 202432-0210-E9

Engine: Type B & S

Engine: Fuel Capacity 4 qt. (3.78L)

Engine: Oil Capacity 28 oz. (0.8L)

Total Unit Weight: 144# (65.3Kg)

Overall Length: 58"(1.43m)

Overall Width 29.25” (0.74m)

Overall Height 45" (1.14m)

Part No 440187 Form No F091907C

FORCE BLOWER Owner’s Manual

GENERAL SAFETY INSTRUCTIONS and SYMBOLS

The safety symbols shown below are used throughout this manual. You should become familiar with them before

assembling, operating, or servicing this equipment.

This symbol indicates important information that will prevent injury to yourself or others.

This symbol indicates ear protection is recommended when operating this equipment.

This symbol indicates eye protection is recommended when operating this equipment.

This symbol indicates gloves should be worn when servicing this equipment.

This symbol indicates that this manual and the engine manufacturer’s manual should be read

carefully before assembling, operation, or servicing this equipment.

This symbol indicates important information that will prevent damage to your BILLY GOAT ®

FORCE Blower.

This symbol indicates the engine oil level should be checked before operating this

equipment.

Read and make sure you thoroughly understand the following safety precautions before assembling, operating or

servicing this equipment:

READ this manual and the engine manufacturer’s manual carefully before assembling,

operating, or servicing this equipment.

EAR PROTECTION is recommended when operating this equipment.

EYE PROTECTION is recommended when operating this equipment.

BREATHING PROTECTION is recommended when operating this equipment.

EXHAUST from this product contains chemicals known to the State of California to cause

cancer, birth defects or other reproductive harm.

DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land

unless a spark arrester is installed on the muffler as required by Section 4442 of the

California Public Resources Code. The arrester must be maintained in good working order.

Other states may have similar laws. Federal laws apply on federal lands.

DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an

odorless and possibly fatal poison.

Part No 440187 Form No F091907C

FORCE BLOWER 8 Owner’s Manual

DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is

recommended.

DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least

two minutes before refueling.

DO NOT store gasoline near an open flame.

DO NOT remove gas cap while engine is running.

DO NOT start or operate engine if strong odor of gasoline is present.

DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until

gasoline has completely evaporated.

DO NOT smoke while filling the fuel tank.

DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark

tester.

DO NOT operate engine without a muffler. Inspect muffler periodically and replace if

necessary. If equipped with muffler deflector, inspect deflector periodically and replace if

necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.

DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may

cause severe burns.

DO NOT leave equipment unattended while in operation.

DO NOT park equipment on a steep grade or slope.

DO NOT operate equipment with bystanders in or near the work area.

DO NOT allow children to operate this equipment.

DO NOT operate equipment with guards removed.

DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.

DO NOT operate equipment on slopes greater than specified in Specifications section of this

manual.

ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting.

ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary.

ALWAYS keep hands and feet away from moving or rotating parts.

ALWAYS store fuel in approved safety containers.

WARNING: Important

Do not run this machine without director cone attached or with improper air director cone.

DO NOT run this machine with a cracked or damaged impeller under any circumstances.

Part No 440187 Form No F091907C

FORCE BLOWER Owner’s Manual

INTENDED USE

This machine is designed for cleaning outdoor surfaces, where the debris can be effectively blown into a

consolidated area for convenient pickup and removal.

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check

for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note:

See parts list for proper impeller bolt torque specifications. (See trouble shooting section on page 12).

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ®FORCE Blower. If any labels are damaged or

missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part

numbers are provided for convenience in ordering replacement labels. The correct position for each label may be

determined by referring to the Figure and Item numbers shown.

LABEL READ OWNERS MANUAL LABEL EAR EYE BREATHING DANGER FLYING DEBRIS

ITEM #44 P/N890301 ITEM# 45 P/N890254 ITEM # 46 P/N 810736

LABEL EXPLOSIVE FUEL

ITEM # 43 P/N 400268

ENGINE LABELS

BRIGGS AND STRATTON

Part No 440187 Form No F091907C

FORCE BLOWER 8 Owner’s Manual

PACKING CHECKLIST

These items should be included in your carton. If any of these parts are missing, contact your dealer.

Your BILLY GOAT ®FORCE Blower was shipped in one carton, completely assembled except for the Upper Handle

Assembly and Front Diverter. Mounting hardware for the Upper Handle Assembly can be found in the parts bag.

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box the Handle Assembly is attached to the

unit by cables.

PUT OIL IN ENGINE BEFORE STARTING

Boxing Parts Checklist

Handle Upper Assembly

Item #49 P/N-440185

Parts Bag & Literature Assy

P/N-440186

B & S Intek 8 hp manual

PARTS BAG &

LITERATURE ASSY

Warranty card P/N- 400972, Owner’s Manual P/N-440187, Handle Hardware-Items #10(washer 8171003),

(

6000

#36(cap

)

Part No 440187 Form No F091907C

FORCE BLOWER Owner’s Manual

ASSEMBLY

Figure A

OPERATION

1.Follow the steps in figures A then securely tighten all hardware shown.

2.Connect s

ark

wire.

Like all mechanical tools, reasonable care must be used when operating machine.

Inspect machine work area and machine before operating. Make sure that all operators of this

equipment are trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING

STARTING

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be

level when checking and filling oil and gasoline.

FUEL VALVE: Move fuel valve to "ON" position (when provided on engine).

STOP SWITCH: Located on the engine. "ON" position.

CHOKE: Operated with choke lever on side of engine.

THROTTLE: Controlled by throttle lever on the engine. Pull starting rope to start engine.

ENGINE SPEED: Under normal conditions, operate at minimum throttle to accomplish your current cleaning task.

IF YOUR UNIT FAILS TO START:

See Troubleshooting on page 12.

The hardware for attaching the upper handle to the lower is in the parts bag. Install upper handle (item 49),

to preassembled lower handle (item 28) by sliding the upper over and down the outside of the lower handle.

Using bolt (item #36), washers (item #10) & lock nut (item #11) to install upper handle to lower handle.

Finish installing the other side of the upper handle assembly using screw and lock nut provided.

Two ½

”

open ended wrenches

Part No 440187 Form No F091907C

FORCE BLOWER 8 Owner’s Manual

HANDLING & TRANSPORTING:

Using two people to lift machine is recommended. Lift holding the handle and handle brace. Secure in place during

transportation. See unit specifications on page 3 for unit weight.

Do not use the front grill as an anchor point when securing the unit for transport.

Never lift the machine while the engine is running.

BLOWING OPERATION

Your Billy Goat Force blower is equipped with an air director cone to allow the operator to direct the air stream up

or down as required to assist in moving debris. This feature is extremely useful when debris has piled up to the

point that it cannot be blown any farther. The air stream can be directed upward to blow the top of the debris pile

over and allow the operator to continue moving more debris farther.

ADJUSTING AIR DIRECTOR

To adjust air direction, first loosen knob and then position air director cone to desired angle. When the cone is at a

suitable position tighten knob to secure. DO NOT position director cone to where it will blow debris towards people,

vehicles or other objects in vicinity. Flying debris may damage, harm, or cause injury to people or objects in air flow

range.

Adjustment knob

Part No 440187 Form No F091907C

FORCE BLOWER Owner’s Manual

MAINTENANCE

PERIODIC MAINTENANCE

Periodic maintenance should be performed at the following intervals:

Maintenance Operation Every

Use

Daily or Every

5 Hours

Every 25

Hours

Every 50

Hours

Every

100-150

Hours

Inspect for worn or damaged parts. z

Check for excessive vibration z

Inspect Impeller for cracks or damage z

Inspect for loose parts. z

IMPELLER REMOVAL

1. Wait for engine to cool and disconnect spark plug.

2. Remove housing front cover, by removing (11) bolts and nuts, items #13 & #14, around outside of front

cover.

3. Remove impeller bolt (item #35), lock washer (item #7) and washer (item #34).

4. DO NOT pry on impeller. Pull on center hub area only of impeller. If impeller slides off freely, proceed to

(step 6).

5. If the impeller does not loosen, obtain a 3/4-16x1” (25.4mm) or longer bolt. Thread bolt by hand into nut

until bolt rests against the shaft. Tighten the bolt slowly, which will pull the impeller away from the shaft,

remove impeller from shaft. Using a penetrating oil can help loosen a stuck impeller.

6. Reinstall new impeller in reverse order of removal.

7. Tighten impeller bolt. Torque impeller bolt (see parts list on page 14 for proper impeller bolt torque

specifications).

TIRE AIR PRESSURE

Check at regular intervals and maintain.

Front Tires - 24 Psi (165 kPa).

Rear Tires - 20 Psi (137 kPa).

STORAGE

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach

an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and

causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Be

sure engine is cool. Do not smoke. Run engine until fuel tank is empty and engine runs out of gasoline.

Fuel stabilizer (such as Sta-Bil TM) is an acceptable alternative for minimizing the formation of gum

deposits during storage. Add stabilizer to gasoline in storage container or fuel tank. Follow

stabilizer manufacturer’s instructions to determine proper mix ratio. Run engine at least 10

minutes after adding stabilizer to allow it to reach carburetor.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Soplador de Billy Goat

Billy Goat

Billy Goat QUIET BLOW QB1100HPN Manual de usuario

Billy Goat

Billy Goat F1002SPV Manual de usuario

Billy Goat

Billy Goat F902S Manual de usuario

Billy Goat

Billy Goat FORCE 602V Manual de usuario

Billy Goat

Billy Goat F601S Manual de usuario

Billy Goat

Billy Goat BLOWER QB882 Instrucciones de instalación

Billy Goat

Billy Goat F902SPS Manual de usuario

Billy Goat

Billy Goat F902S Manual de usuario

Billy Goat

Billy Goat MV VACUUM PUSH EU MV601EU Manual de usuario

Billy Goat

Billy Goat FORCE 601XEU Manual de usuario

Billy Goat

Billy Goat QUIET BLOW QB1004 Instrucciones de instalación

Billy Goat

Billy Goat QB883, QB883H, QB1103, QB1103H Instrucciones de instalación

Billy Goat

Billy Goat F902S Manual de usuario

Billy Goat

Billy Goat QUIET BLOW QB553 Instrucciones de instalación

Billy Goat

Billy Goat FORCE 601V Manual de usuario

Billy Goat

Billy Goat FORCE F601V Manual de usuario

Billy Goat

Billy Goat F1302H Manual de usuario

Billy Goat

Billy Goat QUIET BLOW QB1601 Instrucciones de instalación

Billy Goat

Billy Goat FORCE F601V Manual de usuario

Billy Goat

Billy Goat QUIET BLOW QB554HC Manual de usuario

Billy Goat

Billy Goat F902SPH Manual de usuario

Billy Goat

Billy Goat EX17D50012 Manual de usuario

Billy Goat

Billy Goat KV600SP Manual de usuario

Billy Goat

Billy Goat QUIET BLOW QB551 Manual de usuario

Manuales populares de Soplador de otras marcas

Weed Eater

Weed Eater VS2000BV Manual de usuario

KRAUSMANN

KRAUSMANN U37020-00 Manual de usuario

Bosch

Bosch ALB 36 LI Manual de usuario

Cub Cadet

Cub Cadet HB425 Manual de usuario

GreenWorks Pro

GreenWorks Pro BLB482 Manual de usuario

ARIETE

ARIETE 2768 Manual de usuario

NuTone

NuTone 331H Manual de usuario

GÜDE

GÜDE GLB 200 18 Li-Ion Manual de usuario

I.VA.CO.

I.VA.CO. SC Series Instrucciones de funcionamiento

DeWalt

DeWalt DCE100 Manual de usuario

Becker

Becker SV 7.330 Manual de usuario

Metabo

Metabo AG 18 Pro Manual de usuario

Desa

Desa GA3650TB Manual de usuario

Echo

Echo Power Blower PB-230LN Manual de usuario

Echo

Echo PB-413H Manual de usuario

Black & Decker

Black & Decker BV3100 Manual de usuario

Ryobi

Ryobi RY08570 Manual de usuario

Haaga

Haaga 355 Manual de usuario