Billion BIPAC-6500 Manual de usuario

BIPAC-6500 / 6500W

(Wireless) Broadband VPN Firewall Router

with 4-port 10/100M Switch

Quick Start Guide

Billion BIPAC-6500 / 6500W – (Wireless) Broadband VPN Firewall Router

Package Contents

Billion BIPAC-6500 / 6500W (Wireless) Broadband VPN Firewall Router

CD-ROM containing the online manual

Ethernet (CAT-5 LAN) Cable

AC-DC power adapter (12VDC, 1A)

This Quick Start Guide

One 802.11b (11Mbps) wireless PCMCIAor USB adaptor (optional for 6500W)

One quick start guide for the above wireless adaptor (optional for 6500W)

One CD containing the driver or utility for the above wireless adaptor (optional for 6500W)

 Do not use the BIPAC-6500 / 6500W in high humidity or high

temperatures.

 Do not use the same power source for the BIPAC-6500 / 6500W

as other equipment.

 Do not open or repair the case yourself. If the BIPAC-6500 /

6500W is too hot, turn off the power immediately and have it

repaired at a qualified service center.

Warning

 Place the BIPAC-6500 / 6500W on a stable surface.

 Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

ttention

For more detailed instructions on configuring and using

the (Wireless) Broadband Router, please refer to the on-

line manual.

Quick Start Guide

The Front LEDs

LED Meaning

1 PWR Lit green when power ON

2 SYS Lit when system is ready

3 WLAN (for

6500W only Lit green when wireless connection is established.

Flashes when sending/receiving data.

LAN1

LAN2

LAN3

LAN4

Lit green when connected at 100 Mbps.

Lit orange when connected at 10 Mbps.

Flashes when sending/receiving data.

5 WAN

Lit green when connected at 100 Mbps.

Lit orange when connected at 10 Mbps.

Flashes when sending/receiving data.

6 PPP / MAIL Lit green when PPPoE or PPTP connection is established.

Lit orange when there is email in the email account

Flashes orange when upgrading firmware.

Billion BIPAC-6500 / 6500W – (Wireless) Broadband VPN Firewall Router

The Rear Ports

5 3 1

4 2

Port Meaning

1 Power Switch Power ON/OFF switch

2 PWR Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

0-3 seconds: reset the device

3-6 seconds: no action

6 seconds above: restore to factory default settings (this is used

when you can not login to the router, e.g. forgot the password)

4 LAN

(RJ-45 connector) Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the

four LAN ports when connecting to a PC or an office/home

network of 10Mbps or 100Mbps.

5 WAN

(RJ-45 connector)

Connect an UTP Ethernet cable to this port when connecting to

a hub.

Connect a crossover cable to this port when connecting to a

DSL/Cable bridge or modem for establishing WAN connections.

＊Only the BIPAC-6500W has a wireless interface and antenna. BIPAC-

6500 router does NOT have an antenna or wireless interface.

Quick Start Guide

Connecting Your Broadband Router

 6500

 6500W

1. Connect the Router to a LAN (Local Area Network) and theADSL/telephone (WAN) network.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.

(For 6500W only: the WLAN LED will be lit steadily).

＊Be noted, the router provides a 10/100Mbps Ethernet port (10Base-T)

in the WAN site, it will not detect MDI and MDIX automatically. Therefore,

an Ethernet cross-over cable should be used to connect to DSL/CABLE

modem.

Billion BIPAC-6500 / 6500W – (Wireless) Broadband VPN Firewall Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

Dial-up Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status window

click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Billion BIPAC-6500 / 6500W – (Wireless) Broadband VPN Firewall Router

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and click

OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

choose the Protocols tab.

2. Select TCP/IP Protocol and click Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador inalámbrico de Billion

Billion

Billion BiPAC 7500G Manual de usuario

Billion

Billion BiPAC 6200NXL Manual de usuario

Billion

Billion BiPAC 7800DXL Manual de usuario

Billion

Billion BiPAC 6300NX Manual de usuario

Billion

Billion BiPAC 7300NX Manual de usuario

Billion

Billion BiPAC 5400W Manual de instalación y operación

Billion

Billion BiPAC 7404VGO Manual de usuario

Billion

Billion BiPAC 7300GX Manual de usuario

Billion

Billion BiPAC 6200WZL R2 Manual de usuario

Billion

Billion BIPAC-840 Manual del propietario

Billion

Billion BiPAC 7800X Manual de usuario

Billion

Billion BiPAC 7800VDPX Manual de instalación y operación

Billion

Billion BiPAC 6404VGP Manual de usuario

Billion

Billion BiPAC 7800NX Manual del propietario

Billion

Billion 7800VDP(O)X Manual de usuario

Billion

Billion BIPAC 6500 Manual de usuario

Billion

Billion BIPAC 6500W Manual de usuario

Billion

Billion BiPAC 6300VNOZ Manual de usuario

Billion

Billion BIPAC-7402W Manual de usuario

Billion

Billion BIPAC 7100G Manual de usuario

Billion

Billion BiPAC 7300GX Manual de usuario

Billion

Billion 7800VDP(O)X Manual de usuario

Billion

Billion BiPAC 7800NL Manual de usuario

Billion

Billion 7800DX Manual de usuario

Manuales populares de Enrutador inalámbrico de otras marcas

Milesight

Milesight UG67 Manual de usuario

Airlogic

Airlogic AirSync Class 1 Manual del propietario

Samsung

Samsung WCH730B Manual de usuario

TELEFONICA

TELEFONICA USB Adapter Manual de usuario

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manual de usuario

Askey

Askey RAC2V1K Manual de usuario

Alloy

Alloy WLF2454AP-S Manual de usuario

TP-Link

TP-Link TL-WR542G Manual de usuario

NETGEAR

NETGEAR WNR2000v4 Manual de usuario

Hama

Hama 53120 Manual de usuario

Intellinet

Intellinet 524582 Manual de usuario

Asus

Asus RT-N10P Manual de usuario

D-Link

D-Link DIR-506L Manual de usuario

Sapido

Sapido GR297n Manual de usuario

Asus

Asus DSL-N55U Manual de usuario

AMTC

AMTC WR7502 Manual de usuario

Compaq

Compaq CP-2W - iPAQ Connection Point Manual de usuario

SMC Networks

SMC Networks WBR14-N2 FICHE Manual de usuario