Billion BiPAC 8501 Manual de usuario

BiPAC 8501

SHDSL.bis VPN Firewall Bridge/Router

Quick Start Guide

SHDSL.bis VPN Firewall Bridge/Router

For more detailed instructions on con

urin

and usin

Billion SHDSL.bis VPN Firewall Bridge/Router, please re

er to

the on-line manual.

Package Contents

SHDSL.bis VPN Firewall Bridge/Router

CD-ROM containing the online manual

RJ-11 SHDSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

Console (PS2-RS232) Cable

AC-DC power adapter (12VDC, 1A)

This Quick Start Guide

 Do not use this router in high humidity or high temperatures.

 Do not use the same power source for this router as othe

equipment.

 Do not open or repair the case yourself. If this router is too hot,

turn off the power immediately and have it repaired at a qualified

service center.

Warning  Avoid using this product and all accessories outdoors.

 Place this router on a stable surface.

 Only use th

differ e power adapter that comes with the package. Using a

ent voltage rating power adaptor may damage this router.

ttention

Quick Start Guide

The Front LEDs

LED Meaning

1 PWR Lit when power is ON.

2 SYS Lit when the system is ready.

3 Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

LAN Port

1X — 4X

(RJ-45 connector) Blinking when data is Transmitted / Received.

4 LINE Lit when successfully connected to SHDSL line and it is

synchronized.

SHDSL.bis VPN Firewall Bridge/Router

The Rear Ports

5 1

6 2

Port Meaning

1 Power Switch Power ON/OFF switch

2 PWR Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the

device or restore to factory default settings.

1-3 seconds: reset the device

6 seconds above, and power off, power on the device:

restore to factory default settings (this is used when you

can not login to the router, e.g. forgot the password)

4 LAN

1X — 4X

(RJ-45 connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of

the four LAN ports when connecting to a PC or an

office/home network of 10Mbps or 100Mbps.

5 CONSOLE Connect a PS2/RS-232 cable to this port when

connecting to a PC’s RS-232 port (9-pin serial port).

6 LINE Connect the supplied RJ-11 (“telephone”) cable to this

port when connecting to the A SHDSL line.

Quick Start Guide

Connecting Your SHDSL Bridge/Router

1. Connect the Router to a LAN (Local Area Network) and the SHDSL LINE.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN and LINE LED

are lit.

SHDSL.bis VPN Firewall Bridge/Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

Dial-up Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

SHDSL.bis VPN Firewall Bridge/Router

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and

click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

choose the Protocols tab.

2. Select TCP/IP Protocol and click Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

Otros manuales para BiPAC 8501

Tabla de contenidos

Otros manuales de Enrutador de red de Billion

Billion

Billion BiPAC 7202 Manual de usuario

Billion

Billion BIPAC 7500 Manual de usuario

Billion

Billion BiPAC 5100S Manual de usuario

Billion

Billion BiPAC 7402NX Manual de usuario

Billion

Billion BIPAC-7402 Manual de usuario

Billion

Billion BiPAC 8700AX-1600 Manual de usuario

Billion

Billion BiPAC 5210S Manual de usuario

Billion

Billion BiPAC 710C2 Manual de usuario

Billion

Billion BiPAC 7402VGO Manual de usuario

Billion

Billion BiPAC 8800NL R2 Guía de configuración

Billion

Billion BiPAC 7800GZ Manual de usuario

Billion

Billion BiPAC 7404V series Manual de usuario

Billion

Billion BiPAC 5100S Manual de usuario

Billion

Billion BIPAC 7402W Manual de usuario

Billion

Billion BiPAC 7402G Manual de usuario

Billion

Billion BiPAC 7401V(G)P R4 Manual de usuario

Billion

Billion BiPAC 7401V(G)P R4 Manual de usuario

Billion

Billion BiPAC 8700VAX(L)-1600 Manual de usuario

Billion

Billion BiPAC 6404VGP R3 Manual de usuario

Billion

Billion BiPAC 5400SW Manual de instalación y operación

Billion

Billion BiPAC 5210G RC Manual de usuario

Billion

Billion BiPAC 4700ZUL Manual de usuario

Billion

Billion myGuard 7500GL Manual de usuario

Billion

Billion BiPAC 7300G RA Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario