Billion Bipac 74 Series Manual de usuario

Otros manuales de Enrutador de red de Billion

Billion

Billion BiPAC 5200W Manual de usuario

Billion

Billion BiPAC 5200S RC Series Manual de usuario

Billion

Billion BiPAC 7402NX Manual de usuario

Billion

Billion BIPAC- 8500 Manual de usuario

Billion

Billion BiPAC 7800(N)X(L) Manual de usuario

Billion

Billion BiPAC 5200N Manual de usuario

Billion

Billion ADSL Modem / Router BIPAC-711C2 Manual de usuario

Billion

Billion BiPAC 7401VGP Manual de usuario

Billion

Billion BiPAC 5100 Manual de usuario

Billion

Billion BiPAC 7700N Manual de usuario

Billion

Billion BiPAC 7404VNOX Manual de usuario

Billion

Billion BiPAC 7300VGP Manual de usuario

Billion

Billion myguard 6700G Manual de usuario

Billion

Billion BiPAC 710C2 Manual de usuario

Billion

Billion Modem/Router ADSL BIPAC-7100S Manual de usuario

Billion

Billion myGuard 7500GL Manual de usuario

Billion

Billion BiPAC 5210S Manual de usuario

Billion

Billion BiPAC 7100 Manual de usuario

Billion

Billion BiPAC 7401VP Manual de usuario

Billion

Billion BiPAC 8800NL R2 Guía de configuración

Billion

Billion BiPAC 7401V(G)P R4 Manual de usuario

Billion

Billion BiPAC 7300NX Manual de usuario

Billion

Billion BiPAC 7300 RA Manual de usuario

Billion

Billion BiPAC 7300M Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario

Instructions on how to capture logs from Bipac 74xx.

1. Please turn off your Bipac 74xx.

2. Unplug the USB dongle from your router.

3. Plug the serial (RS232) 9 pins connecter to Ethernet converter to the computer’s

RS232 serial port.

4. Connect up an Ethernet cable (RJ45) from the RS232 to Ethernet converter to the

74xx LAN port 4, then insert a second RJ45 cable into the computer’s LAN port and

the other end of the RJ45 cable to LAN port 1 on the 74xx.

Go to your computer then start Hyper Terminal program in windows.

Enter test and pick any icon and click on “OK”. The next page will load and look like

this.

Please select “COM1” and click on “OK”

On the Bits per second please select “9600” as shown above. Also please select

“None” on the Flow control and click on “OK”.

You should now have this page.

Please now turn on your device without the usb connected.

You should see the following messages.

Please wait for a while as the unit fully boots up. Once it has failed to detect the USB

dongle you will see this page.

If you are prompted to enter the username and password before the detection of the

USB dongle please enter the default username “admin” and the password “admin”.

If not then the page will look the same as above.

Enter your username as “admin” and the password “admin”

Once you are logged in your will get the message “Login Successful”, as shown

below.

The cursor should be flashing next to admin as shown above.

Then type “system trace enable usb_host debug” then press enter

Then type “console enable” then press enter

Then type “event show” then press enter

After typing those commands your page should look like this.

Now please plug in your USB dongle into your device.

The following logs will start to appear.

Please wait around 3 minutes.

Once three minutes are passed, please click on file, save as, and save the file to a

location.

Please run this test three times and capture all three logs for us and send them back to

us.

Thanks once again for helping capture these results.