Billion BiPAC 7402X Series Manual de usuario

BiPAC 7402X(L),

7402GX(L), 7402NX,

7402VNOX

ADSL2/2+ Modem/Routers with 3G back-up

QoS VPN Firewall Wired/Wireless

Multi-Port Switching Hub

UK Quick Install Guide

LThis guide covers only the initial

Internet set-up. Please refer to

the full User Manual on the CD-

ROM for more advanced

settings. This guide is based on

the Billion BiPAC 7402GX

3G/ADSL2+ VPN Firewall

Modem/Router. Screen shots in

this guide may vary slightly from

the actual router.

www.billion.uk.com

This symbol on the product or in the instructions means that your electrical and electronic

equipment should be disposed at the end of its life separately from your household waste.

There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased

the product.

QUICK INSTALL GUIDE

Billion 7402X/GX 3G/ADSL2+ VPN Firewall Modem/Router Set Up

The Billion 7402X/GX 3G/ADSL2/2+ VPN Firewall Modem/Router has a Dual

WAN interface for use with fixed line ADSL services or mobile 3G services.

You can set up the router with:

1. ADSL as the primary WAN interface with 3G as a back-up (Autofailover

mode) or,

2. You can set 3G as the primary WAN interface to create a portable

hotspot, for instance at an exhibition, road show, field trip etc.

This installation guide will take you through the process of initial configuration of

your ADSL settings with 3G as a back-up (see sections 2.1 and 2.3). Once you have

configured your ADSL and 3G settings you can then change the primary WAN

interface to 3G for use as a stand alone 3G router or portable hotspot mode (see

section 2.4).

1.1 Starting out:

Before you can establish an Internet connection through your Billion 7402X/GX

Modem/Router make sure you have the following:

1. A Computer or Notebook with an installed Network Adaptor (sometimes called

an Ethernet Adaptor, Network Card or NIC)

2. An ADSL or DSL service account and configuration information provided by

your Internet Service Provider (ISP). You should need only a User Name and

Password, but you can check with your ISP to see if you require any of the

other following configuration parameters to connect your Billion 7402X/GX

Modem/Router to the Internet :

a. ISP User Name and Password

b. VPI/VCI parameters

c. Multiplexing Method

d. Host and Domain Names

e. ISP Domain Name Server ( DNS ) Address

f. Fixed or Static IPAddress.

3. A compatible 3G USB dongle or USB stick for 3G connectivity with SIM card

(see www.billion.uk.com/compatible-3G.htm for a full list of compatible cards)

from your mobile service provider.

4. Username and Password and APN from your mobile service provider.

1.2 Steps for Connection:

The following are the steps to properly connect your Billion 7402X/GX

Modem/Router:

1. Turn off your computer.

2. If you do not have an ADSL faceplate installed by your service provider, you

must ensure ADSL splitters (also called microfilters or filters) are fitted to all

telephone sockets in use.

3. Connect the supplied ADSL (RJ-11) cable from the splitter/filter of your chosen

telephone socket (or ADSL faceplate if you have one) to the DSL Port of your

Billion 7402X/GX Modem/Router.

4. Connect the yellow Ethernet cable (RJ-45) from one of the Ethernet ports of your

Billion 7402X/GX Modem/Router to the Network Adaptor in your computer.

5. Connect the Power adaptor to the Billion 7402X/GX Modem/Router and plug the

other end into a Power outlet. Power up the unit.

6. Turn on your computer. Please allow up to 45 seconds for your Network Adaptor

to locate the Router. Please wait for the DSL light on the front of the router to turn

to solid – this may take up to 1-2 mins (see 3.1 Troubleshooting the ADSL

connection).

7. You are now ready to configure your ADSL and Wireless connection for the

Billion 7402X/GX Modem/Router. All you need to do is to follow the instructions

that follow and enter your User Name and Password as supplied by your Service

Provider. No other changes should be necessary.

2.1 ADSL and Wireless Configuration:

1. Open Internet Explorer or your default web browser and type in

http://192.168.1.254 in the address bar (where you would normally enter the

web site address) as per the illustration below.

2. You will be presented with a user name and password prompt.* Simply enter

user name as admin, password as admin and click OK. This will take you to

the modem’s Status page.

* If the user name and password prompt box does not appear make sure that any

firewall or anti-virus such as Trend Micro or Norton is disabled. Also ensure that your

Internet settings are correct. (In Internet Explorer go to Tools/Internet

Options/Connections and make sure “Never dial a Connection” is checked. Then

Click on the LAN settings and ensure “Automatically detect settings” is checked and

all other fields are blank. Then go to Tools/Internet Options/Security and return your

Security settings to “default”. )

3. From the Menu on the left select Quick Start.

4. Ensure the Connect Mode is ADSL and click on Continue. (if you are using

the router in 3G mode only, you can Jump to Wireless settings and set up

your wireless security as outlined overleaf)

5. Enter your Username and Password as supplied by your Internet Service

Provider in the relevant fields, and click Apply.

6. From the drop down menu in the Security Mode field you can choose your

preferred wireless security (or keep the wireless security disabled.) Please ensure

your wireless adaptor or laptop is compatible with your chosen security mode.

7. For WPA you should enter an alphanumeric password (numbers and letters) of

between 8 and 64 characters in the WPA Shared Key field and click Apply.

8. Please wait while the router applies the new settings.

9. This completes the ADSL and wireless security configuration.

10. You should now be connected to the Internet. You can check your connection

on the Status page by selecting Status from the menu on the left-hand side.

11. You are now ready to set up your 3G connection.

2.2 Setting up your 3G connection:

You can configure your 3G connection to act as a backup (Autofailover mode),

or as your primary connection. In Autofailover mode the router is designed to

automatically failover to 3G should your ADSL line go down, and automatically

revert back to ADSL (failback) when your line is reconnected.

Please insert your 3G USB dongle or USB stick with SIM firmly into the

USB port in the back of the router.

N.B. For setting up the router in 3G mode only, please go to section 2.4.

now.

2.3 Configuration of your 3G connection in Autofailover mode:

1. From Status page, select Advanced>Configuration>WAN>WAN Interface.

Otros manuales para BiPAC 7402X Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de Billion

Billion

Billion BiPAC 7800 Manual de usuario

Billion

Billion (802.11g) ADSL2+ Modem/Router BIPAC 5102G Manual de usuario

Billion

Billion BiPAC 711C2 Manual de usuario

Billion

Billion BiPAC 7402R2 Manual de usuario

Billion

Billion BiPAC 7401VGP Manual de usuario

Billion

Billion BiPAC 7300G Manual de usuario

Billion

Billion BiPAC 5200S Series Manual de usuario

Billion

Billion BIPAC 6600 Manual de usuario

Billion

Billion BiPAC 7800GZ Manual de usuario

Billion

Billion BiPAC 8900AX-1600 R2 Manual de usuario

Billion

Billion BiPAC 8500 Manual de usuario

Billion

Billion BIPAC 7402W Manual de usuario

Billion

Billion BiPAC 7402(G)X(L) Series Manual de usuario

Billion

Billion BiPAC 8501 Manual de usuario

Billion

Billion BiPAC 5200G Series Manual de usuario

Billion

Billion BiPAC 5200W-T R2 Manual de usuario

Billion

Billion BiPAC 5200N Manual de usuario

Billion

Billion 400G Instrucciones de uso

Billion

Billion BiPAC 7800 Manual de usuario

Billion

Billion BiPAC 7404VGP Manual de usuario

Billion

Billion BiPAC 5210S Manual de usuario

Billion

Billion BiPAC 7300 G Manual de usuario

Billion

Billion Router Manual de usuario

Billion

Billion BiPAC 7800(N) Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario