Billion BiPAC 7300N Manual de usuario

BiPAC 7300N

ADSL2/2+ Broadband Modem/Router

QoS Firewall Wireless N Draft 2

Multi-Port Switching Hub

Quick Install Guide

LThis guide covers only the initial

Internet set-up. Please refer to

the full User Manual on the CD-

ROM for more advanced

settings. This guide is based on

the Billion BiPAC 7300N Draft 2

ADSL2+ Wireless

Modem/Router. Screen shots in

this guide may vary slightly from

the actual router.

www.billion.uk.com

This symbol on the product or in the instructions means that your electrical and electronic

equipment should be disposed at the end of its life separately from your household waste.

There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased

the product.

QUICK INSTALL GUIDE

Billion 7300N Draft 2 ADSL2+ Wireless Modem/Router Installation

1.1 Starting out:

Before you can establish an Internet connection through your Billion 7300N Modem/Router

make sure you have the following:

1. A Computer or Notebook with an installed Network Adaptor (sometimes called an

Ethernet Adaptor, Network Card or NIC)

2. An ADSL or DSL service account and configuration information provided by your

Internet Service Provider (ISP), or an existing cable modem. You should need only a

User Name and Password, but you can check with your ISP to see if you require any

of the other following configuration parameters to connect your Billion 7300N

Modem/Router to the Internet :

a. ISP User Name and Password

b. VPI/VCI parameters

c. Multiplexing Method

d. Host and Domain Names

e. ISP Domain Name Server ( DNS ) Address

f. Fixed or Static IPAddress.

1.2 Steps for Connection:

The following are the steps to properly connect your Billion 7300N Modem/Router. N.B. For

configuration as a broadband router go to steps 4 and 5 and then jump to section 2.1.

1. Turn off your computer.

2. If you do not have an ADSL faceplate installed by your service provider, you must ensure

ADSL splitters (also called microfilters or filters) are fitted to all telephone sockets in use.

3. Connect the supplied ADSL (RJ-11) cable from the splitter/filter of your chosen telephone

socket (or ADSL faceplate if you have one) to the DSL Port of your Billion 7300N

Modem/Router.

4. Connect the yellow Ethernet cable (RJ-45) from one of the Ethernet ports of your Billion

7300N Modem/Router to the Network Adaptor in your computer.

5. Connect the Power adaptor to the Billion 7300N Modem/Router and plug the other end

into a Power outlet. Power up the unit.

6. Turn on your computer. Please allow up to 45 seconds for your Network Adaptor to locate

the Router. Please wait for the DSL light on the front of the router to turn to solid – this

may take up to 1-2 mins (see 3.1 Troubleshooting the connection).

7. You are now ready to configure your ADSL/Broadband and Wireless connection for the

Billion 7300N Modem/Router. All you need to do is to follow the instructions that follow

and enter your User Name and Password as supplied by your Service Provider. No other

changes should be necessary.

2.1 ADSL/Broadband and Wireless Configuration:

1. Open Internet Explorer or your default web browser and type in http://192.168.1.254

in the address bar (where you would normally enter the web site address) as per the

illustration below.

2. You will be presented with a user name and password prompt.* Simply enter user

name as admin, password as admin and click OK. This will take you to the modem’s

Status page. N.B. For configuration as a broadband router go to section 2.2 now.

* If the user name and password prompt box does not appear make sure

that any firewall or anti-virus such as Trend Micro or Norton is disabled.

Also ensure that your Internet settings are correct. (In Internet Explorer go

to Tools/Internet Options/Connections and make sure “Never dial a

Connection” is checked. Then Click on the LAN settings and ensure

“Automatically detect settings” is checked and all other fields are blank.

Then go to Tools/Internet Options/Security and return your Security

settings to “default”. )

3. From the Menu on the left select Quick Start.

4. Ensure the Connect Mode is ADSL (Recommended) and click on Continue.

5. Enter your Username and Password as supplied by your Internet Service Provider in

the relevant fields, and click on Continue.

6. Please wait while the router applies the new settings.

7. Now click on Next to Wireless. N.B. If you do not go through the wireless setup on

the Wizard, then you must click Save Config at the bottom of the page and then click

Apply settings to save your username and password to Flash.

8. From the drop down menu in the Security Mode field you can choose your preferred

wireless security (or keep the wireless security disabled.) Please ensure your wireless

adaptor or laptop is compatible with your chosen security mode.

9. For WPA you should enter an alphanumeric password (numbers and letters) of between

8 and 64 characters in the WPA Shared Key field and click Continue.

10. Please wait while the router applies the new settings.

11. This completes the wireless security configuration.

12. You should now be connected to the Internet. You can check your connection on the

Status page by selecting Status from the menu on the left-hand side.

13. For advance configuration please access the manual on the CD provided.

2.2 Broadband Router configuration (optional):

The Ethernet Port 1 of the BiPAC 7300N at the back of the router can be configured as a

WAN interface for connecting to an external broadband modem.

N.B. Please note only Port 1 can be configured as a WAN interface.

1. From the main screen, click on the Advanced tab on the left hand side.

2. Click the Configuration tab on the left hand side and then the WAN Profile tab.

The page should look like this:

Otros manuales para BiPAC 7300N

Tabla de contenidos

Otros manuales de Enrutador de red de Billion

Billion

Billion BIPAC-645 Manual de usuario

Billion

Billion BiPAC 8200N Manual de usuario

Billion

Billion BiPAC 711C2 Manual de usuario

Billion

Billion BiPAC 7300M Manual de usuario

Billion

Billion BiPAC 7401V(G)P R4 Manual de usuario

Billion

Billion BiPAC 5200S RC Series Manual de usuario

Billion

Billion BiPAC 7404V series Manual de usuario

Billion

Billion BiPAC 9800 Manual de usuario

Billion

Billion BiPAC 7401VP Manual de usuario

Billion

Billion BiPAC 5210S Manual de usuario

Billion

Billion BiPAC 5200W Manual de usuario

Billion

Billion BiPAC 7404VGOX Manual de usuario

Billion

Billion BiPAC 7402X Series Manual de usuario

Billion

Billion BiPAC 8800NL Manual de usuario

Billion

Billion BIPAC 7402W Manual de usuario

Billion

Billion M500 Manual de usuario

Billion

Billion BiPAC 4700ZUL Manual de usuario

Billion

Billion myGuard 7202 Manual de usuario

Billion

Billion BiPAC 7560G Manual de usuario

Billion

Billion BiPAC 7402NXL Manual de usuario

Billion

Billion BiPAC 7402VGO Manual de usuario

Billion

Billion BiPAC 710C2 Manual de usuario

Billion

Billion BiPAC 7700N Manual de usuario

Billion

Billion myGuard 7202 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario