Billion BiPAC 7202 Manual de usuario

BiPAC 7202 / 7202GR2

(802.11g) ADSL2+ Router

Quick Start Gui e

Billion BiPAC 7202 / 7202GR2 ADSL2+Router

Package Contents

BiPAC 7202 series ADSL2+ Router

CD-ROM containing the on-line manual

R -11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

AC-DC power adapter (12VDC, 1A)

This Quick Start Guide





 Do not use the router in high humidity or high temperatures.





 Do not use the same power source for the router as other

equipment.





 Do not open or repair the case yourself. If the router are too hot,

turn off the power immediately and have it repaired at a qualified

service center.





 Avoid using this product and all accessories outdoors.

Warning





 Place the router on a stable surface.







Only use the power adapter that comes with the package. Using

a different voltage rating power adaptor may damage the router.

Attention

For more detailed instructions on configuring and using the

(802.11g) ADSL2+ Router, please refer to the on-line

anual.

Quick Start Gui e

The Front LEDs

BiPAC 7202

BiPAC 7202GR2

LED Meaning

1 PPP :

Lit steady when there is a PPPoA / PPPoE connection.

2 ADSL:

Lit when successfully connected to an ADSL DSLAM (“linesync”).

3 LAN Port:

Lit when connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

WLAN :

(7202GR2

only)

Lit green when the wireless connection is established.

Flashes when sending/receiving data.

5 SYS :

Lit when the system is ready.

6 PWR :

Lit when power is ON.

Billion BiPAC 7202 / 7202GR2 ADSL2+Router

The Rear Ports

BiPAC 7202

BiPAC 7202GR2

Port Meaning

1 Power Switch

Power ON/OFF switch

2 PWR Connect the supplied power adapter to this jack.

RESET

(

Emergency/Fai

lure Recovery)

1. After the device is powered on, press it to perform Failure

recover for a dead routers:

Simply hold the Emergency/Failure Recovery Button” when power

on the routers and download the Application if necessary.

2. perform the Emergency Recover for the missing Password

case:(Using LEDs indications)

Simply hold the Emergency/Failure Recovery Button, when router

can be accessed from GUI, until the LEDs all turn Off, turn On and

then Turn Off. Then, router will perform configuration factory reset

and router reboot

LAN

(RJ-45

connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four

LAN ports when connecting to a PC or an office/home network of

10Mbps or 100Mbps.

ADSL

(LINE)

Connect the supplied R -11 (“telephone”) cable to this port when

connecting to the ADSL/telephone network.

Quick Start Gui e

Connecting BiPAC 7202

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR an SYS LEDs are lit steadily and that the relevant LAN LED is lit.

Billion BiPAC 7202 / 7202GR2 ADSL2+Router

Connecting BiPAC 7202GR2

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR, SYS, an WLAN LEDs are lit steadily and that the relevant LAN LED is

lit.

Quick Start Gui e

Configuring PC in Win ows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP a ress

automatically and the Obtain DNS server

a ress automatically radio buttons.

6. Click OK to finish the configuration.

Billion BiPAC 7202 / 7202GR2 ADSL2+Router

Configuring PC in Win ows 2000

Go to Start / Settings / Control Panel. In the Control

Panel, double-click on Network an Dial-up

Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP a ress

automatically and the Obtain DNS server

a ress automatically radio buttons.

6. Click OK to finish the configuration.

Configuring PC in Win ows 98/Me

Quick Start Gui e

1. Go to Start / Settings / Control Panel. In

the Control Panel, double-click on Network

and choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP a ress

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and

click OK to finish the configuration.

Configuring PC in Win ows NT4.0

Otros manuales para BiPAC 7202

Este manual sirve para los siguientes modelos

Otros manuales de Enrutador de red de Billion

Billion

Billion BiPAC 7202 Manual de usuario

Billion

Billion BEC MX-1000 Manual de usuario

Billion

Billion BiPAC 7800GZ(L) Manual de usuario

Billion

Billion BiPAC 711C2 Manual de usuario

Billion

Billion BiPAC 7100SG Manual de usuario

Billion

Billion BiPAC 7300 Manual de usuario

Billion

Billion Bipac 74 Series Manual de usuario

Billion

Billion BiPAC 7300N Manual de usuario

Billion

Billion BiPAC 7402(G)X(L) Series Manual de usuario

Billion

Billion BiPAC 9800 Manual de usuario

Billion

Billion BiPAC 7202 Manual de usuario

Billion

Billion myGuard 7500GL Manual de usuario

Billion

Billion BIPAC 6600 Manual de usuario

Billion

Billion Modem/Router ADSL BIPAC-7100S Manual de usuario

Billion

Billion BiPAC 5100S Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

Billion

Billion myGuard 7202 Manual de usuario

Billion

Billion BiPAC 7402G Manual de usuario

Billion

Billion BiPAC 8501 Manual de usuario

Billion

Billion BiPAC 7404VNOX Manual de usuario

Billion

Billion BiPAC 7402VGO Manual de usuario

Billion

Billion BiPAC 7402R2 Manual de usuario

Billion

Billion BiPAC 7402VL Manual de usuario

Billion

Billion BiPAC 7800GZ Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

LevelOne

LevelOne FBR-1416 Manual de usuario