Belkin F1DA208Z Manual de usuario

OmniView®PRO3

Dual-User KVM Switch

User Manual

F1DA208Z

F1DA216Z

Table of Contents

Introduction.................................................................................................. 1

Package Contents .............................................................................. 1

Overview ...................................................................................................... 2

Feature Overview ................................................................................ 2

Equipment Requirements .................................................................... 3

System Requirements ......................................................................... 4

Unit Display Diagrams ........................................................................ 5

Speciﬁcations ........................................................................................... 6

Installation................................................................................................... 7

Pre-Conﬁguration...................................................................................... 7

Mounting the PRO3 KVM Switch ........................................................ 8

Connecting the Console to the PRO3 KVM Switch .............................9

Connecting Servers to the PRO3 KVM Switch .................................. 11

Connecting Multiple PRO3 KVM Switches (Daisy-Chaining).............. 15

Powering Up the Systems ................................................................ 19

Using your PRO3 KVM Switch ................................................................20

Selecting a Server or BANK Using Hot-Key Commands ................... 20

AutoScan Mode ................................................................................ 22

On-Screen Display (OSD) .................................................................. 22

Keyboard Hot-Key-Command Shortcuts........................................... 28

Sun Combo and Mac Key Mapping.................................................. 29

Updating Firmware............................................................................ 30

Frequently Asked Questions ..................................................................31

Troubleshooting ..........................................................................................33

Glossary ......................................................................................................36

Information .................................................................................................38

Introduction

Congratulations on your purchase

of this Belkin OmniView PRO3

Dual-User KVM Switch (the KVM

Switch). Our diverse line of KVM

solutionsexempliﬁes the Belkin commitment

to delivering high-quality, durable products at an affordable price.

Belkin has designed and developed this KVM Switch with the server

administrator in mind. The result is a KVM Switch that surpasses any other

switch on the market. The PRO3 KVM Switch is engineered to work with the

most advanced server-room and laboratory environments, offering intuitive port

indicators, high video resolution support, and ﬂash-upgradeable ﬁrmware.

PRO3 KVM Switches can be daisy-chained together easily to enable

management of up to 256 PS/2 and/or USB servers from a single console. The

PRO3 KVM Switch also comes with an unparalleled Belkin 3-Year Warranty.

This User Manual will provide details about your new PRO3 KVM Switch,

from installation and operation to troubleshooting—in the unlikely event of a

problem. For quick and easy installation, please refer to the Quick Installation

Guide included in your PRO3 KVM Switch packaging.

Thank you for purchasing the Belkin OmniView PRO3 Dual-User KVM Switch.

We appreciate your business and have conﬁdence that you will soon

see for yourself why Belkin is the number-one-selling brand in KVM

switches worldwide.

Rack-Mount

Brackets with

Screws

DB9-to-RJ11

Serial Flash

Cable

OmniView PRO3

Dual-User

KVM Switch

12V DC,

1A Power Supply

User Manual CD Quick

Installation Guide

Package Contents

section

Overview

Feature Overview

Dual-User

Simultaneously supports up to two users.

Hot Keys

Hot-key functionality allows you to select a desired port using designated key

commands. By using a simple hot-key sequence on your keyboard, you can

select one server from as many as 256 servers, instantaneously.

AutoScan

The AutoScan feature allows you to set your PRO3 Dual-User KVM Switch to

scan and monitor the activities of all connected servers, one by one. The time

interval allotted for each server can be adjusted through the On-Screen Display

(OSD) menu.

Video Resolution

The PRO3 KVM Switch supports video resolutions of up to 1920x1440.

Security

Allows you to specify user names and passwords to prevent unauthorized users

from accessing the OSD and KVM Switch.

Dedicated Daisy-Chain Port

Up to 16 KVM switches can be daisy-chained together using dedicated

ports, so you can easily expand your KVM conﬁguration as your server

environment grows.

On-Screen Display (OSD)

The OSD feature simpliﬁes server management by allowing you to assign

individual names to each connected server throughout the system. It provides a

visual means of switching between servers and assigning the hot-key scheme.

The OSD can also be set up to support regional languages.

LED Display

An LED display on the front panel of the PRO3 KVM Switch serves as a status

monitor. An LED illuminates to indicate that the console currently controls the

corresponding server.

Flash Upgrade

Flash-upgradeable ﬁrmware allows you to install the latest ﬁrmware on your

PRO3 KVM Switch. This enables your KVM Switch to maintain consistent

compatibility with the latest devices and servers. Firmware upgrades are free for

the life of your PRO3 KVM itch and can be downloaded from Belkin’s support

website at www.belkin.com/support.

section

Overview

Equipment Requirements

Cables

Connecting the PRO3 KVM Switch to a server requires a Belkin Dual-Port

Micro-Cable Kit.

Belkin Dual-Port Micro-Cable Kits:

F1D9400-XX (PS/2-style) F1D9401-XX (USB-style)

F1D9400-XX (PS/2-style)

F1D9401-XX (USB-style)

Belkin PRO3 Dual-User Daisy-Chain Cable: F1D109-XX

(-XX denotes length in feet)

F1D109-XX

Note: Product codes and availability may vary.

section

Overview

System Requirements

OS Platforms

The PRO3 KVM Switch is compatible with CPUs running on, but not limited to,

the following OS platforms:

• Windows®NT®, 2000, XP, Server 2003, or Vista®

• Microsoft®DOS 5.x and above

• Red Hat®Linux®8.x and above

• Novell®NetWare®5.x

• Mac OS®X and above (with USB support)

• Sun™Solaris™8.x and above

Keyboards

• PS/2-compatible

• USB-compatible

• Supports 101-/102-/104-/106-standard-key keyboards

Mice

• PS/2- and USB-compatible mice (with PS/2 adapter) having

3, 4, or 5 buttons

• PS/2- and USB-compatible wireless or optical mice

Monitors

• CRT

• LCD (with VGA support)

section

Overview

Unit Display Diagrams

Front View of the PRO3 KVM Switch:

Power LED

Online LED

Active LED

OmniView

PRO3

Back View of the PRO3 KVM Switch:

Daisy-chain in

Flash-upgrade port

and DIP select switch

Daisy-chain out

Console 1: VGA, PS/2 mouse/keyboard ports,

USB mouse/keyboard ports

SCSI-50 dual-host ports

DC power jack

section

Overview

Specifications

Part No.: F1DA208Z, F1DA216Z

Enclosure: Metal enclosure with high-impact plastic faceplate

Power: 12V DC, 1A power adapter,

center-pin-positive polarity

Daisy-Chain: Maximum of 16 OmniView KVM Switches

No. of Servers

Supported: 8 and 16 respectively for 8- and 16-port models

(256 servers max. via daisy-chaining)

Monitors Supported: CRT and LCD (with VGA support)

Max. Resolution: Up to 1920x1440 @ 75Hz

Keyboard Input: PS/2 (miniDIN6), USB (Type A)

Mouse Input: PS/2 (miniDIN6), USB (Type A)

Monitor Port: VGA (HDDB15 female)

CPU Ports: SCSI-50

Daisy-Chain Ports: SCSI-36 female

Flash-Upgrade Port: RJ11

Direct Port Selectors: 8 and 16 respectively for 8- and 16-port models

Operating Temp: 32° to 104° F (0~40° C)

Storage Temp: -4° to 140° F (20~60° C)

Humidity: 0-80% RH, non-condensing

Warranty: 3 years

Dimensions: (F1DA208Z) 17.25 x 1.75 x 7.5 in.

(438mm x 44.5mm x 190mm)

(F1DA216Z) 17.25 x 3.5 x 7.5 in.

(438mm x 89mm x 190mm)

Weight: (F1DA208Z) 9.2 lbs. (4.2kg.)

(F1DA216Z) 12.0 lbs. (5.5kg.)

Note: Speciﬁcations are subject to change without notice.

section

Installation

Pre-Configuration

Where to Place the PRO3 KVM Switch

The enclosure of the PRO3 KVM Switch is designed for stand-alone or

rack-mount conﬁguration. The 8- and 16-Port PRO3 KVM Switches are natively

rack-mountable in standard, 19-inch server racks. Rack-mount hardware is

included with these Switches for a sturdy rack installation.

Consider the following when deciding where to place

the PRO3 KVM Switch:

• whether or not you intend to use the direct-access port selectors

• the lengths of the cables attached to your keyboard, monitor, and mouse

• the location of your servers in relation to your console

• the lengths of the cables you use to connect your servers to the

PRO3 KVM Switch

Cable-Distance Requirements

For PS/2 Servers:

VGA signals transmit best up to 25 feet (7.6m). Beyond that length, the

probability of video degradation increases. For this reason, Belkin recommends

that the length of the cables between the PRO3 KVM Switch and the connected

servers does not exceed 25 feet (7.6m).

For USB Servers:

USB signals can be transmitted up to 15 feet (4.5m) between the PRO3 KVM

Switch and server. Beyond that length, the probability of USB-signal failure is

likely, and may cause the device to fail.

Note: The Belkin OmniView CAT5 Extender (F1D084) may be used to extend

your console (keyboard, mouse, and monitor) by up to 300 feet (91m).

Cautions and Warnings!

Avoid placing cables near ﬂuorescent lights, air-conditioning equipment, or

machines that create electrical noise (e.g., vacuum cleaners).

Before attempting to connect anything to the PRO3 KVM Switch or your

servers, ensure that everything is powered off. Plugging and unplugging cables

while servers are powered on may cause irreversible damage of the servers

and/or the PRO3 KVM Switches. Belkin is not responsible for damage caused

in this way.

You are now ready to begin installation of your PRO3 KVM Switch. The

following sections (pages 8-14) provide complete instructions for the

hardware setup of a single PRO3 KVM Switch (F1DA208Z, F1DA216Z).

section

Installation

Mounting the PRO3 KVM Switch

Bracket Installation

Eight- and 16-Port PRO3 KVM Switches include adjustable mounting brackets

ideal for installation in 19-inch racks. The mounting brackets feature three

adjustment positions to allow you to set the PRO3 KVM Switch’s face ﬂush with

the ends of the rails or to extend the PRO3 KVM Switch past the front of the

rails. Please follow these simple steps to achieve the desired adjustment.

Step 1

Determine how far you would like the PRO3 KVM Switch to protrude from the

rack. Select a bracket-hole scheme.

Step 2

Attach the bracket to the side of your PRO3 KVM Switch using the Phillips

screws provided. (Refer to diagram below.)

Step 3

Mount the PRO3 KVM Switch to the rack-rail assembly.

(Refer to diagram below.)

Your PRO3 KVM Switch is now mounted securely to the rack and you are ready

to connect the console.

section

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Belkin

Belkin

Belkin F1DK102Uea Manual de usuario

Belkin

Belkin OMNIVIEW P72114 Manual de usuario

Belkin

Belkin USB PERIPHERAL SWITCH Manual de usuario

Belkin

Belkin BITRONICS P72655 Manual de usuario

Belkin

Belkin F5L009EA Instrucciones de uso

Belkin

Belkin OmniView ENTERPRISE Quad-Bus Series Manual de usuario

Belkin

Belkin Network USB Hub Manual de usuario

Belkin

Belkin P73965 Manual de usuario

Belkin

Belkin F5U303 Manual de usuario

Belkin

Belkin F1DN104K Manual de usuario

Belkin

Belkin OMNIVIEW P74696 Manual de usuario

Belkin

Belkin F1DN102MOD-HH-4 Manual de usuario

Belkin

Belkin OmniView Pro Series Manual de usuario

Belkin

Belkin OmniView F1DB102P2ea Manual de usuario

Belkin

Belkin OmniView F1DN102DEA Manual de usuario

Belkin

Belkin ePowerSwitch F1D001 Manual de usuario

Belkin

Belkin Bitronics F1U128-KIT Manual de usuario

Belkin

Belkin F1DJ102PeaB Manual de usuario

Belkin

Belkin HI-SPEED USB 2.0 EXTERNAL DRIVE ENCLOSURE Manual de usuario

Belkin

Belkin F1DN104F-3 Manual de usuario

Belkin

Belkin OmniView F1DE108C Manual de usuario

Belkin

Belkin Wireless Gplus Notebook Card Manual de usuario

Belkin

Belkin Bitronics F1U128-KIT Manual de usuario

Belkin

Belkin BUS STATION F5U100 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario