Belkin SE 2-Port Manual de usuario

P73039 F1D102

The OmniView™

SE 2-Port

User Manual

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 1

Introduction

Thank you for purchasing the Belkin Components OmniView™SE KVM switch. Controlling

multiple PCs from one keyboard, mouse and monitor has never been easier!

The OmniView™SE puts you in control. Compatible with AT and PS-2 style computers, it is

loaded with features such as Integrated Mouse Conversion Technology, separate DB25 daisy-

chain ports, and an optional 19" (48.3cm) rackmount kit. It has complete keyboard and mouse

emulation for error-free boot-ups, plus Microsoft®IntelliMouse®support. The OmniView™SE is

also designed to handle the most demanding resolutions up to 1600 x 1200, without any

noticeable degradation in image quality. Switching can be done through convenient front-

panel pushbutton, or keyboard “Hot” key commands. And if you wish to control a Macintosh®

computer, simply add the Belkin MAC Adapter™for even more system control.

• Allows a user to control two computers from one keyboard, mouse and monitor

• Integrated Mouse Conversion Technology allows connection of AT-style computers

that have serial mouse ports while using a PS/2 mouse only at the console

• Keyboard and mouse emulation for error-free boot-ups

• Microsoft®IntelliMouse®and IntelliMouse®Pro support

• Up to 1600 x 1200 resolution support

• DB25 Daisy-Chain ports - allows control over more computers by adding more

OmniView™SE units

• Supports both AT and PS/2 style keyboards (AT requires AT-PS/2 adapter)

• Supports VGA, SVGA and Multisync monitors

• Uses inexpensive and commonly found standard cables

• Pushbutton or keyboard “Hot” key command switching

• AutoScan mode for even more convenience

• Audible feedback when switching

• Recalls CAPS LOCK, NUM LOCK and SCROLL LOCK keys' status for each

computer automatically

• Front-panel status LEDs

• Works with OmniView™PS/2 MAC Adapter™

• No software required

• One year product warranty

Package Contents

OmniView™SE 2-Port F1D102

9VDC, 600mA power supply F1D065-PWR (U.S., Canada)

F1D065-PWR-UK (United Kingdom)

This manual P73039

Registration card P72009

Features

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 1

Technical Specifications

Console Connectors:

Keyboard: 6 pin MiniDIN female

Mouse: 6 pin MiniDIN female (for PS/2 mouse)

DB9 male (for spare serial mouse)

Monitor: HDDB15 female

Computer Port Connectors:

Keyboard: 6 pin MiniDIN female

Mouse: 6 pin MiniDIN female (for PS/2 mouse)

DB9 male (for serial mouse)

Monitor: HDDB15 male

Dimensions:

Width: 9.5" (237 mm)

Height: 2.3" (58 mm)

Depth: 6.0" (153 mm)

Weight: 2.5 lbs (1.1 kg)

Operating Temp: 32 to 104 deg. F (0~40 deg. C)

Storage Temp: -4 to 140 deg. F (-20 ~ 60 deg. C)

Humidity: 0~80% RH, non-condensing

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 2

Product Detail

SLAVE INPUT

DB25 Daisy-chain port

MASTER INPUT

SLAVE OUTPUT

DB25 Daisy-chain port

DC power

jack DIP switches

Optional

serial mouse

connector

CONSOLE

connectors

Keyboard

connector PS/2 mouse

connector

VGA monitor

connector

PC PORT

connectors

Serial mouse

output

Keyboard

output PS/2 mouse

output

VGA signal output

FRONT PANEL

REAR PANEL

Current Active Port

LED Indicators

Current Active Bank

LED Indicators

Bank Select/

Scan Button

Port Select

Button

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 3

Make sure you have the right cables!

The OmniView™SE requires cables to connect the eight computers you will be controlling.

Below are the Belkin part numbers and their descriptions. We recommend purchasing Cable

Kits based on the type of mouse port your computer uses. Cable kits have all the cables you

need to connect one computer to the OmniView™SE:

PS/2 Cable Kit - A3X982

Includes:

•2 x F2N036-06

•1 x F2N025-06-T

AT Cable Kit - A3X939

Includes:

•1 x F3A510-06

•1 x F2N025-06-T

•1 x F2N209-06-T

•1 x F2N017

(see below for descriptions of each)

Individual Cables and Adapters:

• PS/2 cable for keyboard and mouse ports

6 pin MiniDIN male/male

Part# F2N036-XX

• Standard VGA cable for monitor port

HDDB15 male/female with thumbscrews

Part# F2N025-XX-T

• Serial extension cable for serial mouse

DB9 male/female with thumbscrews

Part# F2N209-XX-T

•AT keyboard cable for AT-style keyboard port

5 pin DIN male/male

Part# F3A510-XX

• AT to PS/2 keyboard adapter

5 pin DIN female/6 pin MiniDIN male

Part# F2N017

Other Cables and Adapters:

• High-resolution/high-refresh rate VGA cable for monitor port

HDDB15 male/female with thumbscrews

Part# A3H981-XX

• PS/2 to AT keyboard adapter - for use with a computer having an AT-style keyboard port

6 pin MiniDIN female/ 5 pin DIN male

Part# F2N018

NOTE: The "XX" in the part number represents the length in feet.

6 pin MiniDIN

6 pin MiniDIN Female 5 pin DIN Male

HDDB15

List of Parts Needed

5 pin DIN

HDDB15

DB9

Daisy-Chain Cable

• DB25 Male/Male,

2’ (61cm) with ferrite

Part # F1D108-CBL

Optional 19" (48.3cm) Rackmount Kit

• 19"(48.3cm), 1.5u high

Part # F1D103

5 pin

DIN Female 6 pin MiniDIN Male

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 4

1. Set the DIP switches. If you have only one OmniView™SE, use the MASTER bank

setting. If the OmniView™SE you are using will be daisy-chained off another unit, use a

unique slave setting. Please refer to the next section for more information regarding

multiple OmniView™SE units.

PLEASE FOLLOW THIS INSTALLATION PROCEDURE EXACTLY. NOT DOING SO MAY

RESULT IN KEYBOARD AND/OR MOUSE ERRORS, OR FAULTY OPERATION.

WARNING: Before attempting to connect anything to the OmniView™SE or

the computers, make sure everything is powered off. Plugging and unplugging

cables may cause irreversible damage to your computers and the OmniView™SE.

Belkin Components will not be held responsible for damage caused.

Hardware Installation

DIP SWITCH SETTINGS

1234

ON ON ON ON BANK 0 MASTER

ON ON OFF ON BANK 1 Slave

ON ON ON OFF BANK 2 Slave

ON ON OFF OFF BANK 3 Slave

BANK ADDRESS

3. Connect the monitor to the OmniView™SE. Using the attached cable, or the one

included with your monitor, connect it to the HDDB15 female port on the back of the

OmniView™SE labeled with the monitor symbol at the CONSOLE section.

2. Find a convenient place to put your OmniView™SE. Take note of the length of your

cables so that your computers, OmniView™SE, keyboard, mouse, and monitor are

distanced properly.

Monitor

NOTE: ON is down

Use this setting if

you have only one

OmniView™SE

DIP switches 1 & 2 set the SCAN_TIME. See the USAGE section regarding

this setting.

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 5

6. Connect the first computer's mouse cable to the OmniView™SE. If using a PS/2 cable

(Belkin Part# F2N036-XX), connect one end to the PS/2 mouse port on the computer,

and the other end to the PC1 PS/2 mouse port on the back of the OmniView™SE. If

using a serial mouse cable (Belkin Part# F2N209-XX-T), connect one end to a DB9 serial

port on the computer, and the other end to the PC1 DB9 serial mouse port on the back

of the OmniView™SE.

F2N209-XX-T for serial mouse

F2N036-XX for PS/2 mouse

Back of OmniView™SE

Back of PC

4. Connect the keyboard and mouse to the OmniView™SE. If you have an AT-style

keyboard, you will need an AT-PS/2 adapter (Belkin Part# F2N017).

5. Connect the first computer's VGA cable to the OmniView™SE. Using the VGA cable

(Belkin Part# F2N025-XX-T or A3H981-XX), connect the male end of the cable to the

VGA port on the computer, and the female end on the PC1 VGA port at the back of

OmniView™SE.

PS/2 Style Keyboard

F2N025-XX-T

Back of OmniView™SE

Back of PC

PS/2 Mouse

Hardware Installation (continued)

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 6

Hardware Installation (continued)

7. Connect the first computer's keyboard cable to the OmniView™SE. If using a PS/2

cable (Belkin Part# F2N036-XX), connect one end to the PS/2 keyboard port on the

computer, and the other end to the PC1 keyboard port on the back of the OmniView™

SE. If your computer has an AT-style keyboard port, you will need a PS/2-AT keyboard

adapter (Belkin Part# F2N018). If using an AT-cable (Belkin Part# F3A510-XX), connect

one end to the AT keyboard port on the computer, and the other end to an AT to

PS/2 keyboard adapter (Belkin Part# F2N017). Then, connect the adapter to the PC1

keyboard port on the back of the OmniView™SE.

F2N036-XX

Back of OmniView™SE

Back of PC

8. Double check all the connections. Make sure the keyboard and mouse cables go to the

correct ports.

9. Repeat steps 5-7 for the remainder of the computers.

10.Attach the power supply to the power supply connector at the back of the

OmniView™SE. Plug this into any available AC outlet. You should see the LED or Port 1

on the front panel blink, and hear a beep. Power up your monitor.

11.You can now power up all of your computers simultaneously. The first computer will

show up on the monitor. Check to see if the keyboard and mouse work, as well as the

image displayed on the screen. If this is okay, press the CHANNEL button and check

the functionality of the other computers. If you find any errors, double-check all of the

cable connections.

NOTE: Avoid pressing any keys on the keyboard or moving the mouse if the currently

selected port has a computer that is in the process of booting up. This may cause

the computer to not detect, or initialize the keyboard or mouse drivers properly.

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 7

The OmniView™SE has the capability to be daisy-chained to additional units for control over

more computers. Up to four OmniView™SE units can be daisy chained together, whether

2-Port, 4-Port, or a mixture of both. The example above shows two OmniView™SE 2-Port units

and two OmniView™SE 4-Port units daisy-chained together.

Each OmniView™SE unit is defined as a BANK. See diagram above for more information.

BANK numbers range from 0 to 3 for a total of 4 BANKs. BANK 0 is the MASTER bank, while

banks 1 through 3 are slave banks. The MASTER bank is the unit that connects to the console

keyboard, mouse, and monitor.

The DIP switches must be set correctly for proper identification and usage. See page 5 for the

actual settings. If you are using the OmniView™SE in a single-unit configuration, it must be

set as the MASTER (BANK 0). If it is to be used as a slave unit, then it must be set to any

unused unique bank number from 1 through 3.

CONSOLE

Keyboard,

mouse and

monitor

Bank 0 (Master)

Bank 1 (slave)

Bank 2 (slave)

Bank 3 (slave)

3456

78910

11 12

(SKIP IF YOU HAVE ONLY ONE OmniView™SE)

Usage

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 8

The OmniView™SE is designed to be able to cascade with the OmniView™PRO as well. In

such a scenario, it is recommended that the OmniView™PRO be the MASTER unit, and the

OmniView™SE units be slave units. This is shown in the diagram above. The OmniView™PRO

is an 8-Port, 19" (48.3cm) rackmountable OmniView™, having the same features as the

OmniView™SE, but adding On-Screen Display. When the OmniView™PRO is used as

MASTER, all of the other OmniView™units in the chain will benefit from the On-Screen

Display of the MASTER OmniView™PRO.

When the OmniView™PRO is used as the MASTER unit, 15 more OmniView™units

(SE and/or PRO) can be daisy-chained to the master. Only BANKs 1 to 3 can be used by

OmniView™SE units. BANKs 4 to 15 must be used by PRO units.

Daisy-chaining OmniView™SE units with an OmniView™PRO

CONSOLE

Keyboard,

mouse and

monitor

Bank 0 (Master)

Bank 1 (slave)

Bank 2 (slave)

Bank 3 (slave)

1234567 8

9101112

13 14

15 16 17 18

Usage (continued)

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 9

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Belkin

Belkin

Belkin F1DN102V Manual de usuario

Belkin

Belkin F1DG102Pea Manual de usuario

Belkin

Belkin OmniView F1D5102P Manual de usuario

Belkin

Belkin OMNIVIEW F1DN102D Manual de usuario

Belkin

Belkin OmniView F1D104 Manual de usuario

Belkin

Belkin F4U006 - Travel USB Hub Manual de usuario

Belkin

Belkin USB Desk Hub Manual de usuario

Belkin

Belkin F5U303 Manual de usuario

Belkin

Belkin F1U400 - 4x4 USB Peripheral Switch Sharing Manual de usuario

Belkin

Belkin OmniView F1DK102P Manual de usuario

Belkin

Belkin WeMo F7C027 Manual de usuario

Belkin

Belkin F1DN102C Manual de usuario

Belkin

Belkin THUMB HUB F5U218-MOB Manual de usuario

Belkin

Belkin OmniView F1DP116G Manual de usuario

Belkin

Belkin OMNIVIEW F1DA104PEA Manual de usuario

Belkin

Belkin Omniview F1D201 Manual de usuario

Belkin

Belkin 4-Port Mobile Hub Manual de usuario

Belkin

Belkin F1U109 Manual de usuario

Belkin

Belkin F1DN108C Manual de usuario

Belkin

Belkin F1DM102U Manual de usuario

Belkin

Belkin F1DA208Z Manual de usuario

Belkin

Belkin F5U237 Manual de usuario

Belkin

Belkin F1DN104K-3 Hoja de instrucciones

Belkin

Belkin F1DH104L Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario