basIP AV-05FD Manual de usuario
USER MANUAL
INDIVIDUAL ENTRANCE PANEL
AV-05FD
AV-05FD
There is also the possibility of individual text or logo appliance on the panel
(through in the service center).
BAS-IP AV-05FD — stylish vandal-proof panels with installation by the flush
mount method.
Full User Manual
Device description
wiki.bas-ip.com
INDIVIDUAL ENTRANCE PANEL
Main features
• Panel type: Individual.
• Camera: 1/4”.
• Resolution: 2 Мp.
• Сamera angle: 100° (horizontal).
• Output video: FullHD (1920×1080), H.264 Main Profile.
• Button: Touch-free.
• Response distance: 15 — 25сm (dependingon external
conditions).
• Night backlight: 6 LEDs.
• Light sensitivity: 0,01 LuX.
• Protection class: IP65.
• IK-Code: IK08.
• Working temperature: -40 — +65 °С.
• Power consumption: 6,5 W, in standby — 3,6 W.
• Power supply: PoE, +12 V DC.
• Body: Aluminum.
• Colors: Black, Silver, Gold.
• Dimensions for installation: 85 × 180 × 45 mm.
• Size of the panel: 95 x 190 x 27 mm.
• Installation: Flush mount.
Appearance
Touchless call button.
Microphone.
Backlight.
Camera.
Loudspeaker.
1
2
3
4
5
-
-
-
-
-
1
2
4
5
3
EAN: 5060514914137 (BLACK)
EAN: 5060514914151 (SILVER)
EAN: 5060514914144 (GOLD)
Power Peripheral Interface LAN (PoE)
RJ45
DC12V
+12V GND 485+ 485- NC COM NO EXIT DS DIN
SH-45 Door Sensor
Exit Button
GND
+12V
SH-42
(optional)
Completness check of the product
Before installation of the outdoor panel, it is necessary to check that
it is complete and all components are available.
Outdoor panel kit includes:
1 pc
1 pc
1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the outdoor panel
connection.
For connection you will need:
Electrical connection
An Ethernet UTP CAT5 or higher cable connected to a network
switch / router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters,
according to the IEEE 802.3 standard.
Power supply at +12 V, 2 amps, if there is no PoE.
Connection scheme of electromechanical lock
using external power supply for panel and the lock.
You can connect any type of electromechanical or electromagnetic lock for which the switched current
does not exceed 1 Amp.
+12V
DC
+-+12V
DC
+-
Connection scheme of electromagnetic lock
using external power supply for panel and the lock.
+12V
DC
+-+12V
DC
+-
Power supply
for the panel Power supply
for the lock Power supply
for the lock
Power supply
for the panel
Electromechanical
lock Electromagnetic
Lock
Outdoor panel
Manual
Flush mounting bracket
Set of wires with connectors for connection of power supply,
lock, and additional modules
Wrench set screws
Power Peripheral Interface LAN (PoE)
RJ45
DC12V
+12V GND 485+ 485- NC COM NO EXIT DS DIN
SH-45 Door Sensor
Exit Button
GND
+12V
SH-42
(optional)
85 mm
180 mm
Mechanical mounting
and the local network.
It is also necessary to provide supply of a power cable, additional modules
Before mounting the door panel, a hole or recess in the wall with dimensions
of 87 × 182 × 46 mm must be provided.
Niche ScrewsOutdoor PanelBracket
Outdoor Panel
95 mm 27 mm
190 mm
87 mm
182 mm
120-140 cm
Flush Bracket
Warranty
The warranty card number
Model name
Serial number
Seller name
With following stated terms of warranty is familiar, functional test was
performed in my presence:
Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from
the date of sale.
Transportation of product must be in its original packaging or supplied one
by the seller.
The product is accepted in warranty repair only with a properly filled warranty
card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases
provided by law, only in the original packaging, in a full complete set,
appearance corresponding to the new equipment and presence of all relevant
properly filled documents.
This warranty is in addition to the constitutional and other consumer rights
and in no way restrict them.
Terms of warranty
The warranty card must indicate the name of the model, serial number,
purchase date, name of the seller, seller company stamp and
the customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs carried out only during the warranty period specified
in the warranty card.
The service center is committed to do everything possible to carry out
the repair warranty products, up to 24 working days. The period spent
on the restoration of product functionality is added to the warranty period.
EAN: 5060514914137 (BLACK)
EAN: 5060514914151 (SILVER)
EAN: 5060514914144 (GOLD)
Notes
Notes
EAN: 5060514914137 (BLACK)
EAN: 5060514914151 (SILVER)
EAN: 5060514914144 (GOLD)
www.bas-ip.com
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de basIP
basIP
basIP AV-03D Manual de usuario
basIP
basIP AV-01D Manual de usuario
basIP
basIP AU-04LA Manual de usuario
basIP
basIP AM-02 Manual de usuario
basIP
basIP BI-02B Manual de usuario
basIP
basIP AV-05SD Manual de usuario
basIP
basIP SP-03F Manual de usuario
basIP
basIP AQ-07LW Manual de usuario
basIP
basIP AA-07BD Manual de usuario
basIP
basIP AA-07FB Manual de usuario
basIP
basIP AT-07L Manual de usuario
basIP
basIP AV-01BD Manual de usuario
basIP
basIP SP-03 Manual de usuario
basIP
basIP AA-07FB Manual de usuario
basIP
basIP AV-02FDR/E Manual de usuario
basIP
basIP AV-04SD Manual de usuario
basIP
basIP SP-03 Manual de usuario
basIP
basIP AQ-07LL Manual de usuario
basIP
basIP AV-04SD Manual de usuario
basIP
basIP AQ-07LL Manual de usuario
