AWS CV-100 Manual de usuario

Este manual sirve para los siguientes modelos

2

Tabla de contenidos

Manuales populares de Escala de otras marcas

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario

Fidelity Electronics

Fidelity Electronics G2e Manual de usuario

American Weigh Scales, Inc.

CV-10

CV-100

CV-300

User Manual

CV-Series

Digital Pocket Scale

CV-Series

I/O

M

T

American Weigh CV-Series

Thank you for purchasing the American Weigh

CV-Series digital scale. Please read all operating

instructions carefully before use. This electronic scale

is a precision instrument. With normal care and proper

treatment, it will provide years of reliable service.

Never load the scale with more than the maximum

capacity. Overloading will permanently damage it!

Avoid any exposure to extreme heat or cold. Your

scale works better when operated at normal room

temperature. Always allow the scale to acclimatize to

normal room temperature for at least one hour before

use.

Give your scale sufcient warm up time. Usually

30-60 seconds before calibration to give the internal

components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt,

moisture, vibration, air currents and a close distance to

other electronic equipment can all cause an adverse

effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed

onto tray top. Although this scale is designed to be

quite durable, try to avoid rough treatment as this may

permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the

scale. This is a precision instrument and must be

handled with extreme care.

Only operate the scale on a stable, vibration free

surface.

I. OPERATION

Place Scale on a horizontal at surface.

1. Press [I/O] key.

2. Wait until the scale goes to zero.

3. Put the object(s) on the weighing platform.

4. Using the [M] key, you can switch between the

weighing units.

II. TARE WEIGHING

1. Turn on scale as described above.

2. Place the "tare item" on the platform. (ie tray)

3. Press [T] and wait until zero is displayed.

4. Add the "net-weight-item".

III. CALIBRATION

Calibration is NOT required before rst use. Only

calibrate if scale is not weighing properly.

**Make sure you use the correct calibration weight for

your scale or the calibration will not be accurate**

CV-10: 10g calibration weight

CV-100: 100g calibration weight

CV-300: 300g calibration weight

1. Turn OFF the scale.

2. Press and hold the [M] key, then tap the

[T]. The display will show "CAL".

3. Now release both keys. The internal serial number

will display. Press [T] again to zero the scale.

4. Place the required standard calibration weight (not

included with CV-300/CV-100) onto the platform.

5. Press the [T] button again. The display will show the

calibration value.

6. Press [T] once more. The display will show "PASS"

and automatically turn off. Calibration is complete.

IV. TROUBLESHOOTING

The primary reasons for inaccuracy or malfunction

are low batteries, incorrect calibration, overload or

operating on an unstable surface. Please keep this in

mind and maintain and operate your scale properly.

This scale is a precise instrument and must be

handled with the utmost care and caution.

[Display] Elimination of errors

[OUE2] Recalibrate the scale as shown above.

[oL_d] You are overloading the scale. Remove the

excessive load immediately!

[nothing] Readjust or replace batteries.

[8888] Use the scale in a more stable position

Specications

Model CV-10 CV-100 CV-300

Capacity 10g / 6.43dwt / 0.353oz /

0.322ozt / 50ct / 154.4gn

100g / 64.3dwt / 3.53oz /

3.22ozt / 500ct / 1544gn

300g / 193dwt / 10.59oz /

9.65ozt / 1500ct / 4630gn

Resolution 0.001g / 0.001dwt/ 0.001oz /

0.001ozt / 0.005ct / 0.02gn

0.01g / 0.01dwt / 0.001oz /

0.001ozt / 0.05ct / 0.1gn

0.1g / 0.1dwt / 0.01oz /

0.01ozt / 0.5ct / 1gn

Display 5-Digit Backlit LCD Display

Calibration Weight 10 g 100 g (sold seperate) 300 g (sold seperate)

Platform Dimensions

(inches)

2.6 x 2.1” (unfolded)

Scale Dimensions

(inches)

5.0 x 1.5 x 1.0” (closed)

Power 3 (three) LR-44 “calculator” Batteries (included)

Product Weight 2 oz