Avocent DSR Series DSR1030 Manual de usuario

The following instructions will help you

to connect your DSR switch.

Should you require further assistance, please

consult your installer/user guide.

The Power of Being There

To connect a DSR switch

Quick Installation Guide

DSR®Switch

DSR1030 | DSR2030 | DSR4030 | DSR8030 Switches

Connecting power to the

DSR switch

Power down all servers that will be part of your DSR

switching system. Locate the power cord that came

with the DSR switch. Plug one end into the power

socket on the rear of the DSR switch. Plug the other

end into an appropriate AC wall outlet.

Connecting the local port

Plug your VGA monitor, PS/2 or USB keyboard and

mouse cables into the appropriately labeled DSR

switch ports.

Connecting a DSRIQ module to

the DSR switch

Choose an available port on the rear of your DSR

switch. Plug one end of a CAT 5 cable (4-pair, up to

10 meters) into a numbered port and plug the other

end into the RJ-45 connector of a DSRIQ module.

Connecting a server to the

DSRIQ module

Plug the DSRIQ module into the appropriate ports on

the back of the server. Repeat this procedure for all

servers that are to be connected to the DSR switch.

Connecting network and

remote users

Plug a CAT 5 cable from your Ethernet network into

the LAN connector on the back of your DSR switch.

Network users will gain access through this port.

Plug in the

keyboard, monitor

and mouse for your

local connection.

Server

Local Connections

Server

Modem

Connect the

switch to the

network.

Connect DSRIQ

modules to the

DSR switch.

Connect servers to

the DSRIQ modules.

Power down all

servers and

attach the

appropriate

power cord to

the DSR switch.

Plug in the

external modem

(optional).

Server

Connecting an external

modem (optional)

The DSR switch may also be accessed using an ITU

V.92, V.90 or V.34-compatible modem. Plug one end of

a 9-pin serial cable into the MODEM connector on the

back of your DSR switch. Plug the other end into the

appropriate connector on the back of the modem.

NOTE: Using a modem connection instead of a LAN

connection will limit the performance capability of your

DSR switch.

(continued on reverse side)

1357

2468

91113

10 12 14

DSR Switch

Check our web site at www.avocent.com/support to search the knowledge base or use the online request.

Avocent, the Avocent logo, The Power of Being There and DSR are registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. © 2005 Avocent Corporation. All rights reserved. 590-473-603A

Telephone

network

Ethernet

1357

2468

91113

10 12 14

The following instructions will help you

to connect your DSR switch.

Should you require further assistance, please

consult your installer/user guide.

Connecting the SPC device to the

DSR switch (optional)

Plug one end of the cable supplied with the SPC

power control device into the SPC port on the DSR

switch and plug the other end into the SPC device.

Plug the power cords from the target servers into the

SPC power outlets. Plug the SPC device into an

appropriate AC wall outlet.

Powering up targets and switch

Power up each target server and then power up the

DSR switch.

Connecting local virtual media

(optional)

Connect virtual media devices to any of the five USB

ports on the DSR switch.

NOTE: To open a virtual media session with a

server, the server must first be connected to the

switch using a virtual-media capable DSRIQ

module (USB2 or USB2L).

For additional information

For further instructions on DSR switch connection,

software setup and security configuration, please

refer to the installer/user guide included with the

switch. Check http://register.avocent.com for the

latest DSR switch software and firmware updates.

The Power of Being There

To connect a DSR switch

(continued from reverse side)

Quick Installation Guide

DSR®Switch

DSR1030 | DSR2030 | DSR4030 | DSR8030 Switches

Server

DSR Switch

SPC Power

Control Device

Server

Connect your

SPC device to

the target servers

(optional).

Power up target

servers and then

the DSR switch.

Plug in virtual media

devices to the USB

ports (optional).

External Virtual

Media Device

Check our web site at www.avocent.com/support to search the knowledge base or use the online request.

The Power of Being There

1357

2468

91113

10 12 14

1357

2468

91113

10 12 14

The Power of Being There

1357

2468

91113

10 12 14

1357

2468

91113

10 12 14

The Power of Being There

1357

2468

91113

10 12 14

1357

2468

91113

10 12 14

The Power of Being There

Otros manuales para DSR Series DSR1030

Este manual sirve para los siguientes modelos

Otros manuales de Cambiar de Avocent

Avocent

Avocent DSR Series DSR2020 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR DSR800 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent DSR 1024 Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView SC540 Manual de usuario

Avocent

Avocent AMX5010 Manual de usuario

Avocent

Avocent DSR Series DSR1030 Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView Manual de usuario

Avocent

Avocent DSR Series DSR1021 Manual

Avocent

Avocent SwitchView 100 Series Manual de usuario

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent AutoView 1415 Instrucciones de instalación y mantenimiento

Avocent

Avocent Single port KVM over IP switch Manual de usuario

Avocent

Avocent DSR Series DSR1020 Manual de usuario

Avocent

Avocent Eletric Keyboard Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR1161 Manual de usuario

Avocent

Avocent DSR Series DSR4030 Manual de usuario

Avocent

Avocent SWITCHVIEW OSD - Manual de usuario

Avocent

Avocent DSR Series DSR1010 Manual

Avocent

Avocent SwitchView SC200 Series Manual de usuario

Avocent

Avocent AutoView 1400 Manual de usuario

Avocent

Avocent AMX5100 Manual de usuario

Avocent

Avocent DSR Series DSR4160 Manual de usuario

Avocent

Avocent AutoView 2020 Instrucciones de instalación y mantenimiento

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario