Avocent DSR Series DSR1020 Manual de instrucciones

DSR® x02x/x03x Switch Appliances

Firmware Release Notes

Version 3.6.0.14 or 3.6.6.14 (depending on product)

July 1, 2008

This document outlines:

1. Update Instructions

2. Firmware Version and Language Support Information

3. Enhancements

4. Fixes

5. Known Issues

6. Flash Update Failure Recovery

=============================================================================

Update Instructions

=============================================================================

Please refer to your user manual for detailed instructions to update the switch.

Important Note:

If the DSR switch currently has a firmware version earlier than 3.2.0.17 (or 3.6.2.17 for DSR1020,

DSR2020, or DSR4020 switches) then the switch must first be upgraded to 3.2.0.17 (or 3.6.2.17 for

DSR1020, DSR2020, or DSR4020 switches) before it can be updated with this newest version.

DSR Support Plug-in for DSView® 3 Management Software

Starting in DSView 3 software version 3.6, the DSR switch support is delivered via a plug-in. Please

ensure the latest DSR Support plug-in is loaded if using DSView 3 software.

=============================================================================

Firmware Version and Language Support Information

=============================================================================

The following DSR switches are supported with this update:

Switch

English

Spanish

French

German

Italian

DSR1021

DSR1022

DSR1021_3.6.0.14_en.fl

DSR1021_3.6.0.14_es.fl

DSR1021_3.6.0.14_fr.fl

DSR1021_3.6.0.14_de.fl

DSR1021_3.6.0.14_it.fl

DSR1024

DSR1024_3.6.0.14.fl

N/A

DSR1031

DSR1031_3.6.0.14_en.fl

DSR1031_3.6.0.14_es.fl

DSR1031_3.6.0.14_fr.fl

DSR1031_3.6.0.14_de.fl

DSR1031_3.6.0.14_it.fl

DSR1020

DSR2020

DSR4020

DSR4020_3.6.6.14_en.fl

DSR4020_3.6.6.14_es.fl

DSR4020_3.6.6.14_fr.fl

DSR4020_3.6.6.14_de.fl

DSR4020_3.6.6.14_it.fl

DSR8020

DSR8020_3.6.0.14_en.fl

DSR8020_3.6.0.14_es.fl

DSR8020_3.6.0.14_fr.fl

DSR8020_3.6.0.14_de.fl

DSR8020_3.6.0.14_it.fl

DSR1030

DSR2030

DSR4030

DSR8030

DSRx030_3.6.0.14_en.fl

DSRx030_3.6.0.14_es.fl

DSRx030_3.6.0.14_fr.fl

DSRx030_3.6.0.14_de.fl

DSRx030_3.6.0.14_it.fl

DSR2035

DSR8035

DSRx035 _3.6.0.14_en.fl

DSRx035_3.6.0.14_es.fl

DSRx035_3.6.0.14_fr.fl

DSRx035_3.6.0.14_de.fl

DSRx035_3.6.0.14_it.fl

=============================================================================

Enhancements

=============================================================================

This release contains the following enhancements:

1. Added support to disable the local port OSCAR® graphical user interface (GUI) configuration

buttons (Setup, Commands, and Clear) via DSView 3 software.

Note: This feature requires DSView 3 software version 3.6 or later.

2. Added support for “auto-discovery” to enable the DSR switch to register itself with DSView 3

software as an “unmanaged” device.

Note: This feature requires DSView 3 software version 3.6 or later.

3. Optimized the DSR switch’s video mode detection algorithm to detect the target device’s video

mode and display remote video more quickly so the user can see the POST (Power-On Self Test)

and BIOS screens on faster booting computers.

4. Added support to dynamically enable and disable secure mode on a DSR switch from DSView 3

software. Previously, this required removing the switch from DSView 3 software and adding

again.

Note: This feature requires DSView 3 software version 3.6 or later.

5. Added support for the Avocent iKVM switch integrated into the Dell® PowerEdge® M1000e

Modular Blade Enclosure to provide seamless access to each of 16 server blades and the Dell

Chassis Management Controller (CMC).

Note: The iKVM switch may require a firmware update to support this functionality.

6. Updated the Onboard Web Interface (OBWI) help link to point to an online version of the user

manual.

=============================================================================

Fixes

=============================================================================

This release contains the following fixes:

1. Resolved issue where target devices on an AutoView® switch cascaded via the RJ45 ACI ports

from a DSR switch could not be selected from DSView 3 software.

2. Resolved usability issues in the OSCAR GUI IP Setup screen to allow the user to leave the

gateway field blank to specify no default gateway.

3. The IP address fields on the serial setup console’s network configuration menu are now hidden

when the IP configuration is set to “None.”

4. Resolved issue where a DSR switch in IPv6 mode is removed from DSView 3 software; the switch

was left in secure mode preventing it from being discovered by another DSView 3 software

system.

5. Resolved issue on DSR8020 and DSR8030 switches where the local port user could not connect

to a target device if four (4) unshared remote KVM sessions were active.

6. Resolved issue where characters were dropped when typing extremely fast. The switch now

supports typing at up to 1800 characters per minute.

7. Resolved issue where portions of the DSR switch’s Avocent-proprietary SNMP MIB were readable

via an SNMP walk utility. The entire Avocent-proprietary MIB is now only accessible via DSView 3

software.

=============================================================================

Known Issues

=============================================================================

This release contains no known issues.

=============================================================================

FLASH Update Failure Recovery

=============================================================================

If the green power LED on the front and back panel of the DSR switch blinks continuously, the switch

is in recovery mode. Use the following steps to recover from a failed FLASH upgrade:

1. Set up the TFTP server with server IP address 10.0.0.3.

2. Rename the flash update file to the appropriate filename from the following list and place it into the

appropriate directory on the TFTP server.

Switch

Filename

DSR1021, DSR1022

DSR1021.fl

DSR1024

DSR1024.fl

DSR1031

DSR1031.fl

DSR1020, DSR2020, DSR4020

DSRxx20.fl

DSR8020

DSR8020.fl

DSR1030, DSR2030, DSR4030, DSR8030

DSRxx30.fl

DSR2035, DSR8035

DSR8035.fl

3. If the DSR switch is not on, turn it on now.

4. The recovery process will start automatically.

NOTE: If you do not have a TFTP server, there are several shareware and freeware programs on the

Internet that you can download and install.

Otros manuales para DSR Series DSR1020

Este manual sirve para los siguientes modelos

Otros manuales de Cambiar de Avocent

Avocent

Avocent DSR Series DSR1031 Manual de usuario

Avocent

Avocent AutoView 1415 Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView SC380 Manual de usuario

Avocent

Avocent DSR SWITCH - Instrucciones de instalación y mantenimiento

Avocent

Avocent SC 1x4 Manual de usuario

Avocent

Avocent MPU1016-001 Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 1000R Manual de usuario

Avocent

Avocent AMX 5130 Manual de usuario

Avocent

Avocent SwitchView SC200 Series Manual de usuario

Avocent

Avocent DSR SWITCH - Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 1515 Manual de usuario

Avocent

Avocent SwitchView Manual de usuario

Avocent

Avocent ESP Serial Hub Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView 100 Series Manual de usuario

Avocent

Avocent DSR DSR800 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR2035 Manual de instrucciones

Avocent

Avocent Single port KVM over IP switch Manual de usuario

Avocent

Avocent SwitchView SwitchView IP Manual de usuario

Avocent

Avocent OutLook 1160ES Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView SC420 Manual de usuario

Avocent

Avocent SwitchView IP 1020 Instrucciones de instalación y mantenimiento

Avocent

Avocent KVM Switches Manual de usuario

Avocent

Avocent DSR SWITCH - Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX Switch Series Instrucciones de instalación y mantenimiento

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario