Avocent SWITCHVIEW PC Manual de usuario

The following instructions will help you

connect your SwitchView unit.

Should you require further assistance, please

contact Avocent Technical Support.

(Optional) Powering the

SwitchView unit

Power down all computers that will be attached to your

SwitchView unit. If necessary, plug one end of the power

supply (sold separately) into the power socket on the

rear of the SwitchView unit. Plug the other end into an

appropriate AC power source.

Connecting the peripheral devices

Plug your VGA monitor into the port labeled CONSOLE

on the back of the SwitchView. Plug your keyboard and

mouse into the labeled ports on the front of the unit.

Connecting the first computer

Locate an Avocent SVPS2C-6A or SVPS2C-9A cable

(sold separately). Attach one end to the corresponding

connectors on the first computer to be attached to the

SwitchView. Route the other end of the cable to the

SwitchView and attach the remaining connectors to

an available port set. The port sets are labeled to

correspond with the channels on the unit.

Connecting the remaining computers

Repeat step 3 to connect additional computers.

Powering attached computers

Next to each port is a blue LED. A blinking LED indicates

that the attached computer is not powered.

Power the first attached computer. Wait until it has

completely booted before switching to the next

computer and repeating the process.

Avocent, the Avocent logo, The Power of Being There and SwitchView are trademarks or registered trademarks of Avocent Corporation or its affiliates. All other marks are the property of their respective owners. ©2003 Avocent Corporation. All rights reserved. 590-367-113B

Quick Installation Guide

SwitchView PC

The Power of Being There

To connect a SwitchView PC

Plug in the monitor,

followed by

the keyboard

and mouse.

(Optional) Power

down your

computers and attach

the appropriate

power supply.

Connect the first

computer to the

SwitchView unit.

Plug in the remaining

computers to the

SwitchView unit.

Power up all

attached

computers.

NOTE: All drivers necessary for the SwitchView

are built into the unit. If you are installing the unit

with a Windows operating system and are

prompted for drivers, press NEXT until the

configuration is complete.

NOTE: If keyboard or mouse issues arise when

using a low-power system such as a laptop, you

should order an optional power supply by

contacting Avocent Technical Support.

DC 12V, 1A

PC4 PC3 PC2 PC1

CONSOLE

590-367-113B

Selecting a channel

A channel may be selected in one of the following ways:

• Pressing the button corresponding to the

relevant computer

• Using a hotkey command

The following instructions will help you

operate your SwitchView unit.

Should you require further assistance, please

contact Avocent Technical Support. Using Hotkey Commands

A hotkey command can be used by pressing a series of

key sequences:

• <CTRL><CTRL> <X*> switches the keyboard,

mouse and video simultaneously to another system.

• <CTRL><CTRL> <LEFT ARROW**> toggles scan

mode on or off.

• <CTRL><CTRL> <RIGHT ARROW**> resets and

reinitializes the mouse in case of lock up.

* <X> = the port number of the attached computer

** <SCROLL LOCK><SCROLL LOCK> can be

substituted in any hotkey sequences that use

Quick Installation Guide

SwitchView PC

To operate a SwitchView unit

The Power of Being There

Otros manuales para SWITCHVIEW PC

Otros manuales de Cambiar de Avocent

Avocent

Avocent PS/2 IP Manual de usuario

Avocent

Avocent SwitchView SC120 Manual de usuario

Avocent

Avocent AUTOVIEW 3008 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent DSR Series DSR1010 Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX5020 Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 3100 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR 1024 Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView DVI DH Series Manual de usuario

Avocent

Avocent AutoView 1415 Manual de usuario

Avocent

Avocent SwitchView®SC440 Guía de instalación

Avocent

Avocent DSR Series DSR2020 Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView Manual de usuario

Avocent

Avocent SwitchView SwitchView SC Manual de usuario

Avocent

Avocent Cybex SwitchView SC8 DVI Manual de usuario

Avocent

Avocent SwitchView SwitchView PC Manual de usuario

Avocent

Avocent DSR Series DSR2161 Manual de usuario

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent KVM Switching Manual de usuario

Avocent

Avocent AMX Switch Series Manual de usuario

Avocent

Avocent SwitchView SC4 DVI Manual de usuario

Avocent

Avocent AutoView 1000R Manual de usuario

Avocent

Avocent AutoView 2000 AV2000BC AV2000BC Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario