Avocent Single port KVM over IP switch Manual de usuario

Single port KVM over IP switch

Single Port

KVM over IP SWITCH

USER’S MANUAL

Rev 1.0

Single port KVM over IP switch

TABLE OF CONTENTS

1. THE QUICK INSTALLATION GUIDE

2. INTRODUCTION

2.1 When the sever is up and running

2.2 When the server is dead

2.3 Features

2.4 Package contents

2.5 Technical specifications

2.6 System requirement

2.7 Cable diagrams

3. HARDWARE INSTALLATION

3.1 Operation overview

3.2 Connecting IP- KVM to the host system

3.3 Connecting IP- KVM to multi-port KVM switch

3.4 Connecting External Reset/Power option

4. CONFIGURATION

4.1 Initial Configuration

4.1.1 Initial configuration via DHCP server

4.1.2 Initial configuration via serial console

4.1.3 Keyboard, Mouse and Video configuration

4.1.3.1 IP-KVM switch keyboard settings

4.1.3.2 Remote Mouse Settings

4.1.3.3 Auto mouse speed and mouse synchronization

4.1.3.4 Host system mouse settings

4.1.3.5 Single and Double Mouse Mode

4.1.3.6 Video Modes

5. USAGE

5.1 Prerequisites

5.2 Login into the IP-KVM switch and logout

5.2.1 Login into the IP-KVM switch

5.2.2 Logout from the IP-KVM switch

5.3 The Remote Console

5.4 Main Window

5.4.1 Remote Console Control Bar

5.4.2 Remote Console Status Line

6. MENU OPTIONS

Single port KVM over IP switch

6.1 Remote Control

6.1.1 KVM Console

6.1.2 Remote Power

6.1.3 Telnet Console

6.2 Virtual Media

6.2.1 Floppy Disk

6.2.2 CD ROM

6.2.3 Drive redirection

6.2.4 Options

6.3 User Management

6.3.1 Change Password

6.3.2 Users And Groups

6.4 KVM Settings

6.4.1 User Console

6.4.2 Power Control

6.4.3 Keyboard/Mouse

6.4.4 Video

6.5 Device Settings

6.5.1 Network

6.5.2 Dynamic DNS

6.5.3 Security

6.5.4 Certificate

6.5.5 Serial Port

6.5.6 Date And Time

6.5.7 Event Log

6.6 Maintenance

6.6.1 Device Information

6.6.2 Event Log

6.6.3 Update Firmware

6.6.4 Unit Reset

7. TROUBLESHOOTING

8. CERTIFICATES

A. Pin Assignments

B. Key Codes

C. Video Modes

D. Rack mount kit installation diagram

Single port KVM over IP switch

1. The quick installation guide

Installation

IP-KVM switch redirects local keyboard, mouse and video data to a remote administration console. All

data is transmitted via IP. IP-KVM switch can be used in a multi administrator and multi server

environment as well. Besides, IP-KVM switch is a KVM switch, which can also be used with a local

console.

IP-KVM switch hardware installation

Figure 1-1 The connectors of single port IP-KVM switch front and rear side

Please perform the following steps:

1. Connect the power supply to IP-KVM switch

2. Connect the monitor to the IP-KVM switch console side.

3. Connect the keyboard to the IP-KVM switch console side.

4. Connect the mouse to the IP-KVM switch console side.

5. Connect a VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the host

port of the IP-KVM switch.

6. Connect one purple end of 3-in-one cable to the PS/2 mouse port on the computer, and the other

end of 3-in-one cable to the host PS/2 mouse port on the IP-KVM Switch.

7. Connect one green end of 3-in-one cable to PS/2 keyboard port on the computer, and the other

end of 3-in-one cable to the host PS/2 keyboard port on the IP-KVM switch.

8. Connect the type A connector of USB A-B cable to the host system, while using remote mass

storage control.

9. Connect Ethernet to LAN port and/or modem to DB-9 serial port, depending on how you want to

access IP-KVM switch

Video modes

IP-KVM switch recognizes a limited number of common video modes. When running X-Window on the

host system, please don’t use any custom mode lines with special video modes. If done so, IP-KVM

switch may not be able to detect these. You are on the safe side with all standard VESA video modes.

Please refer to Appendix C for a list of all known modes.

Initial IP configuration

Initially the IP-KVM switch network interface is configured with the parameters shown in Table 1-1.

Host

Console

Single port KVM over IP switch

Parameter Value

IP auto configuration DHCP

IP-Address 192.168.1.22

Net-mask 255.255.255.0

Default-Gateway none

Table 1-1: Initial configuration

If this initial configuration doesn’t meet your local requirements, you need to do the initial IP

configuration. Use one of the following ways:

1. Connect the enclosed NULL modem cable to the serial interface on the rear side. The serial

interface needs to be adjusted with the parameters shown in table 1-2:

Parameter Value

Bits/second 115200

Data bits 8

Parity No

Stop bits 1

Flow Control None

Table 1-2: Serial parameters

Use a terminal software (e.g. hyper term or minicom) to connect to IP-KVM switch. Reset IP-KVM

switch and immediately press < ESC >. You will see some device information and a ’=>’ prompt.

Enter the command ’config’ and press < Enter >. After waiting a few moments you may configure IP

auto configuration, IP address, net mask and default gateway. Pressing < Enter > without entering

values does not change settings. The gateway value must be set to 0.0.0.0 (for no gateway) or any

other value. You will be asked if the values are correct and get a chance to correct them. After

confirming, IP-KVM switch performs a reset.

2. Use a crossover Ethernet cable to connect IP-KVM switch to a subnet where a DHCP server is

available. After the DHCP server has assigned an IP address to IP-KVM switch you can use the web

interface to configure the device.

Web interface

IP-KVM switch may be accessed using a standard JAVA enabled web browser. You may use the

HTTP protocol or a secure encrypted connection via HTTPS. Just enter the configured IP address of

IP-KVM switch into your web browser.

Password pass (factory default)

Changing these settings to user specific values is strongly recommended

and can be done on the User Management page (see the Section called

Users and Groups in Chapter 6 ).

Remote Console

The Remote Console is the redirected screen, keyboard and mouse of the remote host system to

which IP-KVM switch is installed. The web browser which is used for accessing IP-KVM switch has to

Single port KVM over IP switch

supply a Java Runtime Environment version 1.1 or higher. However, it is strongly recommended to

install Sun JVM 1.4. The Remote Console will behave exactly the same way as if you were sitting

directly in front of the screen of your remote system. That means that both the keyboard and mouse

can be used in the usual way. Open the console by selecting the preview picture on the main site of

the HTML front end. Figure 1-2 shows the top of the Remote Console.

Figure 1-2: Top part of the Remote Console

There are some options to choose from, and the important ones are the following:

Auto Adjust button

If the video displayed is of bad quality or distorted in some way, press this button and wait a few

seconds while IP-KVM switch tries to adjust itself for the best possible video quality.

Sync Mouse

Choose this option in order to synchronize the local with the remote mouse cursor. This is

especially necessary when using accelerated mouse settings on the host system. In general

there is no need to change mouse settings on the host.

Video Settings in Options Menu This opens a new window with elements to control the IP-KVM switch

Video Settings. You can change some values, for instance the brightness and contrast of the

picture displayed, which may improve the video quality. It is also possible to revert to the default

settings for all video modes or only the current one.

Note: At first start, if the local mouse pointer is not synchronized with

the remote mouse pointer, press the Auto Adjust Button once.

Single port KVM over IP switch

2. Introduction

Thank you for purchasing IP-KVM switch. IP-KVM switch can save your MONEY, TIME, SPACE,

EQUIPMENT and POWER. IP-KVM switch defines a new class of remote KVM access devices.

IP-KVM switch combines digital remote KVM access via IP networks with comprehensive and

integrated system management.

IP-KVM switch provides convenient, remote KVM access and control via LAN or Internet. It captures,

digitizes, and compresses video signal and transmits it with keyboard and mouse signals to and from

a remote computer. IP-KVM switch provides a non-intrusive solution for remote access and control.

Remote access and control software runs on its embedded processors only but not on mission-critical

servers, so that there is no interference with server operation or impact on network performance.

Furthermore, IP-KVM switch offers additional remote power management with the help of optional

available device.

IP-KVM switch supports consoles consisting of PS/2 style keyboards and mouse and HDDB 15 video

output. IP-KVM switch will automatically detect the current video mode of the console, however

manual fine-tuning is recommended to receive the best video quality. IP-KVM switch will accept video

streams up to 110 MHz dot clock. This results in a screen resolution of 1280x1024 pixels with a frame

rate of 60 Hz.

2.1. When the server is up and running

IP-KVM switch gives you a full control over the remote server. The Management Console allows you

to access the remote server’s graphics, keyboard and mouse and to send special commands to the

server. You can also perform periodic maintenance of the server. Using the Console Redirection

Service, you are able to do the following:

I. Reboot the system

II. Watch the boot process.

III. Boot the system from a separate partition to load the diagnostic environment.

IV. Run special diagnostic programs.

2.2. When the server is dead

Obviously, fixing hardware defects is not possible through a remote management device.

Nevertheless IP-KVM switch gives the administrator valuable information about the type of a hardware

failure. Serious hardware failures can be categorized into five different categories with different

chances to happen:

I. Hard disk failure 50%

II. Power cable detached, power supply failure 28%

III. CPU, Controller, main board failure 10%

IV. CPU fan failure 8%

V. RAM failure 4%

Using IP-KVM switch, administrators can determine which kind of serious hardware failure has

occurred (See table 2-1).

Single port KVM over IP switch

Type of failure Detected by

Hard disk failure Console screen, CMOS set-up information

Power cable detached, power supply failure Server remains in power on state after power on

command has been given.

CPU Controller, main board failure. Power supply is on, but there is no video output.

CPU fan failure By server specific management software

RAM failure Boot-Sequence on boot console

Table 2-1:Host system failures and how they are detected.

2.3. Features

zManage serves around the world

zKVM (keyboard, video, mouse) access over IP and analogous telephone line (modem needed).

zBIOS level access

zSSL encryption

zNo impact on server or network performance

zAutomatically senses video resolution for best possible screen capture

zHigh-performance mouse tracking and synchronization

zPort to connect a user console for direct analogous access to KVM switch

zLocal Mouse suppression (only when using SUN’s Java Virtual Machine)

zCan be used with any standard KVM

zRemote mass storage control.

2.4. Package contents

Base unit- Single port IP-KVM Switch 1 PC

User’s manual 1 PC

Installation software and User Manual on CD-ROM 1 PC

AC to DC Power Adapter 1 PC

Rack Mount Kit 1 SET

Null modem cable 1 PC

Single port KVM over IP switch

2.5. Technical specifications

Model No. Single port IP-KVM Switch

PC Port 1

Console Port 1

PC Port Connector

(All Female Types) PS/2 Keyboard Mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15 pin

USB Type B receptacle

Console Port

Connector

(All Female Types)

Local Console: PS/2 Keyboard Mini Din 6 pin

PS/2 Mouse Mini Din 6 pin

VGA HDDB 15pin

Remote Console: RJ-45 8P8C

Serial Port (DB9 pin

Male) 1

LAN port (RJ-45 8P8C) 1

10BASE-T Ethernet uses Category 3/4/5/5E/6 UTP

100BASE-T Ethernet uses Category 5/5E/6 UTP

Reset button 1

Keyboard Emulation PS/2

Mouse Emulation PS/2

VGA Resolution Local :1600 X1200 Remote : 1280 X1024

Housing Metal

Power Adapter DC 5V, 2.5A

Operation Temperature 0~50℃

Storage Temperature -20 ~ 60℃

Humidity 0~80%, Non-Condensing

Size Desktop

Weight (kg) 1700g

Dimension (mm) 156 X139 X27

2.6. System requirement

Item Description

Local console side One PS/2 Keyboard, one PS/2 Mouse

and one monitor

Remote Console

side One PC or Multiple PCs are linked into

the network

Computer side One PC or Server or the console port of

KVM switch unit

Single port KVM over IP switch

2.7. Cable diagrams

PS/2 Cable:

Mini Din 6 pin Male to Male

VGA Cable:

HDB15 pin Male to Male

USB 2.0 Cable:

USB A-B cable

AT to PS/2 keyboard adapter: (Optional)

Din 5 pins Male to Mini Din 6 pin Female

CAT5/5E/6 Straight Through UTP/STP Cable:

8P8C

Tabla de contenidos

Otros manuales de Cambiar de Avocent

Avocent

Avocent AMX5000 Manual de usuario

Avocent

Avocent AutoView 1000R Manual de usuario

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent AMX Switch Series Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR SWITCH - Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX Switch Series Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX Switch Series Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX Switch Series Manual de usuario

Avocent

Avocent KVM Switching Manual de usuario

Avocent

Avocent AMWorks Manual de usuario

Avocent

Avocent SwitchView SwitchView SC Manual de usuario

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent SwitchView SC4 UAD Manual de usuario

Avocent

Avocent AMX5020 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent AutoView 1415 Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 1515 Manual de usuario

Avocent

Avocent SwitchView SC120 Manual de usuario

Avocent

Avocent DSRTM 1021 Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 2020 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView IP 1020 Instrucciones de instalación y mantenimiento

Avocent

Avocent MPU1016-001 Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX5100 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario