Avocent SwitchView SC120 Manual de usuario

To Contact Avocent Technical Support: Visit www.avocent.com 590-718-501D

Avocent, the Avocent logo, Cybex and SwitchView are registered trademarks of Avocent Corporation or its afﬁliates in the U.S. and other countries. All other marks are the property of their respective owners.

The following instructions will

help you install your SwitchView

SC120/220/140/240 switch.

Should you require further assistance,

please contact Avocent Technical Support.

1Connecting local peripherals

Turn off all servers you plan to use with

your SwitchView SC120/220/140/240

switching system. Plug the VGA monitor

cable into the appropriate CONSOLE

port on the back of the switch. Plug

the USB or PS/2 keyboard cable and

USB or PS/2 mouse cable into the

appropriate ports.

2Connecting your servers

The SwitchView SC120/220 switching

system has two ports labeled PC1-PC2,

and the SwitchView 140/240 switching

system has four ports labeled PC1-PC4

on the rear of the switch. Plug the USB

cable or two PS/2 cables and the VGA

cable (monitor) into the corresponding

ports on the server. Plug the other ends

into one of the server port sets on the

switch. Repeat for all servers.

3Turning on your system

Connect the included power cord and

power supply. Plug the power supply

into the SC120/140/220/240 switch.

Plug the other end of the power cord

into an AC wall outlet. Turn on all

attached servers.

4Switching your servers

Press the corresponding front panel

button, labeled 1-2 on the SC120/220

switch or 1-4 on the SC140/240 switch,

to access servers in your SwitchView

switching system.

NOTE: This switch has tamper evident

seals. Broken or removed seals will void

the warranty.

5Using the front panel card reader

port

SwitchView SC220/240 switches are

equipped with a front panel USB port to

support Smart Card/Common Access

Card (CAC) functionality. Front panel

push-buttons allow you to switch KVM

sessions and the card reader together.

NOTE: An applicable USB CCID

[Integrated Circuit(s) Cards Interface

Devices] driver must be installed on the

target server to use this feature.

NOTE: Do not insert a Smart Card/

CAC into the reader until the switch is

fully conﬁgured and turned on.

LEDs

Each target port has two LEDs on

the front panel. The green LED will

light when the target device is on and

connected to the switch. The amber

LED will light when the target device is

selected (KVM session).

QUICK INSTALLATION GUIDE SwitchView®SC120/220/140/240 2/4-Port VGA/USB and PS/2 Switches

SwitchView SC240 switch shown

To Contact Avocent Technical Support: Visit www.avocent.com 590-718-501D

QUICK INSTALLATION GUIDE SwitchView®SC120/220/140/240 2/4-Port VGA/USB and PS/2 Switches

Supported Hardware

The SC120/220/140/240 switch

supports most VGA monitors and video

cards, USB keyboards, USB mice, USB

CCID Smart Card readers or CAC

readers, PS/2 keyboards and PS/2

mice.

Environmental

Operating Temperature:

32˚ (0˚C) to 104˚ (40˚C)

Storage Temperature:

-4˚ (-20˚C) to 122˚ (50˚C)

Operating Voltage 5 VDC

Power Frequency: N/A

Typical Power Consumption:

SwitchView SC120 switch (USB/PS2)

– 1.2W/1.2W (120V), 1.4W/1.39W

(240V)

SwitchView SC140 switch (USB/

PS2) – 1.2W/1.2W (120V), 1.3W/1.4W

(240V)

SwitchView SC220 switch (USB/PS2)

– 2W/2W (120V), 2.3W/2W (240V)

SwitchView SC240 switch (USB/

PS2) – 1.8W/1.8W (120V), 2.2W/2W

(240V)

Maximum Power Consumption:

SwitchView SC120 switch (USB only)

– 4.8W (120V), 4.7W (240V)

SwitchView SC140 switch (USB only)

– 4.4W (120V), 4.5W (240V)

SwitchView SC220 switch (USB/PS2)

– 6.2W/6.5W (120V), 6.3W/6.7W

(240V)

SwitchView SC240 switch (USB/PS2)

– 5.2W/6.2W (120V), 5.5W/6.5W

(240V)

NOTE: Power consumption ﬁgures were

determined by internal analysis. Typical

power consumption tests included

a keyboard, mouse and CAC reader

(SwitchView SC220/SC240 switch

only). Maximum power consumption

tests included a keyboard and mouse

and a 0.5A USB load on each USB port.

Mechanical

Approximate dimensions:

H x W x D = 1.7 in. [43.2 mm] X 10.4 in.

[264.2 mm] X 5.7 in. [144.8 mm]

Weight = 2.3 lbs. (1.0 kg)

Video Modes: VGA, SVGA, XGA,

SXGA, UXGA, WVGA, WSVGA,

WXGA, WSXGA, WUXGA and HDTV

Maximum Resolution: 2048 x 1536 @

85 Hz (monitor and video card support

for the maximum resolution will vary and

should be veriﬁed for compatibility)

Cables

Users can choose from 6 ft. or 12 ft.

cables for either USB or PS/2 and select

whether or not to use CAC functionality

(SC220/240 switch only).

Contact an Avocent representative for

ordering details.

Este manual sirve para los siguientes modelos

Otros manuales de Cambiar de Avocent

Avocent

Avocent SwitchView SC540 Manual de usuario

Avocent

Avocent DSR Series DSR4030 Manual de usuario

Avocent

Avocent AutoView 1415 Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView SC Manual de usuario

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent DSR Series DSR4160 Manual de usuario

Avocent

Avocent AutoView 1515 Manual

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent AMX5000 Manual de usuario

Avocent

Avocent AutoView Wireless Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1010 Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 1000R Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX Switch Series Instrucciones de instalación y mantenimiento

Avocent

Avocent MPU1016-001 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR4030 Manual de usuario

Avocent

Avocent DSR Series DSR1030 Instrucciones de instalación y mantenimiento

Avocent

Avocent ESP Serial Hub Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent AutoView 2030 Manual de usuario

Avocent

Avocent KVM Switching Manual de usuario

Avocent

Avocent DS1800 Manual de usuario

Avocent

Avocent CPS1610 Instrucciones de instalación y mantenimiento

Avocent

Avocent Eletric Keyboard Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 2000 Instrucciones de instalación y mantenimiento

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario