Avery Dennison Monarch 1115 Manual de usuario

Monarch ®

1115®Labeler

Operating Instructions

LOADING LABELS & SETTING PRINT BANDS

LOADING LABELS

1Slide label roll between hubs.

Discard first fourteen labels

and backing paper.

2Squeeze operating lever and feed

label strip over spring and under brake

wheels until about twelve labels come out.

3Feed label strip up under plate until

two labels come out. Rewind

label roll until loop is removed.

4Pull backing paper to the end of the

operating lever, separating labels from

backing paper.

5Tear backing paper evenly

between cuts, close to the end of the

strip as shown.

6Hold labeler upside down and while

squeezing operating lever, feed

backing paper into slot. Squeeze operating

lever eight times until backing paper comes

through the rear exit.

7If backing paper does not become

taut and exit at rear: Turn labeler

upside down, squeeze operating lever and

pull backing paper out of slot. Repeat

steps, 4, 5, and 6.

SETTING PRINT BANDS

1Pull the knob until the

indicators point to

the desired band.

4Print a sample label to insure

information is correct.

2Turn the knob untill the indicators

point to desired character or blank. 5If the character prints UPSIDE

DOWN, turn the band until you can

read the characters correctly. The desired

character may be coated with ink.

3Set all bands and push the knob

in all the way.

INKING

1Move two latch buttons toward

label roll and swing top cover

away from print head.

2Fold a piece of scrap backing

paper. 3Insert folded backing paper

between ink roll and carrier.

Pull to snap old ink roll free.

4Cut off end of ink roll package.

Using package to protect fingers,

slide carrier into package and snap new ink roll

into carrier.

5Snap top cover closed.

Hang for easy reference.

Brake

Wheels

Label Exit

Operating

Lever

Label Exit

Loop

Plate

Hub

Backing

Paper

Discarded

Labels

Slot

Backing

Paper Exit

Knob

Indicator

Blank Print

Positions

Top Cover

Latch

Button

INKING

Cap

End

Carrier

OPERATION

1Squeeze and release operating lever. 2Place black rollers on item to

be labeled.

3Pull labeler to apply label.

(Gentle wiping motion.) DO NOT POUND labeler when

applying labels.

REMOVING SUPPLIES

1Tear label strip at label roll as

shown and pull label roll from

between hubs.

2Tear backing paper strip.

Pull label strip from labeler. 3Squeeze and release operating

lever until backing paper is free

to be pulled out.

MAINTENANCE

1With label roll removed, check

label track and backing paper

track for stray labels.

2Clear label track by squeezing

operating lever and feeding label

removal strip under brake wheels and out

front of labeler.

3To clear backing paper track:

a. Insert label removal strip in end of

track to loosen stray labels.

b. Insert label removal strip as

shown, using corner to remove stray

labels.

LUBRICATION PRINT ADJUSTMENT

If adhesive buildup occurs, lubricate as shown

with labels loaded. 1Print location is correct when extreme

right-hand and left-hand characters are located

as shown.

Monarch lubricant is recommended.

2Place small coin in feedwheel button slot.

3Push feedwheel button IN COMPLETELY

and turn slightly clockwise if print is too far left or

slightly counterclockwise if print is too far right.

Adjustment made without completely depressing button

are temporary.

4Repeat steps 2 and 3 until print is correctly

located.

TROUBLESHOOTING

Black

Rollers

Pull Strip

Tear Backing

Paper

Tear

Brake

Wheels

Front

Exit

Removal

Strip

End of

Track

OPERATION, REMOVING SUPPLIES & MAINTENANCE

Feedwheel

Button Slot

Approx. 1/16 inch (1.6 mm)

Lubricate:

One drop each spot on

backing paper (total of

four drops). Spread

with finger.

Lubricate:

One drop each side of label

chute between spring and

backing paper.

DO NOT OVER

LUBRICATE!

Visit www.paxar.com for sales, service, supplies, information, and telephone

numbers of our locations throughout the world.

TOLL FREE:

1-800-543-6650 (In the U.S.A.)

1-800-263-4650 (In Canada)

Trouble Remedy

Characters not printing.

Bands not inked.

Check ink roll per Inking

instructions.

Labels feed slowly or

hesitantly.

Follow Lubrication and

Maintenance Instructions.

Labels will not feed. Reload per instructions. Use

correct supplies.

Follow Maintenance instructions.

Print incorrectly located. Follow Print Adjustment

instructions.

Printing smeared or

distorted.

Print several labels (15 to 25) to

use up excess ink.

Printing too light. Squeeze operating lever harder

during operation.

Warranties

Product warranty statements may vary from country to

country. Please contact the authorized PAXAR/Monarch

representative in your country for details.

LUBRICATION, PRINT LOCATION, & TROUBLESHOOTING

Tabla de contenidos

Otros manuales de Etiquetadora de Avery Dennison

Avery Dennison

Avery Dennison Monarch Freshmarx 9417+ Manual de servicio

Avery Dennison

Avery Dennison Monarch 9844 Manual de servicio

Avery Dennison

Avery Dennison Monarch FreshMarx 9417+ Solution Manual de servicio

Avery Dennison

Avery Dennison Monarch 1130 Manual de usuario

Avery Dennison

Avery Dennison AP5.4 Guía de solución de problemas

Avery Dennison

Avery Dennison ALX 92x Manual de usuario

Avery Dennison

Avery Dennison 221 RH Manual de usuario

Avery Dennison

Avery Dennison AP7.t Manual de instrucciones

Avery Dennison

Avery Dennison 230 RH Guía

Avery Dennison

Avery Dennison ALX 92x Manual de usuario

Avery Dennison

Avery Dennison FRESHMARX 9415 Manual de usuario

Avery Dennison

Avery Dennison ALS 341 Manual de usuario

Avery Dennison

Avery Dennison 64-Series Manual de usuario

Avery Dennison

Avery Dennison ALS 204 Manual de usuario

Avery Dennison

Avery Dennison ALX 92x Manual de usuario

Avery Dennison

Avery Dennison Monarch ADTP2 EcoCut Manual de usuario

Avery Dennison

Avery Dennison Labelers 1103-1110 Manual de usuario

Avery Dennison

Avery Dennison ALS 330/430 Manual de usuario

Avery Dennison

Avery Dennison ALS 230 Manual de usuario

Avery Dennison

Avery Dennison AP4.4 Manual de usuario

Avery Dennison

Avery Dennison ALS 204 Manual de usuario

Avery Dennison

Avery Dennison ALS 221 Manual de usuario

Avery Dennison

Avery Dennison ALS 450 Manual de usuario

Avery Dennison

Avery Dennison 64 Series Manual de usuario

Manuales populares de Etiquetadora de otras marcas

Brother

Brother P-Touch 2420PC Manual de usuario

newell

newell Dymo LabelManager 210D Manual de usuario

Brother

Brother TD-4000 Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Brother

Brother E300 Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Brother

Brother P-touch PT-9700PC Manual de usuario

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario

Novexx Solutions

Novexx Solutions XLP 604 Manual de usuario