AUDAC VEXO 8 Guía

VEXO 8

User & Installation

Manual

www.audac.eu

Introduction

Compact high power loudspeaker

The VEXO8 is a high-output loudspeaker cabinet, featuring an 8” high efficiency mid/

low range driver and 1” compression driver fitted with a 100° x 80° coverage horn,

providing a powerful and detailed sound in a compact cabinet.

The exceptional accuracy and clarity coming from this compact cabinet is recommended

to be extended with a complementary bass cabinet adding the punchy & deep bass,

resulting in a stunning sound over the entire frequency range.

Their elegant enclosure allows them to be used in modern & trendy installation

applications such as bars and nightclubs, while their functional features make them

perfect for use in compact mobile systems.

It delivers a powerful sound with an RMS rating of 175 Watt, and a maximum of 350 Watt.

Compression driver overload protection is provided through an internal limiting circuit.

Connections are made using two speaker connectors allowing linkthrough to other

cabinets. Mounting in both horizontal and vertical direction is possible with the included

wall bracket and the rotatable horn. An optional 35 mm pole adapter can be installed

when used in mobile applications.

The VEXO8 loudspeaker is available in Black (/B) or White (/W).

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER

THROW THEM AWAY

• ALWAYS HANDLE THIS UNIT WITH CARE

• CLEAN ONLY WITH DRY CLOTH

• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR

SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON

TOP OF THIS DEVICE

• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS

OR OTHER APPARATUS THAT PRODUCE HEAT

• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST,

HEAT, MOISTURE OR VIBRATION

• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE

MANUFACTURER.

• ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY

SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE

SPEAKER DOWN.

• DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE

SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL

DOWN

• ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.

ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

• CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF,

INFORM YOUR VENDOR IMMEDIATELY.

CAUTION

• USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER

• USE CABLES WITH CLEAR COLOUR CODING INDICATING THE POLARITY AND

MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.

• ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.

EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.

AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,

THINNER OR OTHER COMBUSTIBLES

• AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING

THE LOUDSPEAKER

• DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT

DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing

to qualified service personnel. Do not perform any servicing

(unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and

further relevant specifications described in following directives:

2004/108/EC (EMC) and 2006/95/EC (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be

disposed with regular houshold waste at the end of its product

life. This regulation is created to protect both the environment

and human health.

This product is developed and manufactured with high quality

materials and components which can be recycled and/or reused.

Please dispose this product to your local collection point or

recycling centre for electrical and electronic waste. This will

make to sure that it will be recycled on an environmentally friendly

manner, and will help to protect the environment in which we all

live.

Installing the VEXO

Revolving mounting bracket

Every VEXO speaker is standard delivered with a two-way revolving bracket, making it

possible to install the speaker at each location and focusing it into the desired direction.

The loudspeaker can be installed in both horizontal and vertical way using this mounting

bracket. The vertical installation method provides an additional advantage when the

installation height on the wall or ceiling is limited by focussing the loudspeaker more

directly downwards.

The two-way revolving bracket is made out of extra strong zinc-alloy material which

ensures a solid and secure mounting of the loudspeaker. One horizontal and one vertical

revolving point ensure easy focusing of the loudspeaker into any direction.

To realise an optimal installation, distribution of the forces on the revolving points and

freedom in focusing of the loudspeaker, it is recommended to install the swivel points of the

loudspeaker in a way that the revolving point on the wall plate is positioned in a horizontal

direction and the revolving point on the speaker plate is positioned in a vertical direction.

The speaker plate has to be be fixed to the loudspeaker cabinet by inserting the 4

supplied mounting screws into the pre-drilled and threaded holes at the back of the

speaker cabinet.

The wall plate has to be fixed to the wall by four screws with appropriate fasteners

depending of the installation surface (brick, concrete, wood, ...). The holes position

is made in a quadrangular shape with a mutual distance of 45 mm, as shown in the

drawing. The fixation ring on the included safety cable should be fixed around one

of the wall screws, while the snap hook shall be hooked around the eye-bolt on the

cabinet’s back.

Rotatable logo

Depending on the mounting direction of the loudspeaker (either horzontally or vertically),

the logo on the front grill of the loudspeaker that is held in place by a spring loaded

mechanism can be rotated into the direction the speaker is mounted.

By placing a flat object between the logo and the recessed surface in the grill and the

logo, the logo will move forward because of the spring loaded mechanism and can be

rotated into the right position.

Connecting

The wires coming from the amplifier should be

connected to the speaker connector on the back of

the loudspeaker. The used speaker connectors are

4-pin models whereto the full range signal should

be connected to +1/-1 terminals. The second

connector can be used for linking the signal coming

from the amplifier to other loudspeakers, resulting

in a parallel network of multiple loudspeakers.

Mind the polarity markings when wiring the loudspeaker cables.

WALL

SPEAKER

Additional Information

Technical specifications

RMS Power 175 Watt

Max. Power 350 Watt

Nominal impedance 8 Ohm

Sensitivity 1W / 1m 92 dB

Sound pressure Max W / 1m 115 dB

Frequency response -3 dB 65 Hz - 20 kHz

Frequency range -10 dB 55 Hz - 20 kHz

Cross-over frequency 1.25 kHz

Cross-over network Passive Built-in

Drivers 1” HF Compression horn tweeter

8” MF / LF woofer

Coverage 100° x 80° (rotatable)

Connectors 2 x Speaker connectors (linkthrough)

Mounting bracket 2-Way revolving Zinc-Alloy

Construction Medium density wood

with structured coating

Front finish Perforated steel grill

Colour VEXO8/W White (RAL9003)

VEXO8/B Black (RAL9004)

Dimensions 250 x 380 x 262 mm

Weight (Incl Bracket) 9.70 Kg

Packaging Carton box

Shipping weight & Volume 10.6 Kg - 0.050 Cbm

Accessories included 2-Way revolving mounting bracket

Steel safety cable with snap hook

Optional accessories WBP100 Wall bracket mounting plate

CHB196 35mm pole adapter

Tabla de contenidos

Otros manuales de Oradores de AUDAC

AUDAC

AUDAC WXMK2 Series Guía

AUDAC

AUDAC BASO Series Guía

AUDAC

AUDAC SPRING-FIT CENA306 Manual de usuario

AUDAC

AUDAC WX502B Instrucciones de instalación y funcionamiento

AUDAC

AUDAC WXMK2 Series Guía

AUDAC

AUDAC CALI Series Manual de usuario

AUDAC

AUDAC WX Series Guía

AUDAC

AUDAC CS55 Instrucciones de instalación y funcionamiento

AUDAC

AUDAC ALTI Series Guía

AUDAC

AUDAC ATEO M Series Manual de usuario

AUDAC

AUDAC VEXO1 A Series Manual de usuario

AUDAC

AUDAC Ateo 4D Guía

AUDAC

AUDAC XENO 8 Guía

AUDAC

AUDAC AXIR/O Series Manual de usuario

AUDAC

AUDAC SPRING-FIT CENA Series Manual de usuario

AUDAC

AUDAC NELO706V Series Manual de usuario

AUDAC

AUDAC XENO 6 Guía

AUDAC

AUDAC WMM630 Manual de usuario

AUDAC

AUDAC SPRING-FIT CENA510D Manual de usuario

AUDAC

AUDAC ATEO4 Manual de usuario

AUDAC

AUDAC HS212MK2 Guía

AUDAC

AUDAC HS208MK2 Guía

AUDAC

AUDAC CELO2D Guía

AUDAC

AUDAC VEXO208 Manual de usuario

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario