AUDAC Ateo 4 Guía

Ateo 4

User & Installation

Manual

www.audac.eu

Introduction

2-Way speaker with Clevermount™

The ATEO is a series of extraordinary loudspeakers especially designed for fixed install in

indoor applications, ranging from modern residential applications to the most demanding

designer applications in evironments such as retail stores, pubs, restaurants or even

clubs.

The ATEO 4 is the 4” version, with a 1” dome tweeter and a 4” Mid / Low frequency

driver, ensuring a true to- nature, high-fidelity reproduction of music and speech.

It features a stunning designed and elegant looking ABS housing which is fitted with

High-Quality components. What makes this loudspeaker range so exceptional is the

specially designed mounting bracket using the Clevermount™ technology, making the

loudspeakers cabinet flow together with the mounting bracket providing a great ease

for installing the loudspeaker in one good-looking entity.

The mounting and connection of the loudspeaker simply happens by attaching the

included metal wall-plate to the desired location. When mounted, the wires must be

connected to the desired terminal of the custom connection block. The desired power

tap for 100 Volt or 8 Ohm can be selected by picking the right terminal. After this is

done, only five seconds of work is left for clipping the loudspeaker onto the wall-plate,

tightening the safety screw and you’re ready to rock!

This way, it’s really a child’s play to install a large number of loudspeakers in no-time.

Even if you’re working all alone while people are watching your fingers or when installing

the speakers up high, when you’re standing on a ladder.

All Ateo series speakers are available in Black (/B) or White (/W).

Precautions

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

• ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER

THROW THEM AWAY

• ALWAYS HANDLE THIS UNIT WITH CARE

• CLEAN ONLY WITH DRY CLOTH

• HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS

• NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR

SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON

TOP OF THIS DEVICE

• DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS

OR OTHER APPARATUS THAT PRODUCE HEAT

• DO NOT PLACE THIS UNIT IN ENVIRONMENTS WITH A HIGH LEVEL OF DUST,

HEAT, MOISTURE OR VIBRATION

• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

• ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE

MANUFACTURER.

• ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY

SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE

SPEAKER DOWN.

• DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE

SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL

DOWN

• ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.

ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS

• CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.

IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF,

INFORM YOUR VENDOR IMMEDIATELY.

CAUTION

• USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER

• USE CABLES WITH CLEAR COLOUR CODING INDICATING THE POLARITY AND

MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.

• ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.

EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.

AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,

THINNER OR OTHER COMBUSTIBLES

• AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING

THE LOUDSPEAKER

• DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT

DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.

CAUTION - SERVICING

This product contains no user serviceable parts. Refer all servicing

to qualified service personnel. Do not perform any servicing

(unless you are qualified to do so.)

EC DECLARATION OF CONFORMITY

This product conforms to all the essential requirements and

further relevant specifications described in following directives:

2004/108/EC (EMC) and 2006/95/EC (LVD)

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

The WEEE marking indicates that this product should not be

disposed with regular houshold waste at the end of its product

life. This regulation is created to protect both the environment

and human health.

This product is developed and manufactured with high quality

materials and components which can be recycled and/or reused.

Please dispose this product to your local collection point or

recycling centre for electrical and electronic waste. This will

make to sure that it will be recycled on an environmentally friendly

manner, and will help to protect the environment in which we all

live.

Installing the ATEO

Clevermount™ Technology

Every Ateo speaker uses the unique Clevermount™ technology, making the loudspeakers

cabinet flowing together with the mounting bracket providing a great ease for installing

the loudspeaker in one good-looking entity.

Using this technology, the speaker can be installed at any location in both a horizontal and

vertical way, providing the possibility for pointing the speaker into the desired direction,

even after the speaker is already mounted and connected.

The horizontal installation method provides an additional advantage when the installation

height on the wall or ceiling is limited, while the directional capabilities make it easy to

determine and adjust the distribution of sound throughout the area.

The installation of the loudspeaker should be done according to a simple 5-step

procedure, which is described below:

Step 1: Attach the Wall Plate

The first step which should be taken is the mounting of the supplied wall plate to the

desired location on the wall. The wall plate has to be fixed by four screws in a quadrangu-

lar shape with a mutual distance of 30 mm horizontally and 55 mm vertically as indicated

in following drawing. The used fasteners should be chosen depending to the mounting

surface (brick, concrete, wood, ... ). Standard screws and wall plugs are included.

8 Ω

24 W

12 W

6 W

3 W

ATEO 4

Clevermount™





Step 2: Make the connections

After the wall plate is installed, the connections can be made. The Ateo

speaker can be connected in Low Impedance (8 Ohm) or High Impedance

(100 V) Systems. For use in High Impedance (100 V) systems, differ-

ent power taps are available for 24 Watt / 12 Watt / 6 Watt and 3 Watt.

The wires coming from the amplifier have to be connected to the correspond-

ing terminals of the special 6-pin Terminal block connector on the wall plate.

The common (‘COM’ or ‘-’) output of the amplifier should always be con-

nected to the ‘C’ terminal of the connector, while the positive (‘Sig’ or ‘+’) should

be connected to one of the other terminals, depending of the power or impedance.

Depending whether the speaker will be used in 8 Ohm or 100 Volt applications, a

jumper on the rear side of the loudspeaker has to be moved. When the speaker will

be used in 8 Ohm applications, the jumper should be placed in left position, while

using in 100 Volt applications, the jumper should be placed in the right position.

Mind the polarity markings when wiring the loudspeaker cables.

8 Ω

24 W

12 W

6 W

3 W

ATEO 4

Clevermount™

12070304800001

12070288900001

Designed in Belgium, Made in China

100 V

8 Ω

100 V

8 Ω

In most cases, the speaker cable will be provided through the wall, making the cable

completely invisible from outer side. In some cases, the cable should be fed from outer

side. For this purpose, a spot (marked in RED) with thinner material is provided at the

bottom side, which can be removed using a plier for feeding the cable into the circular

bracket.

Step 3: Attach the speaker

After the wall plate is mounted and the wires are connected, the loudspeaker can be

fixed to the wall plate. This should be done by sliding the hooks of the wall plate into

the slots on the back side of the speaker, followed by a downwards movement of the

loudspeaker (about 1 cm). Now, the loudspeaker is fixed and connected.

To prevent the loudspeaker from falling down under any circumstance, the security screw

on top of the circular bracket should be tightened.

Step 4: Position the loudspeaker

The last step in the mounting procedure of the speaker is pointing it into the desired

direction. This can be done after (carefully) removing the logo in the center of the front

grill and untightening the allen-key bolt which is located behind it. After this bolt is

untightened by a few turns, the speaker will be in a free state, making it possible to move

it into the left (30°), right (30°), up (5°) and down (30°) position. It can also be rotated

from vertical to horizontal position (rotate counter-clockwise).

Once the speaker is placed in position and pointing into the right direction, it can be

locked by tightening the allen-key bolt. Subsequently the logo should be placed again

in front of the allen-key bolt.

Step 5: Enjoy the music!

After the Ateo loudspeakers have been installed correctly, you deserve to have a short

break, relax and enjoy the sound of the Ateo speakers!

Additional Information

Technical specifications

Max. Power 70 Watt

RMS Power 35 Watt

Nominal impedance 8 Ohm

Line Transformer Power Taps 24 Watt / 417 Ohm

12 Watt / 833 Ohm

6 Watt / 1667 Ohm

3 Watt / 3333 Ohm

Sensitivity 1W / 1m 86 dB

Sound pressure Max W / 1m @ 8 Ohm 101 dB

Sound pressure Max W / 1m @ 100 V 100 dB

Frequency response -3 dB 100 Hz - 20 kHz

Drivers 1” HF Dome tweeter

4” MF / LF woofer

Connectors 6-pin custom Terminal-Block

Mounting bracket Clevermount™

Construction ABS

Front finish Fine perforated steel grill

Incline angle Left & Right 30°

Bottom 30°

Top 5°

Colour ATEO4/W White (RAL9010)

ATEO4/B Black (RAL9005)

Dimensions (W x H x D) 137 x 244 x 146 mm

Weight 2.05 Kg

Packaging Carton box

Shipping weight & Volume 5 Kg - 0.015 Cbm (2 pcs)

Accessories included Allen-key wrench

Screws and wall plugs

Tabla de contenidos

Otros manuales de Oradores de AUDAC

AUDAC

AUDAC Ateo 4D Guía

AUDAC

AUDAC AXIR Instrucciones de instalación y funcionamiento

AUDAC

AUDAC NELO706V Series Manual de usuario

AUDAC

AUDAC SPRING-FIT CENA506 Manual de usuario

AUDAC

AUDAC CS75B Manual de usuario

AUDAC

AUDAC ATEO M Series Manual de usuario

AUDAC

AUDAC VEXO208 Manual de usuario

AUDAC

AUDAC CS74 Manual de usuario

AUDAC

AUDAC VEXO112A Manual de usuario

AUDAC

AUDAC MERO5 Guía

AUDAC

AUDAC CSE55 Instrucciones de instalación y funcionamiento

AUDAC

AUDAC VEXO110A Manual de usuario

AUDAC

AUDAC CS85 Instrucciones de instalación y funcionamiento

AUDAC

AUDAC XENO 8 Guía

AUDAC

AUDAC AXIR/O Series Manual de usuario

AUDAC

AUDAC Ateo 6 Guía

AUDAC

AUDAC WX502 Instrucciones de instalación y funcionamiento

AUDAC

AUDAC SPRING-FIT CENA510D Manual de usuario

AUDAC

AUDAC CELO8 Guía

AUDAC

AUDAC AWP06 Manual de usuario

AUDAC

AUDAC HS212MK2 Guía

AUDAC

AUDAC CS75 Manual de usuario

AUDAC

AUDAC CENA706 Manual de usuario

AUDAC

AUDAC Outdoor Series Guía

Manuales populares de Oradores de otras marcas

argon audio

argon audio IE20 Manual de usuario

Denon

Denon SC-N7 Manual de usuario

Gemline

Gemline Ace 3952 Manual de usuario

Focal

Focal ON WALL 300 Manual de instrucciones

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manual de usuario

SoundLogic

SoundLogic BCCS-6/6395 Manual de usuario

Peavey

Peavey DTH 218 Manual de usuario

Avantree

Avantree Pluto Air Manual de usuario

Morel

Morel Integra Series INTEGRA OVATION 4 Manual de usuario

Oppo

Oppo SONICA Manual de usuario

Bose

Bose SoundLink Wireless Music System Manual de usuario

Rocksteady

Rocksteady Stadium Manual de usuario

Bowers & Wilkins

Bowers & Wilkins 4 Manual de usuario

Sonance

Sonance SONOS OUTDOOR Series Manual de usuario

Electro-Voice

Electro-Voice EVID FM4.2 Manual de usuario

Pioneer

Pioneer XW-HTD630 Manual de usuario

Onn

Onn BWA16AA002 Manual de usuario

HP GL313AA - USB Speakers PC Multimedia Manual de usuario