Antari WiFi-800 Manual de usuario

WiFi-800

Fog Machine User Manual

English Français Deutsch • • • 中文

This is world’s 1st SmartPhone controlled fog machine：Antari WiFi800 .

User Manual

Congratulations on the purchase of your new

ANTARI WiFi-800 FOG MACHINE.

Introduction

Thank you for choosing the ANTARI WiFi-800 Fog Machine. You now own a state-of-the-art

machine. Prior to use, we suggest that you carefully read all of the instructions. By following

the suggestions found in this user manual, you can look forward to the reliable and

satisfactory performance of your ANTARI Fog Machine for years to come.

Please follow these operation, safety and maintenance instructions to ensure a long and

safe life-time for your fog machine.

CAUTION:

Risk of electric shock. Disconnect the appliance from the electric supply before

refilling liquid, cleaning or performing maintenance on the machine.

Danger of Electric Shock

Household Use only. Not designed for outdoor use.

Use grounded electrical outlet only. Prior to use take care to determine that the unit is

installed at the rated voltage.

Always unplug your ANTARI Fog Machine before filling its liquid tank.

Always keep fog machine in upright position.

Turn off or unplug the machine when not in use.

This machine is not water-proof. Keep this device dry. Don’t immerse in water. If moisture,

water, or fog fluid gets inside the housing, immediately unplug the unit and contact an

authorized service technician or your ANTARI dealer before using it again.

No user serviceable parts inside. Refer to your ANTARI dealer or qualified service

personnel.

Danger of Burns

This device is for adult use only and must be installed out of the reach of children. Never

leave the unit running unattended.

Never aim the output nozzle directly at people.

Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during

operation.

Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to

guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides

and top of the unit.

Never aim the output nozzle at flames.

If the supply cord is damaged, it must be replaced by manufacturer or its service agent or

qualified personnel in order to avoid a hazard.

Always let yourANTARI Fog Machine cool down before cleaning or service.

Danger of Explosion

Never add flammable liquids (such as oil, gas, perfume) to the fog liquid tank.

Use only high-quality, water-based fog liquid that your dealer recommends. Other fog

liquids may cause clogging or damage fog machine.

Always make sure there is sufficient liquid in the tank. Operating this unit without liquid

will cause damage to the pump as well as over-heating of the heater.

If your ANTARI fog machine fails to work properly, discontinue use immediately. Drain

all fog liquid from the tank, pack the unit securely (preferably in the original packing

material), and return it to yourANTARI dealer for service.

Always empty fluid tank before posting or transporting this unit.

Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in

contact with skin or eyes, rinse thoroughly with water.

Note: Pay attention to all warning labels and instructions printed on the exterior of your

ANTARI Fog Machine

Unpacking & Inspection

Open the shipping carton and verify that all equipment necessary to operate the system has

arrived intact.

The shipping carton should contain the following items:

1. One unit of Antari WiFi-800 Fog Machine

2. Power cord

3. User Manual

If any equipment is missing contact your ANTARI dealer immediately.

Before beginning your initial setup on ANTARI WiFi-800 Fog Machine, make sure that there

is no evident damage caused by transportation. In the event that the unit’s housing or

cable is damaged, do not plug it in and do not attempt to use it until after contacting your

ANTARI dealer for assistance.

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Step 4: Turn on the machine and allow it to heat up, while the machine is heating up the

LED status light on pushbutton will “Flash Red”. Heat up takes approximately 2 minutes.

Once the machine has reached operating temperature, the status LED will light “Solid Red”.

Now the machine is ready for operation.

Step 5: To start making smoke, press the pushbutton locates on the handle; release

pushbutton to stop.

Step 6: To turn off the machine, put the power switch to the OFF position.

App Download

Downloading the application

the WiFi-800 using your mobile devices with iOS / Android operating systems.

Connecting mobile devices with iOS / Android to WiFi-800

Step 1: On your mobile devices, select Settings > Wi-Fi > list of available Wi-Fi device will

be shown.

Step 2: Select WIFI800-0000XXXX (e.g. WIFI800-00001001).

“0000XXXX” is based on the last four digits of the serial number, which is printed on the rear

of the machine (near the power cord). It is also the default SSID and password.

Step 3: A password query is displayed.

The password is an 8-digit number, based on the last four digits of the serial number (e.g.

00001001).

Enter the password to connect to the machine, and wait until the network name is checked.

Controlling

The Fog 800 application provides you two ways to control your WiFi-800 fog machine:

Timer Mode –allows you to set the fog duration time. Slide the time bar (from 1 to 60

seconds); press ON to start emitting fog. The fog emission will stop once the timer counts

down to zero.

Continuous Mode –simply press the ON button to emit fog. The machine continuously emits

fog; to stop press the OFF button.

Note: If the ON button is pressed and the machine cannot emit fog, please make sure the

continuous cycle button is turn on.

Advanced Wi-Fi settings

Wi-Fi settings are intended for users with advanced knowledge only.

A web-based configuration panel allows you to customize your Wi-Fi settings. To start the

configuration, first establish a Wi-Fi connection with the machine, then open a web browser,

enter http://192.168.16.254 and when the login window appears enter the default user name

admin and password admin.

The configuration panel is displayed.

Wireless settings > Basic

Network Mode

Select one of the following that meets your clients

11b/g mixed mode

11b only

11g only

11b/g/n mixed mode default

11n only(2.4G)

Network Name(SSID)

The name of your wireless network, create a name

for your wireless network using up to 32 characters.

Broadcast Network

Name(SSID)

Enable is default setting. If Disable is selected, the

SSID of the machine will not be seen. The wireless

client will have to know the SSID in order to connect

to it.

AP Isolation

Preventing devices connected to AP from

communicating directly with each other. Default is

set to Disable.

Frequency (Channel)

Select transmitting frequency.

Wireless Settings > Security

SSID choice

Select a SSID to start configuration

Security Mode

Choose one of the following mode for data

protection:

Disable

OPENWEP

WPA-PSK

WPA2-PSK

WPAPSKWPA2PSK (default)

WPA Algorithms

TKIP

AES

TKIPAES

Pass Phrase

Setup password

Key Renewal interval

Enter the amount of time before the group key used

for broadcast and multicast data is changed (3600

is default)

Administration > Management

Account

Change login account name (default is admin)

Password

Change login password (default is admin)

Otros manuales para WiFi-800

Tabla de contenidos

Idiomas:

Otros manuales de Máquina de niebla de Antari

Antari

Antari Z-1000X MK3 Manual de usuario

Antari

Antari B-200 Manual de usuario

Antari

Antari FT-100 Fire Training Manual de usuario

Antari

Antari SW-250 Manual de usuario

Antari

Antari M-11 Manual de usuario

Antari

Antari Z Series Manual de usuario

Antari

Antari Z-80 Manual de usuario

Antari

Antari Fazer X-310 PRO Manual de usuario

Antari

Antari FT-200 Manual de usuario

Antari

Antari Fogger X-510II Manual de usuario

Antari

Antari ICE-101 Manual de usuario

Antari

Antari M-5 Manual de usuario

Antari

Antari M-11 Manual de usuario

Antari

Antari W-715 Fog Jet Manual de usuario

Antari

Antari CINEMA HAZE CH-1 Manual de usuario

Antari

Antari F-80Z Guía de solución de problemas

Antari

Antari Z-380 Manual de usuario

Antari

Antari WiFi-800 Manual de usuario

Antari

Antari HZ-300 Manual de usuario

Antari

Antari F-4 Fazer Manual de usuario

Antari

Antari Z II Series Manual de usuario

Antari

Antari M-4 Manual de usuario

Antari

Antari Z-300II Fazer Manual de usuario

Antari

Antari M-7X Manual de usuario

Manuales populares de Máquina de niebla de otras marcas

Boost

Boost BOOST-FOG400LED-BK Manual de usuario

Home Accents Holiday

Home Accents Holiday FM1000-ASH Manual de usuario

EuroLite

EuroLite ZEITGEIST FOG-1200 Manual de usuario

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Manual de usuario

PROEL

PROEL DRAGO HEAVY PLFD150HY Manual de usuario

Sparklyn

Sparklyn Y846 Manual de usuario

Magicfx

Magicfx CO2 Gun Manual de usuario

Ibiza

Ibiza LSM500LAS Manual de usuario

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Manual de usuario

High End

High End F-100 Manual de usuario

Chauvet

Chauvet ARENA 2100 FLEX Manual de usuario

Beamz

Beamz F1600 Manual de usuario

Sagitter

Sagitter SG ARS900C Manual de usuario

KISANKRAFT

KISANKRAFT KK-STF-480 Manual de usuario

Orion

Orion OT-U250PP Guía

Beamz

Beamz S2500 Manual de usuario

American DJ

American DJ Dyno-Fog II Manual de usuario

JB Systems

JB Systems FX 1700 Manual de usuario