Anritsu MT1000A Network Master Pro Manual de usuario

MT1000A

MU100010A

Network Master Pro

Operation Manual

Eighth Edition

For safety and warning information, please read this

manual before attempting to use the equipment.

Keep this manual with the equipment.

ANRITSU CORPORATION

Document No. M-W3682AE-8.0

MT1000A/MU100010A

Network Master Pro

Operation Manual

25 June 2014 (First Edition)

18 September 2015 (Eighth Edition)

permission of the publisher.

The contents of this manual may be changed without prior notice.

Printed in Denmark

MT1000A Network Master Pro Page 2

About This Manual

The documentation for MT1000A Network Master Pro applies to the instrument with the

MU100010A 10Gig Multirate Module installed. This operation manual describes both the

basic operation of the instrument as well as the operations available via interface options

and predefined applications/tests.

MT1000A/MU100010A Network Master Pro Operation Manual (this manual)

Operations for the MT1000A Network Master Pro mainframe with 10G Multirate

module (MU100010A) are described.

MT1000A/MU100010A Network Master Pro Quick Reference Guide

A printed quick user's guide that introduces the basic operation of the instrument.

MT1000A Network Master Pro MT1100A Network Master Flex

Remote Scripting Operation Manual

Operations of the command-based Remote Control function are described.

Manual structure

The contents of the manual is structured in the following way:

Chapter 1 - Introduction

Chapter 2 - Configuration

Chapter 3 - Man-Machine-Interface

Chapter 4 - Graphical User Interface

Chapter 5 - SDH/SONET/PDH/DSn Applications

Chapter 6 - Ethernet Application

Chapter 7 - OTN Applications

Chapter 8 - CPRI/OBSAI Applications

Chapter 9 - Fibre Channel (FC) Applications

Chapter 10 - Utility Applications

Chapter 11 - Specifications

Chapter 12 - Support

Chapter 4 consists of a general introduction to the GUI. Chapters 5-9 contain descriptions

of each screen, sub-screen and major dialog. The descriptions are provided in the

following order:

Setup and result screens for each application. The applications are described in the

same order as they appear on the application selector screen.

Ports setup screens and status information for each interface type.

Sub-screens and dialogs boxes are described under the main screen from which they are

activated/launched.

This operation manual assumes the reader has the following basic knowledge:

Ethernet, SDH/SONET, PDH/DSn, OTN, CPRI/OBSAI, Fibre Channel, handling optical

parts

MT1000A Network Master Pro Page 3

4
15
16
17
18
18
18
18
18
18
20
22
23
24
24
24
24
26
26
27
28
28
28
29
29
30
30
31
31
31
32
32
33
33
33
37
38
39
39
41
42
42
43
44
44
44
45
45
46
47
47
48
49
Table of Contents
0 Table of Contents
1 Introduction
1.1 Mainframe
1.2 10G Multirate Module (MU100010A)
1.3 Symbols and Conventions
1.3.1 Symbols Used in Manual
1.3.2 Safety Symbols Used on Equipment
1.3.3 Notes
1.3.4 Hints
1.3.5 Option
1.4 Warnings
1.5 Cautions
1.5.1 Cautions against Computer Virus Infection
1.6 Precautions
1.6.1 ESD (Electrostatic Discharge)
1.6.2 Optical Surfaces
1.6.3 Cautions on Handling Optical Fiber Cables
1.6.4 Ventilation
1.6.5 Countries and Regions Permitting WLAN Use
2 Configuration
2.1 Delivered Accessories
2.1.1 Standard Accessories
2.1.2 Optional Accessories
2.2 Mains Power Adapter
2.2.1 Connecting Mains Power Adapter
2.3 Rechargeable Battery
2.3.1 Installing or Replacing Battery
2.3.2 Charging Battery in Fast Mode
2.3.3 Charging Battery in Normal Mode
2.3.4 Battery Status Information
2.4 Measurement Cables
2.4.1 Connecting Measurement Cables
2.5 Support Stand and Carrying Strap
2.5.1 Support Stand
2.5.2 Carrying Strap and Handle
3 Man- Machine-Interface
3.1 Touch Screen Display
3.2 Key Operation
3.2.1 Power Button
3.3 Head Set
3.4 Connector Panel
3.4.1 Test Interfaces
3.4.2 Service Interfaces
3.5 Remote Operation
3.5.1 Installation of Control Software
3.5.2 Connection and Setup
3.5.3 Communication Ports
3.5.4 Starting Control Software
3.5.5 Remote Upgrade
3.5.6 Remote Wake Up
3.5.7 Remote Reset
3.5.8 Stand-alone Editor
3.6 Command-Based Remote Control
Table of Contents
MT1000A Network Master Pro Page 4

49
50
50
50
52
53
55
56
56
56
58
59
62
62
64
65
66
67
67
68
68
78
84
84
84
84
85
85
87
88
88
88
89
93
93
93
94
94
95
96
97
98
99
99
100
101
101
102
102
102
103
107
107
107
108
3.7 File Access via USB Interface
3.8 File Access via Ethernet Interface
3.8.1 Accessing files in Network Master from the PC
3.8.2 Mounting the Shared Folder of Networked PC to the Network
Master
3.9 External GPS Receiver
3.10 Remote Control via GPIB
4 Graphical User Interface
4.1 General Handling of the GUI
4.1.1 GUI Concept
4.1.2 Navigating in the GUI
4.1.3 Layout of the GUI Screens
4.1.3.1 Starting the Application
4.1.3.2 Switching the Applications
4.1.3.3 Operating the Application
4.1.4 Lamp Indication of Alarm/Error Status
4.1.4.1 Test Status Summary
4.1.5 Keypads for Entering Text in Fields
4.1.6 User Pattern Editor
4.1.7 Prompts to Confirm Dependencies
4.2 Toolbars
4.2.1 Instrument Toolbar
4.2.2 Application Toolbar
4.3 Startup and Switch-off Sequences
4.3.1 Instrument Startup
4.3.2 Application Startup
4.3.3 Accessing Previous Tests and Test Results
4.3.4 Closing an Application
4.3.5 Switching Off the Instrument
5 SDH/SONET/PDH/DSn Applications
5.1 SDH Setup and Status
5.1.1 Transmitter Setup
5.1.1.1 Physical Setup
5.1.1.2 SDH Frame Setup
5.1.2 Receiver Setup
5.1.2.1 Physical Setup
5.1.2.2 SDH Frame Setup
5.1.3 Status Information
5.1.3.1 Status Summary
5.1.3.2 Physical Details
5.1.3.3 Alarms and Errors
5.1.3.4 OH capture
5.1.3.5 Tributary scan
5.1.3.6 Transceiver
5.1.4 Errors/Alarms Insertion
5.1.4.1 SDH Alarms/Errors
5.1.4.2 SDH frequency
5.1.4.3 SDH pointer
5.2 SONET Setup and Status
5.2.1 Transmitter Setup
5.2.1.1 Physical Setup
5.2.1.2 SONET Frame Setup
5.2.2 Receiver Setup
5.2.2.1 Physical Setup
5.2.2.2 SONET Frame Setup
5.2.3 Status Information
Table of Contents
MT1000A Network Master Pro Page 5

108
109
109
110
110
110
110
111
111
111
112
116
116
118
120
120
121
121
122
123
124
125
126
126
127
128
128
128
129
133
133
133
135
135
136
136
137
137
138
138
138
139
139
139
140
141
141
141
142
142
143
143
143
144
144
144
145
147
5.2.3.1 Status Summary
5.2.3.2 Physical Details
5.2.3.3 Alarms and Errors
5.2.3.4 OH Capture
5.2.3.5 Tributary Scan
5.2.3.6 Transceiver
5.2.4 Errors/Alarms Insertion
5.3 E1 Setup and Status
5.3.1 Transmitter Setup
5.3.1.1 Physical Setup
5.3.1.2 E1 Signal Setup
5.3.2 Receiver Setup
5.3.2.1 Physical Setup
5.3.2.2 E1 Signal Setup
5.3.3 Status Information
5.3.3.1 Status Summary
5.3.3.2 Physical Details
5.3.3.3 Alarms and Errors
5.3.3.4 Alignment
5.3.3.5 CAS
5.3.3.6 Audio
5.3.3.7 Traffic
5.3.4 Errors/Alarms Insertion
5.3.4.1 PDH Alarms/Errors
5.3.4.2 PDH frequency
5.4 DS1/J1 Setup and Status
5.4.1 Transmitter Setup
5.4.1.1 Physical Setup
5.4.1.2 DS1/J1 Signal Setup
5.4.2 Receiver Setup
5.4.2.1 Physical Setup
5.4.2.2 DS1/J1 Signal Setup
5.4.3 Status Information
5.4.3.1 Status Summary
5.4.3.2 Physical Details
5.4.3.3 Alarms and Errors
5.4.3.4 Alignment
5.4.3.5 CAS
5.4.3.6 Audio
5.4.3.7 Traffic
5.4.4 Errors/Alarms Insertion
5.5 E3 Setup and Status
5.5.1 Transmitter Setup
5.5.1.1 Physical Setup
5.5.1.2 E3 Signal Setup
5.5.2 Receiver Setup
5.5.2.1 Physical Setup
5.5.2.2 E3 Signal Setup
5.5.3 Status Information
5.5.3.1 Status Summary
5.5.3.2 Physical Details
5.5.3.3 Alarms and Errors
5.5.4 Errors/Alarms Insertion
5.6 DS3 Setup and Status
5.6.1 Transmitter Setup
5.6.1.1 Physical Setup
5.6.1.2 DS3 Signal Setup
5.6.2 Receiver Setup
Table of Contents
MT1000A Network Master Pro Page 6

147
148
149
149
149
149
150
151
152
152
152
153
153
153
154
155
155
155
155
156
157
157
157
157
158
158
158
159
160
160
161
161
161
161
163
164
164
165
166
167
172
172
172
172
173
173
173
173
174
174
175
176
176
176
177
179
179
5.6.2.1 Physical Setup
5.6.2.2 DS3 Signal Setup
5.6.3 Status Information
5.6.3.1 Status Summary
5.6.3.2 Physical Details
5.6.3.3 Alarms and Errors
5.6.3.4 Alignment
5.6.4 Errors/Alarms Insertion
5.7 E4 Setup and Status
5.7.1 Transmitter Setup
5.7.1.1 Physical Setup
5.7.1.2 E4 Signal Setup
5.7.2 Receiver Setup
5.7.2.1 Physical Setup
5.7.2.2 E4 Signal Setup
5.7.3 Status Information
5.7.3.1 Status Summary
5.7.3.2 Physical Details
5.7.3.3 Alarms and Errors
5.7.4 Errors/Alarms Insertion
5.8 APS
5.8.1 Ports Setup and Status
5.8.2 Test Setup
5.8.2.1 Threshold
5.8.3 Test Results
5.8.3.1 Summary
5.8.3.2 Details for APS
5.8.3.3 Protocol interpretation
5.8.3.4 Event Log
5.8.3.5 Statistics
5.9 BERT
5.9.1 Ports Setup and Status
5.9.2 Test Setup
5.9.2.1 Control
5.9.2.2 Thresholds
5.9.3 Test Results
5.9.3.1 Summary
5.9.3.2 Pointer Movement
5.9.3.3 Event Log
5.9.3.4 Statistics
5.10 RTD
5.10.1 Ports Setup and Status
5.10.2 Test Setup
5.10.2.1 Control
5.10.2.2 Threshold
5.10.3 Test Results
5.10.3.1 Summary
5.10.3.2 Detailed
5.10.3.3 Event Log
5.10.3.4 Statistics
6 Ethernet Applications
6.1 Ethernet Setup and Status
6.1.1 Physical Port Setup
6.1.1.1 Port configuration parameters
6.1.1.2 Port Setup (detailed mode)
6.1.2 Ethernet Frame Setup
6.1.2.1 WAN
Table of Contents
MT1000A Network Master Pro Page 7

179
199
199
201
202
207
218
220
220
221
222
223
223
224
226
228
230
231
231
232
233
233
234
234
234
234
236
237
239
240
240
242
243
243
243
248
248
250
250
250
250
250
250
250
251
251
252
252
252
253
253
253
253
253
253
254
254
254
6.1.2.2 Stream
6.1.2.3 Swap
6.1.2.4 Settings
6.1.2.5 SyncE
6.1.2.6 IEEE 1588v2
6.1.2.7 OAM
6.1.2.8 Filter
6.1.3 Status Information
6.1.3.1 Status Summary
6.1.3.2 Physical Details
6.1.3.3 Interface
6.1.3.4 OH Capture
6.1.3.5 SyncE
6.1.3.6 IEEE 1588v2
6.1.3.7 OAM
6.1.3.8 Frame Capture
6.1.3.9 Transceiver
6.1.4 Errors/Alarms Insertion
6.1.4.1 Ethernet LAN
6.1.4.2 Ethernet PCS alarms/errors
6.1.4.3 Ethernet WAN
6.1.4.4 Ethernet frequency
6.2 BERT
6.2.1 Ports Setup and Status
6.2.2 Test Setup
6.2.2.1 Control
6.2.2.2 Generator
6.2.2.3 Stream
6.2.2.4 Thresholds
6.2.3 Test Results
6.2.3.1 Summary
6.2.3.2 IEEE1588v2 Log
6.2.3.3 OAM Log
6.2.3.4 Event Log
6.2.3.5 Statistics
6.3 Cable
6.3.1 Test Setup
6.4 Channel Statistics
6.4.1 Ports Setup and Status
6.4.2 Test Setup
6.4.2.1 Control
6.4.2.2 Generator
6.4.2.3 Stream
6.4.2.4 Definitions
6.4.3 Test Results
6.4.3.1 Summary
6.4.3.2 IEEE1588v2 Log
6.4.3.3 Event Log
6.4.3.4 Statistics
6.5 Mon/Gen
6.5.1 Ports Setup and Status
6.5.2 Test Setup
6.5.2.1 Control
6.5.2.2 Generator
6.5.2.3 Streams
6.5.2.4 Thresholds
6.5.3 Test Results
6.5.3.1 Summary
Table of Contents
MT1000A Network Master Pro Page 8

256
256
256
257
260
260
260
260
260
261
261
261
261
262
262
262
263
263
263
263
264
264
265
265
266
266
266
267
267
267
267
268
268
268
268
271
273
273
274
275
276
277
278
278
279
280
280
281
281
281
281
283
283
283
283
285
285
287
6.5.3.2 IEEE1588v2 Log
6.5.3.3 OAM Log
6.5.3.4 Event Log
6.5.3.5 Statistics
6.6 Pass Through
6.6.1 Ports Setup and Status
6.6.2 Test Setup
6.6.2.1 Control
6.6.2.2 Thresholds
6.6.3 Test Results
6.6.3.1 Summary
6.6.3.2 Event Log
6.6.3.3 Statistics
6.7 Ping
6.7.1 Ports Setup and Status
6.7.2 Test Setup
6.7.3 Test Results
6.7.3.1 Summary
6.7.3.2 IEEE1588v2 Log
6.7.3.3 Detailed
6.7.3.4 Event Log
6.7.3.5 Statistics
6.8 Reflector
6.8.1 Ports Setup and Status
6.8.2 Test Setup
6.8.2.1 Control
6.8.2.2 Thresholds
6.8.3 Test Results
6.8.3.1 Summary
6.8.3.2 Event Log
6.8.3.3 Statistics
6.9 RFC 2544
6.9.1 Ports Setup and Status
6.9.2 Test Setup
6.9.2.1 Control
6.9.2.2 Throughput
6.9.2.3 Frame Loss
6.9.2.4 Throughput and Frame Loss
6.9.2.5 Latency
6.9.2.6 Burst
6.9.2.7 Advanced
6.9.3 Test Results
6.9.3.1 Summary
6.9.3.2 Throughput
6.9.3.3 Frame loss
6.9.3.4 Throughput and frame loss
6.9.3.5 Latency
6.9.3.6 Burst
6.9.3.7 Event Log
6.9.3.8 Statistics
6.9.4 Throughput Calculation
6.10 RFC 6349
6.10.1 Ports Setup and Status
6.10.2 Test Setup
6.10.2.1 Control
6.10.2.2 MTU / RTT
6.10.2.3 Windows Scan / Throughput
6.10.2.4 Multi-Service
Table of Contents
MT1000A Network Master Pro Page 9

287
288
288
289
289
290
291
291
292
292
292
292
295
300
300
301
301
302
303
303
304
304
304
305
305
305
306
306
307
308
308
308
309
310
312
319
319
319
320
320
321
322
323
323
324
324
324
325
327
328
329
330
330
332
332
333
333
6.10.3 Test Results
6.10.3.1 Summary
6.10.3.2 RFC 6349 Metrics
6.10.3.3 Window Scan
6.10.3.4 Throughput
6.10.3.5 Multi-Service
6.10.3.6 Event Log
6.10.3.7 Statistics
6.11 SAT 1564
6.11.1 Ports Setup and Status
6.11.2 Test Setup
6.11.2.1 Control
6.11.2.2 Services
6.11.2.3 Advanced
6.11.3 Test Results
6.11.3.1 Summary
6.11.3.2 Configuration Test
6.11.3.3 Performance Test
6.11.3.4 Event Log
6.11.3.5 Statistics
6.12 Traceroute
6.12.1 Ports Setup and Status
6.12.2 Test Setup
6.12.3 Test Results
6.12.3.1 Summary
6.12.3.2 IEEE1588v2 Log
6.12.3.3 Event Log
6.12.3.4 Statistics
7 OTN Applications
7.1 OTN Setup and Status
7.1.1 Transmitter Setup
7.1.1.1 Physical Setup
7.1.1.2 OTUk Frame Setup
7.1.1.3 Mapping
7.1.1.4 Overhead
7.1.1.5 TP/TS
7.1.1.6 GFP-T
7.1.1.7 GFP-F
7.1.2 Receiver Setup
7.1.2.1 Physical Setup
7.1.2.2 OTUk Frame Setup
7.1.2.3 TP/TS
7.1.2.4 TTI detection
7.1.2.5 MSIM detection
7.1.3 Status Information
7.1.3.1 Status Summary
7.1.3.2 Physical Details
7.1.3.3 Alarms and Errors
7.1.3.4 OH capture
7.1.3.5 Tributary scan
7.1.3.6 Transceiver
7.1.4 Error/Alarm Insertion
7.1.4.1 OTN
7.1.4.2 OTN frequency
7.1.4.3 OTN justification
7.2 APS
7.2.1 Ports Setup and Status
Table of Contents
MT1000A Network Master Pro Page 10

Otros manuales para MT1000A Network Master Pro

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Anritsu

Anritsu

Anritsu MP1590B Manual de usuario

Anritsu

Anritsu MP1590B Manual de usuario

Anritsu

Anritsu MT9812B Manual de usuario

Anritsu

Anritsu MD1230B-26 Manual de usuario

Anritsu

Anritsu MT8860C Manual de usuario

Anritsu

Anritsu MG3641A Manual de usuario

Anritsu

Anritsu MN469xC Series Manual de usuario

Anritsu

Anritsu MP1800A Manual de usuario

Anritsu

Anritsu Network master Pro Manual de usuario

Anritsu

Anritsu MS9720A Manual de usuario

Anritsu

Anritsu AutoCal 36581NNF Manual de usuario

Anritsu

Anritsu MD8480A Manual de usuario

Anritsu

Anritsu MG369 A Series Manual de usuario

Anritsu

Anritsu MT9810A Manual de usuario

Anritsu

Anritsu MN469xC Series Manual de usuario

Anritsu

Anritsu MT1000A Network Master Pro Manual de usuario

Anritsu

Anritsu MG3641A Manual de usuario

Anritsu

Anritsu MT1000A Network Master Pro Manual de usuario

Anritsu

Anritsu MS8911A Manual de usuario

Anritsu

Anritsu MP1590B-30 Manual de usuario

Anritsu

Anritsu Site Master S251B Manual de usuario

Anritsu

Anritsu Site Master S112 Manual de usuario

Anritsu

Anritsu VectorStar MN4690B Series Manual de usuario

Anritsu

Anritsu 693 B Series Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario